7 Oct
2016
7 Oct
'16
12:37 p.m.
On 06/10/2016 00:27, Stefan Agner wrote:
From: Stefan Agner stefan.agner@toradex.com
This patchset adds device tree support for Colibri iMX7S/iMX7D. It is the first device tree enabled board for any i.MX 7 SoC hence the patchset adds some common infrastructure:
- Add device tree support for serial_mxc.
- imx7.dtsi - I descided to leave the s/d suffix since the SoCs are very similar and boards will likely use runtime detection to distinguish the two available SoCs.
- The pinmux file imx7d-pinfunc.h is taken from the Kernel and stored in the same place
Otherwise the conversion is quite straightforward and simplified the board code somewhat. Two patches enhance the board support with PMIC support, which has been the driver for this conversion.
Changes since v2:
- Drop CONFIG_CUSTOM_BOARDINFO again
- Add ifdef OF_CONTROL in serial-mxc driver to allow building the driver without OF support
Thanks - I merge the whole series and push to -master.
Regards, Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================