On 23/07/20 3:20 pm, Faiz Abbas wrote:
Hi Lokesh,
Hi Lokesh,
On 23/07/20 2:17 pm, Lokesh Vutla wrote:
Add the basic r5 and a72 basic dts for j7200. Following nodes were supported:
- UART
- MMC SD
- I2C
- TISCI communication
Signed-off-by: Lokesh Vutla lokeshvutla@ti.com Signed-off-by: Vignesh Raghavendra vigneshr@ti.com Signed-off-by: Vishal Mahaveer vishalm@ti.com Signed-off-by: Faiz Abbas faiz_abbas@ti.com
arch/arm/dts/Makefile | 4 +- .../k3-j7200-common-proc-board-u-boot.dtsi | 92 +++++ arch/arm/dts/k3-j7200-common-proc-board.dts | 94 ++++++ arch/arm/dts/k3-j7200-main.dtsi | 313 ++++++++++++++++++ arch/arm/dts/k3-j7200-mcu-wakeup.dtsi | 117 +++++++ .../arm/dts/k3-j7200-r5-common-proc-board.dts | 191 +++++++++++ arch/arm/dts/k3-j7200-som-p0.dtsi | 29 ++ arch/arm/dts/k3-j7200.dtsi | 175 ++++++++++ 8 files changed, 1014 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi create mode 100644 arch/arm/dts/k3-j7200-common-proc-board.dts create mode 100644 arch/arm/dts/k3-j7200-main.dtsi create mode 100644 arch/arm/dts/k3-j7200-mcu-wakeup.dtsi create mode 100644 arch/arm/dts/k3-j7200-r5-common-proc-board.dts create mode 100644 arch/arm/dts/k3-j7200-som-p0.dtsi create mode 100644 arch/arm/dts/k3-j7200.dtsi
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index cee10f533f..cdca20206f 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -938,7 +938,9 @@ dtb-$(CONFIG_STM32MP15x) += \
...
- main_sdhci0: sdhci@4f8000 {
/s/4f8000/4f80000
Good catch. Will fix in v2.
compatible = "ti,j7200-sdhci-8bit";Replace with compatible = "ti,j7200-sdhci-8bit", ti,j721e-sdhci-8bit";
No point adding just the j7200 compatible. Will use j721e for now and please update it as in when needed.
Thanks and regards, Lokesh