I working on the Katmai board. I'm trying to run a program in the 16MB boot flash. The user manual states the U-boot command to load Kozio diagnostics program is: => fatload xsa 0x1000000 /mnt-xsa/kdiags.katmai.img => bootm 0x1000000
This doesn't work as it does not define a device number, so I tried adding the device number with no luck. I'm using U-boot version 2009.06-rc1. Thanks.
Detlev Zundel wrote:
Hi dbrazeau,
This is the command I try to execute in the U-boot console: fatload xsa 0 0x1000000 /mnt-xsa/someprogram.img
output: ** Invalid boot device **
Do you pay for every character you send, or why are you so very restrictive in providing more information to your problem? Telling us on what platform you work, which U-Boot version etc. would go *a long way* in putting us into a better position to help you.
As "git grep xsa" yields no output I'm pretty sure that you try to do something which is not supported - at least in mainline.
What device exactly do you try to access?
Cheers Detlev
-- Insider comment on Microsoft releasing Linux Hyper-V driver code under GPLv2: "It looks like hell just froze over." -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu@denx.de _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot