HI Kang,
On 26 February 2010 08:12, Minkyu Kang promsoft@gmail.com wrote:
Dear Naveen Krishna CH,
On 25 February 2010 21:28, ch.naveen@samsung.com wrote:
From: Naveen Krishna CH ch.naveen@samsung.com
Add setup for ethernet on SMDKC100, allowing kernel/ramdisk to be loaded over tftp.
The preinit function will configure GPIO (GPK0CON) & SROMC to look for environment in SROM Bank 3.
Signed-off-by: Naveen Krishna Ch ch.naveen@samsung.com
Changes since V1:
- The CONFIG_BOOTP* and Net config Macros are removed from config
header.
Comments from Ben Warren are fixed 2. The GPIO configuration is modified & Macro and Function are renamed. Comments from Minkyu Kang are fixedChanges since V2
Changes since V2:
- GPIO configurations function has been implemented.
Changes since V3:
- Comments from Minkyu Kang are fixed.
Changes since V4: None
board/samsung/smdkc100/smdkc100.c | 39
+++++++++++++++++++++++++++++++++++++
include/configs/smdkc100.h | 12 ++++++++++- 2 files changed, 50 insertions(+), 1 deletions(-)
Patch have compiler warnings.
smdkc100.c: In function 'smc9115_pre_init': smdkc100.c:37: warning: unused variable 'tmp' smdkc100.c: In function 'board_eth_init': smdkc100.c:87: warning: implicit declaration of function 'smc911x_initialize'
please fix it.
I fixed the warning, I wil wait till the end of the day and send the v6 patch set.
diff --git a/board/samsung/smdkc100/smdkc100.c
b/board/samsung/smdkc100/smdkc100.c
index 15a1a27..4fc802e 100644 --- a/board/samsung/smdkc100/smdkc100.c +++ b/board/samsung/smdkc100/smdkc100.c @@ -23,10 +23,40 @@ */
#include <common.h> +#include <asm/io.h> +#include <asm/arch/smc.h> +#include <asm/arch/gpio.h>
DECLARE_GLOBAL_DATA_PTR;
+/*
- Miscellaneous platform dependent initialisations
- */
+static void smc9115_pre_init(void) +{
u32 tmp;remove it.
u32 smc_bw_conf, smc_bc_conf;struct s5pc100_gpio *const gpio =(struct s5pc100_gpio *)S5PC100_GPIO_BASE;/* gpio configuration GPK0CON */gpio_cfg_pin(&gpio->gpio_k0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2));/* Ethernet needs bus width of 16 bits */smc_bw_conf = SMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK);smc_bc_conf = SMC_BC_TACS(0x0) | SMC_BC_TCOS(0x4) |SMC_BC_TACC(0xe)
| SMC_BC_TCOH(0x1) | SMC_BC_TAH(0x4)| SMC_BC_TACP(0x6) | SMC_BC_PMC(0x0);/* Select and configure the SROMC bank */s5pc1xx_config_sromc(CONFIG_ENV_SROM_BANK, smc_bw_conf,smc_bc_conf);
+}
int board_init(void) {
smc9115_pre_init();gd->bd->bi_arch_number = MACH_TYPE_SMDKC100; gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;@@ -49,3 +79,12 @@ int checkboard(void) return 0; } #endif
+int board_eth_init(bd_t *bis) +{
int rc = 0;+#ifdef CONFIG_SMC911X
rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);need netdev.h
Thanks for ur comments and help.
+#endif
return rc;+} diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index f12fea3..c8abad6 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -83,7 +83,6 @@ #undef CONFIG_CMD_FLASH #undef CONFIG_CMD_IMLS #undef CONFIG_CMD_NAND -#undef CONFIG_CMD_NET
#define CONFIG_CMD_CACHE #define CONFIG_CMD_REGINFO @@ -235,4 +234,15 @@
#define CONFIG_DOS_PARTITION 1
+/*
- Ethernet Contoller driver
- */
+#ifdef CONFIG_CMD_NET +#define CONFIG_NET_MULTI +#define CONFIG_SMC911X 1 /* we have a SMC9115 on-board
*/
+#define CONFIG_SMC911X_16_BIT 1 /* SMC911X_16_BIT Mode
*/
+#define CONFIG_SMC911X_BASE 0x98800300 /* SMC911X Drive Base
*/
+#define CONFIG_ENV_SROM_BANK 3 /* Select SROM Bank-3 for
Ethernet*/
+#endif /* CONFIG_CMD_NET */
#endif /* __CONFIG_H */
1.6.6
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Thanks Minkyu Kang -- from. prom. www.promsoft.net _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot