On 12:28 Fri 21 Mar , Pieter Voorthuijsen wrote:
2nd try, previous one was wrapped: Double checked spaces and coding style...
Original message:
Hello,
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+/* This code sets up the timing params for EMIF CE2 and CE3 which
- connect to NOR and NAND flash
^ Whitespace please remove
- */
Please use this style of comment /* * .... * .... */
^ Whitespace please remove
#include <config.h>
.globl dv_board_init dv_board_init:
extern void timer_init(void); extern int eth_hw_init(void); extern phy_t phy;
please remove, only one emply line
/* Works on Always On power domain only (no PD argument) */ void lpsc_on(unsigned int id) {
/* Enable EMAC and AEMIF pins */ REG(PINMUX0) = 0x80000c1f;
/* Enable I2C pin Mux */ REG(PINMUX1) |= (1 << 7);
/* Set the Bus Priority Register to appropriate value */ REG(VBPR) = 0x20;
timer_init();
return(0); }
int misc_init_r (void) { int clk = 0;
clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1);
printf ("ARM Clock : %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27 ) / 2); printf ("DDR Clock : %dMHz\n", (clk / 2));
if (!eth_hw_init()) printf("ethernet init failed!\n"); else printf("ETH PHY : %s\n", phy.name);
please remove, only one emply line
return(0); }
Best Regards, J.