Hi Jagan,
On 19/09/2017 20:37, Jagan Teki wrote:
From: Jagan Teki jagan@amarulasolutions.com
This series add OF_CONTROL support for SPL on Engicam i.MX6QDL boards, along with proper code optimzation changes.
Jagan Teki (6): i.MX6: engicam: Fix MAINTAINERS/README imx6ul: geam6ul/isiot: Fix to MMC devices i.MX6: engicam: Move set_fdt_file to common i.MX6Q: icorem6: Move spl load fit to common/spl i.MX6Q: icore: Add SPL_OF_CONTROL support i.MX6Q: icore: Add imx6q board for icore/icore_rqs
arch/arm/dts/imx6qdl-icore-rqs.dtsi | 2 + arch/arm/dts/imx6qdl-icore.dtsi | 2 + arch/arm/dts/imx6qdl.dtsi | 5 + arch/arm/mach-imx/mx6/Kconfig | 24 +-- board/engicam/common/board.c | 24 +++ board/engicam/common/board.h | 1 - board/engicam/common/spl.c | 16 ++ board/engicam/geam6ul/MAINTAINERS | 2 +- board/engicam/geam6ul/geam6ul.c | 6 - board/engicam/icorem6/README | 33 ---- board/engicam/icorem6_rqs/Kconfig | 12 -- board/engicam/icorem6_rqs/MAINTAINERS | 9 -- board/engicam/icorem6_rqs/Makefile | 6 - board/engicam/icorem6_rqs/icorem6_rqs.c | 171 --------------------- board/engicam/{icorem6 => imx6q}/Kconfig | 2 +- board/engicam/{icorem6 => imx6q}/MAINTAINERS | 10 +- board/engicam/{icorem6 => imx6q}/Makefile | 2 +- board/engicam/{icorem6_rqs => imx6q}/README | 12 +- board/engicam/{icorem6/icorem6.c => imx6q/imx6q.c} | 108 +++---------- board/engicam/isiotmx6ul/MAINTAINERS | 2 +- board/engicam/isiotmx6ul/isiotmx6ul.c | 11 -- configs/imx6qdl_icore_mmc_defconfig | 1 + configs/imx6qdl_icore_rqs_defconfig | 3 +- configs/imx6ul_geam_mmc_defconfig | 1 - configs/imx6ul_isiot_emmc_defconfig | 1 - configs/imx6ul_isiot_mmc_defconfig | 1 - include/configs/imx6-engicam.h | 22 +-- 27 files changed, 112 insertions(+), 377 deletions(-) delete mode 100644 board/engicam/icorem6/README delete mode 100644 board/engicam/icorem6_rqs/Kconfig delete mode 100644 board/engicam/icorem6_rqs/MAINTAINERS delete mode 100644 board/engicam/icorem6_rqs/Makefile delete mode 100644 board/engicam/icorem6_rqs/icorem6_rqs.c rename board/engicam/{icorem6 => imx6q}/Kconfig (87%) rename board/engicam/{icorem6 => imx6q}/MAINTAINERS (51%) rename board/engicam/{icorem6 => imx6q}/Makefile (80%) rename board/engicam/{icorem6_rqs => imx6q}/README (68%) rename board/engicam/{icorem6/icorem6.c => imx6q/imx6q.c} (73%)
I cannot build your boards when I apply the patchset (CONFIG_SYS_FSL_ESDHC_ADDR is away now):
Building current source for 8 boards (8 threads, 1 job per thread) arm: + imx6ul_isiot_emmc +drivers/mmc/fsl_esdhc.c: In function 'fsl_esdhc_mmc_init': +drivers/mmc/fsl_esdhc.c:934:20: error: 'CONFIG_SYS_FSL_ESDHC_ADDR' undeclared (first use in this function) + cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR; + ^ +drivers/mmc/fsl_esdhc.c:934:20: note: each undeclared identifier is reported only once for each function it appears in +make[4]: *** [spl/drivers/mmc/fsl_esdhc.o] Error 1 +make[3]: *** [spl/drivers/mmc] Error 2 +make[2]: *** [spl/drivers] Error 2 +make[1]: *** [spl/u-boot-spl] Error 2 +make: *** [sub-make] Error 2 arm: + imx6ul_geam_mmc +drivers/mmc/fsl_esdhc.c: In function 'fsl_esdhc_mmc_init': +drivers/mmc/fsl_esdhc.c:934:20: error: 'CONFIG_SYS_FSL_ESDHC_ADDR' undeclared (first use in this function) + cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR; + ^ +drivers/mmc/fsl_esdhc.c:934:20: note: each undeclared identifier is reported only once for each function it appears in +make[4]: *** [spl/drivers/mmc/fsl_esdhc.o] Error 1 +make[3]: *** [spl/drivers/mmc] Error 2 +make[2]: *** [spl/drivers] Error 2 +make[1]: *** [spl/u-boot-spl] Error 2 +make: *** [sub-make] Error 2 arm: + imx6ul_isiot_mmc +drivers/mmc/fsl_esdhc.c: In function 'fsl_esdhc_mmc_init': +drivers/mmc/fsl_esdhc.c:934:20: error: 'CONFIG_SYS_FSL_ESDHC_ADDR' undeclared (first use in this function) + cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR;
Could you take a look, please ?
Thanks, Stefano