From: Fabio Estevam fabio.estevam@freescale.com
No need to use multi-line style comments for single-line contents.
Signed-off-by: Fabio Estevam fabio.estevam@freescale.com --- include/configs/mx28evk.h | 60 ++++++++++++--------------------------------- 1 file changed, 15 insertions(+), 45 deletions(-)
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index dd0ef21..300bce9 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -19,9 +19,7 @@ #ifndef __MX28EVK_CONFIG_H__ #define __MX28EVK_CONFIG_H__
-/* - * SoC configurations - */ +/* SoC configurations */ #define CONFIG_MX28 /* i.MX28 SoC */
#define CONFIG_MXS_GPIO /* GPIO control */ @@ -35,9 +33,7 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_ARCH_MISC_INIT
-/* - * SPL - */ +/* SPL */ #define CONFIG_SPL #define CONFIG_SPL_NO_CPU_SUPPORT_CODE #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs" @@ -46,9 +42,7 @@ #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT
-/* - * U-Boot Commands - */ +/* U-Boot Commands */ #include <config_cmd_default.h> #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DOS_PARTITION @@ -70,9 +64,7 @@ #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_I2C
-/* - * Memory configurations - */ +/* Memory configurations */ #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ #define PHYS_SDRAM_1 0x40000000 /* Base address */ #define PHYS_SDRAM_1_SIZE 0x40000000 /* Max 1 GB RAM */ @@ -98,9 +90,7 @@ #define CONFIG_SYS_TEXT_BASE 0x40000100
#define CONFIG_ENV_OVERWRITE -/* - * U-Boot general configurations - */ +/* U-Boot general configurations */ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PROMPT "MX28EVK U-Boot > " #define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ @@ -115,23 +105,17 @@ #define CONFIG_CMDLINE_EDITING /* Command history etc */ #define CONFIG_SYS_HUSH_PARSER
-/* - * Serial Driver - */ +/* Serial Driver */ #define CONFIG_PL011_SERIAL #define CONFIG_PL011_CLOCK 24000000 #define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE } #define CONFIG_CONS_INDEX 0 #define CONFIG_BAUDRATE 115200 /* Default baud rate */
-/* - * DMA - */ +/* DMA */ #define CONFIG_APBH_DMA
-/* - * MMC Driver - */ +/* MMC Driver */ #define CONFIG_ENV_IS_IN_MMC #ifdef CONFIG_ENV_IS_IN_MMC #define CONFIG_ENV_OFFSET (256 * 1024) @@ -146,9 +130,7 @@ #define CONFIG_MXS_MMC #endif
-/* - * NAND Driver - */ +/* NAND Driver */ #ifdef CONFIG_CMD_NAND #define CONFIG_NAND_MXS #define CONFIG_SYS_MAX_NAND_DEVICE 1 @@ -156,9 +138,7 @@ #define CONFIG_SYS_NAND_5_ADDR_CYCLE #endif
-/* - * Ethernet on SOC (FEC) - */ +/* Ethernet on SOC (FEC) */ #ifdef CONFIG_CMD_NET #define CONFIG_NET_MULTI #define CONFIG_ETHPRIME "FEC0" @@ -169,16 +149,12 @@ #define CONFIG_MX28_FEC_MAC_IN_OCOTP #endif
-/* - * RTC - */ +/* RTC */ #ifdef CONFIG_CMD_DATE #define CONFIG_RTC_MXS #endif
-/* - * USB - */ +/* USB */ #ifdef CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MXS @@ -197,9 +173,7 @@ #define CONFIG_SYS_I2C_SPEED 400000 #endif
-/* - * SPI - */ +/* SPI */ #ifdef CONFIG_CMD_SPI #define CONFIG_HARD_SPI #define CONFIG_MXS_SPI @@ -233,9 +207,7 @@ #endif #endif
-/* - * Boot Linux - */ +/* Boot Linux */ #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_BOOTDELAY 1 @@ -244,9 +216,7 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #define CONFIG_OF_LIBFDT
-/* - * Extra Environments - */ +/* Extra Environments */ #define CONFIG_EXTRA_ENV_SETTINGS \ "update_nand_full_filename=u-boot.nand\0" \ "update_nand_firmware_filename=u-boot.sb\0" \