On Fri, Dec 11, 2015 at 6:03 AM, Michal Simek michal.simek@xilinx.com wrote:
Do initialization via indirect register access.
I think you need to change the subject of this patch. It is identical the the previous one.
Signed-off-by: Michal Simek michal.simek@xilinx.com
drivers/net/xilinx_emaclite.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c index 654ad58cea3c..724b61e0b7e1 100644 --- a/drivers/net/xilinx_emaclite.c +++ b/drivers/net/xilinx_emaclite.c @@ -364,11 +364,10 @@ static int emaclite_init(struct eth_device *dev, bd_t *bis)
- RX - RX_PING & RX_PONG initialization
*/ /* Write out the value to flush the RX buffer */
out_be32 (dev->iobase + XEL_RSR_OFFSET, XEL_RSR_RECV_IE_MASK);
out_be32(®s->rx_ping_rsr, XEL_RSR_RECV_IE_MASK); if (emaclite->rxpp)
out_be32 (dev->iobase + XEL_RSR_OFFSET + XEL_BUFFER_OFFSET,XEL_RSR_RECV_IE_MASK);
out_be32(®s->rx_pong_rsr, XEL_RSR_RECV_IE_MASK);#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) || defined(CONFIG_PHYLIB) out_be32(®s->mdioctrl, XEL_MDIOCTRL_MDIOEN_MASK); -- 1.9.1
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot