On Tue, 2017-01-24 at 21:31 -0600, Dinh Nguyen wrote:
On 01/24/2017 11:05 AM, Dalon Westergreen wrote:
From: Dalon Westergreen dalon.westergreen@intel.com
Move repeated environment settings for socfpga boards to a common header.
The default values for the boot partition and the OS filesystem partition have changed and as as result the default uboot environment for socfpga boards needs updating.
Move to using CONFIG_DEFAULT_DEVICE_TREE for setting the default linux devicetree used during linux boot.
Signed-off-by: Dalon Westergreen dalon.westergreen@intel.com
include/configs/socfpga_common.h | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 6285266..bdd6e2f 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -336,5 +336,32 @@ unsigned int cm_get_qspi_controller_clk_hz(void); * Stack setup */ #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
+/* Extra Environment */ +#ifndef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \
- "verify=n\0" \
- "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
- "bootimage=" CONFIG_BOOTFILE "\0" \
- "fdt_addr=100\0" \
- "fdtimage=" CONFIG_DEFAULT_FDT_FILE "\0" \
- "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
"bootm ${loadaddr} - ${fdt_addr}\0" \- "mmcroot=/dev/mmcblk0p3\0" \
Should this be mmcblk0p2?
that was the point of the patches, p1 is now the a2 partition, so the fat and root partition shifted up by 1.
Dinh