From: Cyrille Pitchen cyrille.pitchen@atmel.com
This is a transitional patch to prepare the SPI FLASH sub-system to support the 4-byte address instruction set later. For now, flash->addr_len is always set to SPI_FLASH_3B_ADDR_LEN.
Signed-off-by: Cyrille Pitchen cyrille.pitchen@atmel.com Signed-off-by: Wenyou Yang wenyou.yang@microchip.com ---
Changes in v3: None Changes in v2: None
drivers/mtd/spi/spi_flash.c | 13 ++++++++----- include/spi_flash.h | 2 ++ 2 files changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 8712e5eef0..d6942d57b2 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -322,7 +322,7 @@ int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len) } }
- spi_flash_command_init(&cmd, flash->erase_cmd, SPI_FLASH_3B_ADDR_LEN, + spi_flash_command_init(&cmd, flash->erase_cmd, flash->addr_len, SPI_FCMD_ERASE); while (len) { erase_addr = offset; @@ -377,7 +377,7 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset, } }
- spi_flash_command_init(&cmd, flash->write_cmd, SPI_FLASH_3B_ADDR_LEN, + spi_flash_command_init(&cmd, flash->write_cmd, flash->addr_len, SPI_FCMD_WRITE); cmd.proto = flash->write_proto; for (actual = 0; actual < len; actual += chunk_len) { @@ -481,7 +481,7 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, return 0; }
- spi_flash_command_init(&cmd, flash->read_cmd, SPI_FLASH_3B_ADDR_LEN, + spi_flash_command_init(&cmd, flash->read_cmd, flash->addr_len, SPI_FCMD_READ); cmd.proto = flash->read_proto; cmd.num_wait_states = flash->dummy_byte * 8; @@ -529,7 +529,7 @@ static int sst_byte_write(struct spi_flash *flash, u32 offset, const void *buf) int ret; u8 sr = 0xFFu;
- spi_flash_command_init(&cmd, CMD_SST_BP, SPI_FLASH_3B_ADDR_LEN, + spi_flash_command_init(&cmd, CMD_SST_BP, flash->addr_len, SPI_FCMD_WRITE); cmd.addr = offset; cmd.data_len = 1; @@ -580,7 +580,7 @@ int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len, if (ret) goto done;
- spi_flash_command_init(&cmd, CMD_SST_AAI_WP, SPI_FLASH_3B_ADDR_LEN, + spi_flash_command_init(&cmd, CMD_SST_AAI_WP, flash->addr_len, SPI_FCMD_WRITE); cmd.addr = offset; cmd.data_len = 2; @@ -1102,6 +1102,9 @@ int spi_flash_scan(struct spi_flash *flash) flash->flags |= SNOR_F_USE_FSR; #endif
+ /* Set the address length */ + flash->addr_len = SPI_FLASH_3B_ADDR_LEN; + /* Configure the BAR - discover bank cmds and read current bank */ #ifdef CONFIG_SPI_FLASH_BAR ret = read_bar(flash, info); diff --git a/include/spi_flash.h b/include/spi_flash.h index 688a1708fd..09a81fdd76 100644 --- a/include/spi_flash.h +++ b/include/spi_flash.h @@ -45,6 +45,7 @@ struct spi_slave; * @bank_read_cmd: Bank read cmd * @bank_write_cmd: Bank write cmd * @bank_curr: Current flash bank + * @addr_len: Number of bytes for the address * @erase_cmd: Erase cmd 4K, 32K, 64K * @read_cmd: Read cmd - Array Fast, Extn read and quad read. * @write_cmd: Write cmd - page and quad program. @@ -82,6 +83,7 @@ struct spi_flash { u8 bank_write_cmd; u8 bank_curr; #endif + u8 addr_len; u8 erase_cmd; u8 read_cmd; u8 write_cmd;