To reduce the complexity of the Makefile, let the generator tell what its dependencies are. For this purpose use the "--deps" option.
Signed-off-by: Jean-Jacques Hiblot jjhiblot@ti.com ---
Changes in v3: None Changes in v2: None
Makefile | 9 ++------- arch/arm/mach-imx/mkimage_fit_atf.sh | 7 +++++++ arch/arm/mach-rockchip/make_fit_atf.py | 8 ++++++++ board/sunxi/mksunxi_fit_atf.sh | 5 +++++ 4 files changed, 22 insertions(+), 7 deletions(-)
diff --git a/Makefile b/Makefile index 048d12340b..3f8899b91b 100644 --- a/Makefile +++ b/Makefile @@ -1211,13 +1211,8 @@ U_BOOT_ITS = $(src)/$(SPL_FIT_SOURCE) else ifneq ($(SPL_FIT_GENERATOR),) U_BOOT_ITS := u-boot.its -ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-imx/mkimage_fit_atf.sh") -U_BOOT_ITS_DEPS += u-boot-nodtb.bin -endif -ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py") -U_BOOT_ITS_DEPS += u-boot -endif -$(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE +U_BOOT_ITS_DEPS += $(shell $(srctree)/$(SPL_FIT_GENERATOR) --deps $(BOARD)) +$(U_BOOT_ITS): u-boot-nodtb.bin $(U_BOOT_ITS_DEPS) FORCE $(srctree)/$(SPL_FIT_GENERATOR) $(BOARD) \ $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@ endif diff --git a/arch/arm/mach-imx/mkimage_fit_atf.sh b/arch/arm/mach-imx/mkimage_fit_atf.sh index 45b325665e..45a81fbad3 100755 --- a/arch/arm/mach-imx/mkimage_fit_atf.sh +++ b/arch/arm/mach-imx/mkimage_fit_atf.sh @@ -11,6 +11,13 @@ [ -z "$ATF_LOAD_ADDR" ] && ATF_LOAD_ADDR="0x00910000" [ -z "$BL33_LOAD_ADDR" ] && BL33_LOAD_ADDR="0x40200000"
+if [ x"$1" = x"--deps" ]; then + echo $BL31 + echo "tee.bin" + echo "u-boot-nodtb.bin" + exit 0 +fi + if [ ! -f $BL31 ]; then echo "ERROR: BL31 file $BL31 NOT found" >&2 exit 0 diff --git a/arch/arm/mach-rockchip/make_fit_atf.py b/arch/arm/mach-rockchip/make_fit_atf.py index 4138b04a37..afd734e736 100755 --- a/arch/arm/mach-rockchip/make_fit_atf.py +++ b/arch/arm/mach-rockchip/make_fit_atf.py @@ -192,11 +192,19 @@ def get_bl31_segments_info(bl31_file_name): paddr = seg[ELF_SEG_P_PADDR] print('paddr: %08x' % paddr)
+def show_deps_and_exit(): + print("u-boot") + print("bl31.elf") + sys.exit(0) + def main(): uboot_elf="./u-boot" bl31_elf="./bl31.elf" FIT_ITS=sys.stdout
+ if sys.argv[1] == "--deps": + show_deps_and_exit() + opts, args = getopt.getopt(sys.argv[1:], "o:u:b:h") for opt, val in opts: if opt == "-o": diff --git a/board/sunxi/mksunxi_fit_atf.sh b/board/sunxi/mksunxi_fit_atf.sh index 0dc7ab4348..8f87514a6f 100755 --- a/board/sunxi/mksunxi_fit_atf.sh +++ b/board/sunxi/mksunxi_fit_atf.sh @@ -5,6 +5,11 @@ # # usage: $0 <dt_name> [<dt_name> [<dt_name] ...]
+if [ x"$1" = x"--deps" ]; then + echo "u-boot-nodtb.bin" + exit 0 +fi + [ -z "$BL31" ] && BL31="bl31.bin"
if [ ! -f $BL31 ]; then