Use the newly created mx5 default pin initialization functions in mx5 board files.
Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com Cc: Stefano Babic sbabic@denx.de --- .../board/efikamx/efikamx.c | 133 ++------------------ .../board/freescale/mx51evk/mx51evk.c | 121 +----------------- .../board/ttcontrol/vision2/vision2.c | 72 +---------- 3 files changed, 15 insertions(+), 311 deletions(-)
diff --git u-boot-4d3c95f.orig/board/efikamx/efikamx.c u-boot-4d3c95f/board/efikamx/efikamx.c index e88b2ed..6810433 100644 --- u-boot-4d3c95f.orig/board/efikamx/efikamx.c +++ u-boot-4d3c95f/board/efikamx/efikamx.c @@ -143,38 +143,12 @@ int dram_init(void) }
/* - * UART configuration - */ -static void setup_iomux_uart(void) -{ - unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE | - PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH; - - mxc_request_iomux(MX51_PIN_UART1_RXD, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_UART1_RXD, pad | PAD_CTL_SRE_FAST); - mxc_request_iomux(MX51_PIN_UART1_TXD, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_UART1_TXD, pad | PAD_CTL_SRE_FAST); - mxc_request_iomux(MX51_PIN_UART1_RTS, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_UART1_RTS, pad); - mxc_request_iomux(MX51_PIN_UART1_CTS, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad); -} - -/* * SPI configuration */ #ifdef CONFIG_MXC_SPI static void setup_iomux_spi(void) { - /* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */ - mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - - /* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */ - mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mx51_ecspi1_init_pins();
/* Configure SS0 as a GPIO */ mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_GPIO); @@ -183,16 +157,6 @@ static void setup_iomux_spi(void) /* Configure SS1 as a GPIO */ mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_GPIO); gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS1), 1); - - /* 000: Select mux mode: ALT0 mux port: SS2 of instance: ecspi1. */ - mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); - - /* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */ - mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); } #else static inline void setup_iomux_spi(void) { } @@ -333,7 +297,12 @@ int board_mmc_init(bd_t *bis) int ret; uint32_t cd = efika_mmc_cd();
- /* SDHC1 is used on all revisions, setup control pins first */ + /* SDHC1 is used on all revisions */ + + /* SDHC1 IOMUX */ + mx51_esdhc1_init_pins(); + + /* SDHC1 Control lines IOMUX */ mxc_request_iomux(cd, IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); mxc_iomux_set_pad(cd, @@ -354,65 +323,8 @@ int board_mmc_init(bd_t *bis) /* Internal SDHC1 IOMUX + SDHC2 IOMUX on old boards */ if (machine_is_efikasb() || (machine_is_efikamx() && (get_efika_rev() < EFIKAMX_BOARD_REV_12))) { - /* SDHC1 IOMUX */ - mxc_request_iomux(MX51_PIN_SD1_CMD, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_SD1_CMD, - PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE | - PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD1_CLK, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_SD1_CLK, - PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE | - PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD1_DATA0, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA0, - PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE | - PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD1_DATA1, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA1, - PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE | - PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD1_DATA2, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA2, - PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE | - PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD1_DATA3, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA3, - PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE | - PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST); - /* SDHC2 IOMUX */ - mxc_request_iomux(MX51_PIN_SD2_CMD, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_SD2_CMD, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD2_CLK, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_SD2_CLK, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD2_DATA0, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD2_DATA0, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD2_DATA1, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD2_DATA1, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD2_DATA2, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD2_DATA2, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD2_DATA3, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD2_DATA3, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); + mx51_esdhc2_init_pins();
/* SDHC2 Control lines IOMUX */ mxc_request_iomux(MX51_PIN_GPIO1_7, @@ -436,33 +348,6 @@ int board_mmc_init(bd_t *bis) if (!ret) ret = fsl_esdhc_initialize(bis, &esdhc_cfg[1]); } else { /* New boards use only SDHC1 */ - /* SDHC1 IOMUX */ - mxc_request_iomux(MX51_PIN_SD1_CMD, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_SD1_CMD, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD1_CLK, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_SD1_CLK, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD1_DATA0, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA0, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD1_DATA1, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA1, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD1_DATA2, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA2, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD1_DATA3, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA3, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); - ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]); }
@@ -676,7 +561,7 @@ int board_early_init_f(void) { init_drive_strength();
- setup_iomux_uart(); + mx51_uart1_init_pins(); setup_iomux_spi(); setup_iomux_led();
diff --git u-boot-4d3c95f.orig/board/freescale/mx51evk/mx51evk.c u-boot-4d3c95f/board/freescale/mx51evk/mx51evk.c index 514a7ac..dedfb7e 100644 --- u-boot-4d3c95f.orig/board/freescale/mx51evk/mx51evk.c +++ u-boot-4d3c95f/board/freescale/mx51evk/mx51evk.c @@ -60,21 +60,6 @@ int dram_init(void) return 0; }
-static void setup_iomux_uart(void) -{ - unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE | - PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH; - - mxc_request_iomux(MX51_PIN_UART1_RXD, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_UART1_RXD, pad | PAD_CTL_SRE_FAST); - mxc_request_iomux(MX51_PIN_UART1_TXD, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_UART1_TXD, pad | PAD_CTL_SRE_FAST); - mxc_request_iomux(MX51_PIN_UART1_RTS, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_UART1_RTS, pad); - mxc_request_iomux(MX51_PIN_UART1_CTS, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad); -} - static void setup_iomux_fec(void) { /*FEC_MDIO*/ @@ -153,29 +138,11 @@ static void setup_iomux_fec(void) #ifdef CONFIG_MXC_SPI static void setup_iomux_spi(void) { - /* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */ - mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI, 0x105); - - /* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */ - mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO, 0x105); + mx51_ecspi1_init_pins();
/* de-select SS1 of instance: ecspi1. */ mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT3); mxc_iomux_set_pad(MX51_PIN_CSPI1_SS1, 0x85); - - /* 000: Select mux mode: ALT0 mux port: SS0 ecspi1 */ - mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0, 0x185); - - /* 000: Select mux mode: ALT0 mux port: RDY of instance: ecspi1. */ - mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x180); - - /* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */ - mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK, 0x105); } #endif
@@ -354,90 +321,10 @@ int board_mmc_init(bd_t *bis) index++) { switch (index) { case 0: - mxc_request_iomux(MX51_PIN_SD1_CMD, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD1_CLK, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD1_DATA0, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD1_DATA1, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD1_DATA2, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD1_DATA3, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_SD1_CMD, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD1_CLK, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_NONE | PAD_CTL_47K_PU | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA0, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA1, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA2, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA3, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PD | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_request_iomux(MX51_PIN_GPIO1_0, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_GPIO1_0, - PAD_CTL_HYS_ENABLE); - mxc_request_iomux(MX51_PIN_GPIO1_1, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_GPIO1_1, - PAD_CTL_HYS_ENABLE); + mx51_esdhc1_init_pins(); break; case 1: - mxc_request_iomux(MX51_PIN_SD2_CMD, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD2_CLK, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD2_DATA0, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX51_PIN_SD2_DATA1, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX51_PIN_SD2_DATA2, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX51_PIN_SD2_DATA3, - IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD2_CMD, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | - PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD2_CLK, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | - PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD2_DATA0, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | - PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD2_DATA1, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | - PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD2_DATA2, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | - PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD2_DATA3, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | - PAD_CTL_SRE_FAST); - mxc_request_iomux(MX51_PIN_SD2_CMD, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mx51_esdhc2_init_pins(); mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); mxc_iomux_set_pad(MX51_PIN_GPIO1_6, @@ -509,7 +396,7 @@ void lcd_enable(void)
int board_early_init_f(void) { - setup_iomux_uart(); + mx51_uart1_init_pins(); setup_iomux_fec(); #ifdef CONFIG_USB_EHCI_MX5 setup_usb_h1(); diff --git u-boot-4d3c95f.orig/board/ttcontrol/vision2/vision2.c u-boot-4d3c95f/board/ttcontrol/vision2/vision2.c index d68bef7..a96c475 100644 --- u-boot-4d3c95f.orig/board/ttcontrol/vision2/vision2.c +++ u-boot-4d3c95f/board/ttcontrol/vision2/vision2.c @@ -182,21 +182,7 @@ static void setup_uart(void) #ifdef CONFIG_MXC_SPI void spi_io_init(void) { - /* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */ - mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - - /* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */ - mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - - /* 000: Select mux mode: ALT0 mux port: SS0 of instance: ecspi1. */ - mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0, - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE | - PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mx51_ecspi1_init_pins();
/* * SS1 will be used as GPIO because of uninterrupted @@ -212,11 +198,6 @@ void spi_io_init(void) mxc_iomux_set_pad(MX51_PIN_DI1_PIN11, PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - - /* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */ - mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); }
static void reset_peripherals(int reset) @@ -539,56 +520,7 @@ int get_mmc_getcd(u8 *cd, struct mmc *mmc) #ifdef CONFIG_FSL_ESDHC int board_mmc_init(bd_t *bis) { - mxc_request_iomux(MX51_PIN_SD1_CMD, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD1_CLK, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD1_DATA0, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD1_DATA1, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD1_DATA2, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD1_DATA3, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_SD1_CMD, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD1_CLK, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_NONE | PAD_CTL_47K_PU | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA0, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA1, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA2, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA3, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PD | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_request_iomux(MX51_PIN_GPIO1_0, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_GPIO1_0, - PAD_CTL_HYS_ENABLE); - mxc_request_iomux(MX51_PIN_GPIO1_1, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_GPIO1_1, - PAD_CTL_HYS_ENABLE); + mx51_esdhc1_init_pins();
return fsl_esdhc_initialize(bis, &esdhc_cfg[0]); }