6 May
2012
6 May
'12
7:19 p.m.
On 19/04/2012 10:55, Timo Ketola wrote:
The USB controller in i.MX25 has a PORTSCx registers which should be set. In this regard it is similar to the controller in i.MX31. As this file is compiled only with i.MX25 and -31, #ifdef check can be removed.
Signed-off-by: Timo Ketola timo@exertus.fi
Changes in v4:
- Reworded subject to shorten it
- Added commit message
- Changed the fix from adding i.MX25 to removing the check altogether
Changes in v2:
- Dropped patches 2, 3 and 6 so this one changed from 8 to 5
- Rebased to u-boot-imx next
drivers/usb/host/ehci-mxc.c | 2 -- 1 files changed, 0 insertions(+), 2 deletions(-)
Applied to u-boot-imx, thanks.
Best regards, Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================