Hello Gary,
in message 20080425144001.0cdb8f4e@peedub.jennejohn.org you wrote:
+#define CONFIG_IPADDR 192.168.1.67 +#define CONFIG_SERVERIP 192.168.1.50 +#define CONFIG_GATEWAYIP 192.168.1.1 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_ETHADDR 00:01:02:03:04:05 +#define CONFIG_ETH1ADDR 00:01:02:03:04:06
Are you really sure that you want to provide default MAC-addresses? We usually don't do this.
The customer had CONFIG_ETHADDR set in PPCBoot. I added CONFIG_ETH1ADDR analog to that, since I have CONFIG_NET_MULTI defined in quad100hd.h.
I personally don't care either way and have no problem with removing them. Don't know what the customer would have to say about that.
Please remove this stuff from the board conig file. It has no place there. Not to mention that the used MAC addresses are owned by the 3Com corporation, and we have no permission to use these.
Best regards,
Wolfgang Denk