For i.MX6, the bootmode determine code is part of spl_boot_device, but there is might be a possibility for other part the code need to check the desired boot mode for adding new functionalities like modeboot env variable, or changing boot order etc.
So introduced imx6_src_get_boot_mode which actually reading the boot mode register for desired modes.
More cleanup will be add in future patches.
Cc: Stefano Babic sbabic@denx.de Cc: Tim Harvey tharvey@gateworks.com Cc: Matteo Lisi matteo.lisi@engicam.com Cc: Michael Trimarchi michael@amarulasolutions.com Signed-off-by: Jagan Teki jagan@openedev.com --- arch/arm/imx-common/init.c | 12 ++++++++++++ arch/arm/imx-common/spl.c | 6 +++--- arch/arm/include/asm/imx-common/sys_proto.h | 14 ++++++++++++++ 3 files changed, 29 insertions(+), 3 deletions(-)
diff --git a/arch/arm/imx-common/init.c b/arch/arm/imx-common/init.c index e5dbd93..036ebb2 100644 --- a/arch/arm/imx-common/init.c +++ b/arch/arm/imx-common/init.c @@ -115,3 +115,15 @@ void boot_mode_apply(unsigned cfg_val) writel(reg, &psrc->gpr10); } #endif + +#if defined(CONFIG_MX6) +u32 imx6_src_get_boot_mode(void) +{ + struct src *psrc = (struct src *)SRC_BASE_ADDR; + + if (imx6_is_bmode_from_gpr9()) + return readl(&psrc->gpr9); + else + return readl(&psrc->sbmr1); +} +#endif diff --git a/arch/arm/imx-common/spl.c b/arch/arm/imx-common/spl.c index 60c4adf..a7f9705 100644 --- a/arch/arm/imx-common/spl.c +++ b/arch/arm/imx-common/spl.c @@ -10,6 +10,7 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> #include <asm/spl.h> #include <spl.h> #include <asm/imx-common/hab.h> @@ -19,16 +20,15 @@ u32 spl_boot_device(void) { struct src *psrc = (struct src *)SRC_BASE_ADDR; - unsigned int gpr10_boot = readl(&psrc->gpr10) & (1 << 28); - unsigned reg = gpr10_boot ? readl(&psrc->gpr9) : readl(&psrc->sbmr1); unsigned int bmode = readl(&psrc->sbmr2); + u32 reg = imx6_src_get_boot_mode();
/* * Check for BMODE if serial downloader is enabled * BOOT_MODE - see IMX6DQRM Table 8-1 */ if ((((bmode >> 24) & 0x03) == 0x01) || /* Serial Downloader */ - (gpr10_boot && (reg == 1))) + (imx6_is_bmode_from_gpr9() && (reg == 1))) return BOOT_DEVICE_UART; /* BOOT_CFG1[7:4] - see IMX6DQRM Table 8-8 */ switch ((reg & 0x000000FF) >> 4) { diff --git a/arch/arm/include/asm/imx-common/sys_proto.h b/arch/arm/include/asm/imx-common/sys_proto.h index 539d34b..99e3869 100644 --- a/arch/arm/include/asm/imx-common/sys_proto.h +++ b/arch/arm/include/asm/imx-common/sys_proto.h @@ -8,6 +8,7 @@ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_
+#include <asm/io.h> #include <asm/imx-common/regs-common.h> #include <common.h> #include "../arch-imx/cpu.h" @@ -38,6 +39,19 @@ #define is_mx6ull() (is_cpu_type(MXC_CPU_MX6ULL)) #define is_mx6sll() (is_cpu_type(MXC_CPU_MX6SLL))
+#ifdef CONFIG_MX6 +#define IMX6_SRC_GPR10_BMODE BIT(28) + +static inline u8 imx6_is_bmode_from_gpr9(void) +{ + struct src *psrc = (struct src *)SRC_BASE_ADDR; + + return readl(&psrc->gpr10) & IMX6_SRC_GPR10_BMODE; +} + +u32 imx6_src_get_boot_mode(void); +#endif /* CONFIG_MX6 */ + u32 get_nr_cpus(void); u32 get_cpu_rev(void); u32 get_cpu_speed_grade_hz(void);