From: Igor Opaniuk igor.opaniuk@toradex.com
Move code for writing FCB/DBBT pages to a separate function
Signed-off-by: Igor Opaniuk igor.opaniuk@toradex.com ---
arch/arm/mach-imx/cmd_nandbcb.c | 221 ++++++++++++++++++-------------- 1 file changed, 122 insertions(+), 99 deletions(-)
diff --git a/arch/arm/mach-imx/cmd_nandbcb.c b/arch/arm/mach-imx/cmd_nandbcb.c index b7f651568f..72d8a5be28 100644 --- a/arch/arm/mach-imx/cmd_nandbcb.c +++ b/arch/arm/mach-imx/cmd_nandbcb.c @@ -64,7 +64,8 @@ static u32 calc_chksum(void *buf, size_t size) return ~chksum; }
-static void fill_fcb(struct fcb_block *fcb, struct mtd_info *mtd) +static void fill_fcb(struct fcb_block *fcb, struct mtd_info *mtd, + u32 fw1_start, u32 fw2_start, u32 fw_pages) { struct nand_chip *chip = mtd_to_nand(mtd); struct mxs_nand_info *nand_info = nand_get_controller_data(chip); @@ -112,6 +113,11 @@ static void fill_fcb(struct fcb_block *fcb, struct mtd_info *mtd) fcb->disbbm = 0; fcb->disbbm_search = 0;
+ fcb->fw1_start = fw1_start; /* Firmware image starts on this sector */ + fcb->fw2_start = fw2_start; /* Secondary FW Image starting Sector */ + fcb->fw1_pages = fw_pages; /* Number of sectors in firmware image */ + fcb->fw2_pages = fw_pages; /* Number of sector in secondary FW image */ + fcb->checksum = calc_chksum((void *)fcb + 4, sizeof(*fcb) - 4); }
@@ -135,6 +141,109 @@ static int dbbt_fill_data(struct mtd_info *mtd, void *buf, int num_blocks) return n_bad_blocks; }
+static int write_fcb_dbbt(struct mtd_info *mtd, struct fcb_block *fcb, + struct dbbt_block *dbbt, void *dbbt_data_page, + loff_t off) +{ + void *fcb_raw_page = 0; + int i, ret; + size_t dummy; + + /* + * We prepare raw page only for i.MX6, for i.MX7 we + * leverage BCH hw module instead + */ + if (is_mx6()) { + /* write fcb/dbbt */ + fcb_raw_page = kzalloc(mtd->writesize + mtd->oobsize, + GFP_KERNEL); + if (!fcb_raw_page) { + debug("failed to allocate fcb_raw_page\n"); + ret = -ENOMEM; + return ret; + } + + memcpy(fcb_raw_page + 12, fcb, sizeof(struct fcb_block)); + encode_hamming_13_8(fcb_raw_page + 12, fcb_raw_page + + 12 + 512, 512); + /* + * Set the first and second byte of OOB data to 0xFF, + * not 0x00. These bytes are used as the Manufacturers Bad + * Block Marker (MBBM). Since the FCB is mostly written to + * the first page in a block, a scan for + * factory bad blocks will detect these blocks as bad, e.g. + * when function nand_scan_bbt() is executed to build a new + * bad block table. + */ + memset(fcb_raw_page + mtd->writesize, 0xFF, 2); + } + for (i = 0; i < 2; i++) { + if (mtd_block_isbad(mtd, off)) { + printf("Block %d is bad, skipped\n", i); + continue; + } + + /* + * User BCH ECC hardware module for i.MX7 + */ + if (is_mx7()) { + u32 off = i * mtd->erasesize; + size_t rwsize = sizeof(*fcb); + + printf("Writing %d bytes to 0x%x: ", rwsize, off); + + /* switch nand BCH to FCB compatible settings */ + mxs_nand_mode_fcb(mtd); + ret = nand_write(mtd, off, &rwsize, + (unsigned char *)fcb); + mxs_nand_mode_normal(mtd); + + printf("%s\n", ret ? "ERROR" : "OK"); + } else if (is_mx6()) { + /* raw write */ + mtd_oob_ops_t ops = { + .datbuf = (u8 *)fcb_raw_page, + .oobbuf = ((u8 *)fcb_raw_page) + + mtd->writesize, + .len = mtd->writesize, + .ooblen = mtd->oobsize, + .mode = MTD_OPS_RAW + }; + + ret = mtd_write_oob(mtd, mtd->erasesize * i, &ops); + if (ret) + goto fcb_raw_page_err; + debug("NAND fcb write: 0x%x offset 0x%x written: %s\n", + mtd->erasesize * i, ops.len, ret ? + "ERROR" : "OK"); + } + + ret = mtd_write(mtd, mtd->erasesize * i + mtd->writesize, + mtd->writesize, &dummy, (void *)dbbt); + if (ret) + goto fcb_raw_page_err; + debug("NAND dbbt write: 0x%x offset, 0x%x bytes written: %s\n", + mtd->erasesize * i + mtd->writesize, dummy, + ret ? "ERROR" : "OK"); + + /* dbbtpages == 0 if no bad blocks */ + if (dbbt->dbbtpages > 0) { + loff_t to = (mtd->erasesize * i + mtd->writesize * 5); + + ret = mtd_write(mtd, to, mtd->writesize, &dummy, + dbbt_data_page); + if (ret) + goto fcb_raw_page_err; + } + } + +fcb_raw_page_err: + if (is_mx6()) + kfree(fcb_raw_page); + + return ret; +} + static int nandbcb_update(struct mtd_info *mtd, loff_t off, size_t size, size_t maxsize, const u_char *buf) { @@ -142,12 +251,12 @@ static int nandbcb_update(struct mtd_info *mtd, loff_t off, size_t size, struct fcb_block *fcb; struct dbbt_block *dbbt; loff_t fw1_off; - void *fwbuf, *fcb_raw_page, *dbbt_page, *dbbt_data_page; + void *fwbuf, *dbbt_page, *dbbt_data_page; + u32 fw1_start, fw1_pages; int nr_blks, nr_blks_fcb, fw1_blk; - size_t fwsize, dummy; - int i, ret; + size_t fwsize; + int ret;
- fcb_raw_page = 0; /* erase */ memset(&opts, 0, sizeof(opts)); opts.offset = off; @@ -209,9 +318,9 @@ static int nandbcb_update(struct mtd_info *mtd, loff_t off, size_t size, goto fwbuf_err; }
- fcb->fw1_start = (fw1_blk * mtd->erasesize) / mtd->writesize; - fcb->fw1_pages = size / mtd->writesize + 1; - fill_fcb(fcb, mtd); + fw1_start = (fw1_blk * mtd->erasesize) / mtd->writesize; + fw1_pages = size / mtd->writesize + 1; + fill_fcb(fcb, mtd, fw1_start, 0, fw1_pages);
/* fill dbbt */ dbbt_page = kzalloc(mtd->writesize, GFP_KERNEL); @@ -238,97 +347,11 @@ static int nandbcb_update(struct mtd_info *mtd, loff_t off, size_t size, else if (ret > 0) dbbt->dbbtpages = 1;
- /* - * We prepare raw page only for i.MX6, for i.MX7 we - * leverage BCH hw module instead - */ - if (is_mx6()) { - /* write fcb/dbbt */ - fcb_raw_page = kzalloc(mtd->writesize + mtd->oobsize, - GFP_KERNEL); - if (!fcb_raw_page) { - debug("failed to allocate fcb_raw_page\n"); - ret = -ENOMEM; - goto dbbt_data_page_err; - } - - memcpy(fcb_raw_page + 12, fcb, sizeof(struct fcb_block)); - encode_hamming_13_8(fcb_raw_page + 12, fcb_raw_page + - 12 + 512, 512); - /* - * Set the first and second byte of OOB data to 0xFF, - * not 0x00. These bytes are used as the Manufacturers Bad - * Block Marker (MBBM). Since the FCB is mostly written to - * the first page in a block, a scan for - * factory bad blocks will detect these blocks as bad, e.g. - * when function nand_scan_bbt() is executed to build a new - * bad block table. - */ - memset(fcb_raw_page + mtd->writesize, 0xFF, 2); - } - for (i = 0; i < nr_blks_fcb; i++) { - if (mtd_block_isbad(mtd, off)) { - printf("Block %d is bad, skipped\n", i); - continue; - } - - /* - * User BCH ECC hardware module for i.MX7 - */ - if (is_mx7()) { - u32 off = i * mtd->erasesize; - size_t rwsize = sizeof(*fcb); - - printf("Writing %d bytes to 0x%x: ", rwsize, off); - - /* switch nand BCH to FCB compatible settings */ - mxs_nand_mode_fcb(mtd); - ret = nand_write(mtd, off, &rwsize, - (unsigned char *)fcb); - mxs_nand_mode_normal(mtd); - - printf("%s\n", ret ? "ERROR" : "OK"); - } else if (is_mx6()) { - /* raw write */ - mtd_oob_ops_t ops = { - .datbuf = (u8 *)fcb_raw_page, - .oobbuf = ((u8 *)fcb_raw_page) + - mtd->writesize, - .len = mtd->writesize, - .ooblen = mtd->oobsize, - .mode = MTD_OPS_RAW - }; - - ret = mtd_write_oob(mtd, mtd->erasesize * i, &ops); - if (ret) - goto fcb_raw_page_err; - debug("NAND fcb write: 0x%x offset 0x%x written: %s\n", - mtd->erasesize * i, ops.len, ret ? - "ERROR" : "OK"); - } - - ret = mtd_write(mtd, mtd->erasesize * i + mtd->writesize, - mtd->writesize, &dummy, dbbt_page); - if (ret) - goto fcb_raw_page_err; - debug("NAND dbbt write: 0x%x offset, 0x%x bytes written: %s\n", - mtd->erasesize * i + mtd->writesize, dummy, - ret ? "ERROR" : "OK"); - - /* dbbtpages == 0 if no bad blocks */ - if (dbbt->dbbtpages > 0) { - loff_t to = (mtd->erasesize * i + mtd->writesize * 5); - - ret = mtd_write(mtd, to, mtd->writesize, &dummy, - dbbt_data_page); - if (ret) - goto fcb_raw_page_err; - } - } + /* write fcb and dbbt to nand */ + ret = write_fcb_dbbt(mtd, fcb, dbbt, dbbt_data_page, off); + if (ret < 0) + printf("failed to write FCB/DBBT\n");
-fcb_raw_page_err: - if (is_mx6()) - kfree(fcb_raw_page); dbbt_data_page_err: kfree(dbbt_data_page); dbbt_page_err: @@ -355,7 +378,7 @@ static int do_nandbcb_update(int argc, char * const argv[])
dev = nand_curr_device; if (dev < 0) { - printf("failed to get nand_curr_device, run nand device"); + printf("failed to get nand_curr_device, run nand device\n"); return CMD_RET_FAILURE; }