[U-Boot] [PATCH 30/93] arm: Remove apalis_imx6_nospl_it board

This board has not been converted to CONFIG_DM_BLK by the deadline. Remove it.

Signed-off-by: Simon Glass sjg@chromium.org ---

arch/arm/mach-imx/mx6/Kconfig | 1 - .../toradex/apalis_imx6/1066mhz_4x128mx16.cfg | 47 - .../toradex/apalis_imx6/1066mhz_4x256mx16.cfg | 47 - board/toradex/apalis_imx6/Kconfig | 55 - board/toradex/apalis_imx6/MAINTAINERS | 9 - board/toradex/apalis_imx6/Makefile | 5 - board/toradex/apalis_imx6/apalis_imx6.c | 1236 ----------------- board/toradex/apalis_imx6/apalis_imx6q.cfg | 33 - board/toradex/apalis_imx6/clocks.cfg | 41 - board/toradex/apalis_imx6/ddr-setup.cfg | 96 -- board/toradex/apalis_imx6/do_fuse.c | 97 -- board/toradex/apalis_imx6/pf0100.c | 230 --- board/toradex/apalis_imx6/pf0100.h | 52 - board/toradex/apalis_imx6/pf0100_otp.inc | 190 --- configs/apalis_imx6_defconfig | 75 - configs/apalis_imx6_nospl_com_defconfig | 63 - configs/apalis_imx6_nospl_it_defconfig | 63 - include/configs/apalis_imx6.h | 277 ---- 18 files changed, 2617 deletions(-) delete mode 100644 board/toradex/apalis_imx6/1066mhz_4x128mx16.cfg delete mode 100644 board/toradex/apalis_imx6/1066mhz_4x256mx16.cfg delete mode 100644 board/toradex/apalis_imx6/Kconfig delete mode 100644 board/toradex/apalis_imx6/MAINTAINERS delete mode 100644 board/toradex/apalis_imx6/Makefile delete mode 100644 board/toradex/apalis_imx6/apalis_imx6.c delete mode 100644 board/toradex/apalis_imx6/apalis_imx6q.cfg delete mode 100644 board/toradex/apalis_imx6/clocks.cfg delete mode 100644 board/toradex/apalis_imx6/ddr-setup.cfg delete mode 100644 board/toradex/apalis_imx6/do_fuse.c delete mode 100644 board/toradex/apalis_imx6/pf0100.c delete mode 100644 board/toradex/apalis_imx6/pf0100.h delete mode 100644 board/toradex/apalis_imx6/pf0100_otp.inc delete mode 100644 configs/apalis_imx6_defconfig delete mode 100644 configs/apalis_imx6_nospl_com_defconfig delete mode 100644 configs/apalis_imx6_nospl_it_defconfig delete mode 100644 include/configs/apalis_imx6.h

diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index de9bf156ce2..0cfb565dd70 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -556,7 +556,6 @@ source "board/seco/Kconfig" source "board/solidrun/mx6cuboxi/Kconfig" source "board/technexion/pico-imx6ul/Kconfig" source "board/tqc/tqma6/Kconfig" -source "board/toradex/apalis_imx6/Kconfig" source "board/toradex/colibri-imx6ull/Kconfig" source "board/k+p/kp_imx6q_tpc/Kconfig" source "board/udoo/Kconfig" diff --git a/board/toradex/apalis_imx6/1066mhz_4x128mx16.cfg b/board/toradex/apalis_imx6/1066mhz_4x128mx16.cfg deleted file mode 100644 index 29d1c3126c5..00000000000 --- a/board/toradex/apalis_imx6/1066mhz_4x128mx16.cfg +++ /dev/null @@ -1,47 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2013 Boundary Devices - * Copyright (C) 2014-2016 Toradex AG - */ - -DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036 -DATA 4, MX6_MMDC_P0_MDCFG0, 0x555A7954 -DATA 4, MX6_MMDC_P0_MDCFG1, 0xDB328F64 -DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB -DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 -DATA 4, MX6_MMDC_P0_MDOR, 0x005A1023 -DATA 4, MX6_MMDC_P0_MDOTC, 0x09555050 -DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576 -DATA 4, MX6_MMDC_P0_MDASP, 0x00000027 -DATA 4, MX6_MMDC_P0_MDCTL, 0x831A0000 -DATA 4, MX6_MMDC_P0_MDSCR, 0x04088032 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00428031 -DATA 4, MX6_MMDC_P0_MDSCR, 0x19308030 -DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 -DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003 -DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003 -DATA 4, MX6_MMDC_P0_MDREF, 0x00005800 -DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00000000 -DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00000000 - -DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x432A0338 -DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x03260324 -DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x43340344 -DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x031E027C - -DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x33272D2E -DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x2F312B37 - -DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3A35433C -DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x4336453F - -DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x0009000E -DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x0018000B -DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00060015 -DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x0006000E - -DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 -DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 -DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 diff --git a/board/toradex/apalis_imx6/1066mhz_4x256mx16.cfg b/board/toradex/apalis_imx6/1066mhz_4x256mx16.cfg deleted file mode 100644 index 02e90dd5e65..00000000000 --- a/board/toradex/apalis_imx6/1066mhz_4x256mx16.cfg +++ /dev/null @@ -1,47 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2013 Boundary Devices - * Copyright (C) 2014-2016 Toradex AG - */ - -DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036 -DATA 4, MX6_MMDC_P0_MDCFG0, 0x898E78f5 -DATA 4, MX6_MMDC_P0_MDCFG1, 0xff328f64 -DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB -DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 -DATA 4, MX6_MMDC_P0_MDOR, 0x008E1023 -DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040 -DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576 -DATA 4, MX6_MMDC_P0_MDASP, 0x00000047 -DATA 4, MX6_MMDC_P0_MDCTL, 0x841A0000 -DATA 4, MX6_MMDC_P0_MDSCR, 0x02888032 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031 -DATA 4, MX6_MMDC_P0_MDSCR, 0x19408030 -DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 -DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003 -DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003 -DATA 4, MX6_MMDC_P0_MDREF, 0x00007800 -DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 -DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 - -DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x03300338 -DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x03240324 -DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x03440350 -DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x032C0308 - -DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x40363C3E -DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x3C3E3C46 - -DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x403E463E -DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x4A384C46 - -DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x0009000E -DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x0018000B -DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00060015 -DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x0006000E - -DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 -DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 -DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 diff --git a/board/toradex/apalis_imx6/Kconfig b/board/toradex/apalis_imx6/Kconfig deleted file mode 100644 index 14f8c10c64c..00000000000 --- a/board/toradex/apalis_imx6/Kconfig +++ /dev/null @@ -1,55 +0,0 @@ -if TARGET_APALIS_IMX6 - -config SYS_BOARD - default "apalis_imx6" - -config SYS_CONFIG_NAME - default "apalis_imx6" - -config SYS_CPU - default "armv7" - -config SYS_SOC - default "mx6" - -config SYS_VENDOR - default "toradex" - -config TDX_CFG_BLOCK - default y - -config TDX_HAVE_MMC - default y - -config TDX_CFG_BLOCK_DEV - default "0" - -config TDX_CFG_BLOCK_PART - default "1" - -# Toradex config block in eMMC, at the end of 1st "boot sector" -config TDX_CFG_BLOCK_OFFSET - default "-512" - -config TDX_CMD_IMX_MFGR - bool "Enable factory testing commands for Toradex iMX 6 modules" - help - This adds the commands - pf0100_otp_prog - Program the OTP fuses on the PMIC PF0100 - If executed on already fused modules it doesn't change any fuse setting. - default y - -config TDX_APALIS_IMX6_V1_0 - bool "Apalis iMX6 V1.0 HW" - help - Apalis iMX6 V1.0 HW has a different pinout for the UART. - The UARTs must be used in DCE mode, RTS/CTS are swapped and - thus unusable on standard carrier boards. - This option configures DCE mode unconditionally. Whithout this - option the config block stating V1.0 HW selects DCE mode, - otherwise the UARTs are configuered in DTE mode. - default n - -source "board/toradex/common/Kconfig" - -endif diff --git a/board/toradex/apalis_imx6/MAINTAINERS b/board/toradex/apalis_imx6/MAINTAINERS deleted file mode 100644 index 2c70ab4fbd9..00000000000 --- a/board/toradex/apalis_imx6/MAINTAINERS +++ /dev/null @@ -1,9 +0,0 @@ -Apalis iMX6 -M: Max Krummenacher max.krummenacher@toradex.com -W: http://developer.toradex.com/software/linux/linux-software -S: Maintained -F: board/toradex/apalis_imx6/ -F: include/configs/apalis_imx6.h -F: configs/apalis_imx6_defconfig -F: configs/apalis_imx6_nospl_com_defconfig -F: configs/apalis_imx6_nospl_it_defconfig diff --git a/board/toradex/apalis_imx6/Makefile b/board/toradex/apalis_imx6/Makefile deleted file mode 100644 index 128f1794d16..00000000000 --- a/board/toradex/apalis_imx6/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# Copyright (c) 2012-2014 Toradex, Inc. -# SPDX-License-Identifier: GPL-2.0+ - -obj-y := apalis_imx6.o do_fuse.o -obj-$(CONFIG_TDX_CMD_IMX_MFGR) += pf0100.o diff --git a/board/toradex/apalis_imx6/apalis_imx6.c b/board/toradex/apalis_imx6/apalis_imx6.c deleted file mode 100644 index 368db9c488c..00000000000 --- a/board/toradex/apalis_imx6/apalis_imx6.c +++ /dev/null @@ -1,1236 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2010-2013 Freescale Semiconductor, Inc. - * Copyright (C) 2013, Boundary Devices info@boundarydevices.com - * Copyright (C) 2014-2016, Toradex AG - * copied from nitrogen6x - */ - -#include <common.h> -#include <dm.h> -#include <environment.h> -#include <asm/arch/clock.h> -#include <asm/arch/crm_regs.h> -#include <asm/arch/mxc_hdmi.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/iomux.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/mx6-pins.h> -#include <asm/arch/mx6-ddr.h> -#include <asm/bootm.h> -#include <asm/gpio.h> -#include <asm/io.h> -#include <asm/mach-imx/iomux-v3.h> -#include <asm/mach-imx/mxc_i2c.h> -#include <asm/mach-imx/sata.h> -#include <asm/mach-imx/boot_mode.h> -#include <asm/mach-imx/video.h> -#include <dm/platform_data/serial_mxc.h> -#include <dm/platdata.h> -#include <fsl_esdhc.h> -#include <i2c.h> -#include <input.h> -#include <imx_thermal.h> -#include <linux/errno.h> -#include <malloc.h> -#include <mmc.h> -#include <micrel.h> -#include <miiphy.h> -#include <netdev.h> - -#include "../common/tdx-cfg-block.h" -#ifdef CONFIG_TDX_CMD_IMX_MFGR -#include "pf0100.h" -#endif - -DECLARE_GLOBAL_DATA_PTR; - -#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ - PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ - PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ - PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) - -#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) - -#define BUTTON_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) - -#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ - PAD_CTL_ODE | PAD_CTL_SRE_FAST) - -#define WEAK_PULLUP (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ - PAD_CTL_SRE_SLOW) - -#define NO_PULLUP ( \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ - PAD_CTL_SRE_SLOW) - -#define WEAK_PULLDOWN (PAD_CTL_PUS_100K_DOWN | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ - PAD_CTL_HYS | PAD_CTL_SRE_SLOW) - -#define TRISTATE (PAD_CTL_HYS | PAD_CTL_SPEED_MED) - -#define OUTPUT_40OHM (PAD_CTL_SPEED_MED|PAD_CTL_DSE_40ohm) - -#define OUTPUT_RGB (PAD_CTL_SPEED_MED|PAD_CTL_DSE_60ohm|PAD_CTL_SRE_FAST) - -int dram_init(void) -{ - /* use the DDR controllers configured size */ - gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, - (ulong)imx_ddr_size()); - - return 0; -} - -/* Apalis UART1 */ -iomux_v3_cfg_t const uart1_pads_dce[] = { - MX6_PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), -}; -iomux_v3_cfg_t const uart1_pads_dte[] = { - MX6_PAD_CSI0_DAT10__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_CSI0_DAT11__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - -#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) -/* Apalis I2C1 */ -struct i2c_pads_info i2c_pad_info1 = { - .scl = { - .i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | PC, - .gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | PC, - .gp = IMX_GPIO_NR(5, 27) - }, - .sda = { - .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | PC, - .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | PC, - .gp = IMX_GPIO_NR(5, 26) - } -}; - -/* Apalis local, PMIC, SGTL5000, STMPE811 */ -struct i2c_pads_info i2c_pad_info_loc = { - .scl = { - .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC, - .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | PC, - .gp = IMX_GPIO_NR(4, 12) - }, - .sda = { - .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC, - .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | PC, - .gp = IMX_GPIO_NR(4, 13) - } -}; - -/* Apalis I2C3 / CAM */ -struct i2c_pads_info i2c_pad_info3 = { - .scl = { - .i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC, - .gpio_mode = MX6_PAD_EIM_D17__GPIO3_IO17 | PC, - .gp = IMX_GPIO_NR(3, 17) - }, - .sda = { - .i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC, - .gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC, - .gp = IMX_GPIO_NR(3, 18) - } -}; - -/* Apalis I2C2 / DDC */ -struct i2c_pads_info i2c_pad_info_ddc = { - .scl = { - .i2c_mode = MX6_PAD_EIM_EB2__HDMI_TX_DDC_SCL | PC, - .gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC, - .gp = IMX_GPIO_NR(2, 30) - }, - .sda = { - .i2c_mode = MX6_PAD_EIM_D16__HDMI_TX_DDC_SDA | PC, - .gpio_mode = MX6_PAD_EIM_D16__GPIO3_IO16 | PC, - .gp = IMX_GPIO_NR(3, 16) - } -}; - -/* Apalis MMC1 */ -iomux_v3_cfg_t const usdhc1_pads[] = { - MX6_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD1_DAT0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD1_DAT1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD1_DAT2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD1_DAT3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_NANDF_D0__SD1_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_NANDF_D1__SD1_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_NANDF_D2__SD1_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_NANDF_D3__SD1_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_DI0_PIN4__GPIO4_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ -# define GPIO_MMC_CD IMX_GPIO_NR(4, 20) -}; - -/* Apalis SD1 */ -iomux_v3_cfg_t const usdhc2_pads[] = { - MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_NANDF_CS1__GPIO6_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ -# define GPIO_SD_CD IMX_GPIO_NR(6, 14) -}; - -/* eMMC */ -iomux_v3_cfg_t const usdhc3_pads[] = { - MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_RST__GPIO7_IO08 | MUX_PAD_CTRL(WEAK_PULLUP), -}; - -int mx6_rgmii_rework(struct phy_device *phydev) -{ - /* control data pad skew - devaddr = 0x02, register = 0x04 */ - ksz9031_phy_extended_write(phydev, 0x02, - MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW, - MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000); - /* rx data pad skew - devaddr = 0x02, register = 0x05 */ - ksz9031_phy_extended_write(phydev, 0x02, - MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, - MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000); - /* tx data pad skew - devaddr = 0x02, register = 0x05 */ - ksz9031_phy_extended_write(phydev, 0x02, - MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, - MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000); - /* gtx and rx clock pad skew - devaddr = 0x02, register = 0x08 */ - ksz9031_phy_extended_write(phydev, 0x02, - MII_KSZ9031_EXT_RGMII_CLOCK_SKEW, - MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x03FF); - return 0; -} - -iomux_v3_cfg_t const enet_pads[] = { - MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), - /* KSZ9031 PHY Reset */ - MX6_PAD_ENET_CRS_DV__GPIO1_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL), -# define GPIO_ENET_PHY_RESET IMX_GPIO_NR(1, 25) -}; - -static void setup_iomux_enet(void) -{ - imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); -} - -static int reset_enet_phy(struct mii_dev *bus) -{ - /* Reset KSZ9031 PHY */ - gpio_direction_output(GPIO_ENET_PHY_RESET, 0); - mdelay(10); - gpio_set_value(GPIO_ENET_PHY_RESET, 1); - - return 0; -} - -/* mux the Apalis GPIO pins, so they can be used from the U-Boot cmdline */ -iomux_v3_cfg_t const gpio_pads[] = { - /* Apalis GPIO1 - GPIO8 */ - MX6_PAD_NANDF_D4__GPIO2_IO04 | MUX_PAD_CTRL(WEAK_PULLUP), - MX6_PAD_NANDF_D5__GPIO2_IO05 | MUX_PAD_CTRL(WEAK_PULLUP), - MX6_PAD_NANDF_D6__GPIO2_IO06 | MUX_PAD_CTRL(WEAK_PULLUP), - MX6_PAD_NANDF_D7__GPIO2_IO07 | MUX_PAD_CTRL(WEAK_PULLUP), - MX6_PAD_NANDF_RB0__GPIO6_IO10 | MUX_PAD_CTRL(WEAK_PULLUP), - MX6_PAD_NANDF_WP_B__GPIO6_IO09 | MUX_PAD_CTRL(WEAK_PULLUP), - MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(WEAK_PULLDOWN), - MX6_PAD_GPIO_6__GPIO1_IO06 | MUX_PAD_CTRL(WEAK_PULLUP), - MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(WEAK_PULLUP), -}; - -static void setup_iomux_gpio(void) -{ - imx_iomux_v3_setup_multiple_pads(gpio_pads, ARRAY_SIZE(gpio_pads)); -} - -iomux_v3_cfg_t const usb_pads[] = { - /* USBH_EN */ - MX6_PAD_GPIO_0__GPIO1_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL), -# define GPIO_USBH_EN IMX_GPIO_NR(1, 0) - /* USB_VBUS_DET */ - MX6_PAD_EIM_D28__GPIO3_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL), -# define GPIO_USB_VBUS_DET IMX_GPIO_NR(3, 28) - /* USBO1_ID */ - MX6_PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(WEAK_PULLUP), - /* USBO1_EN */ - MX6_PAD_EIM_D22__GPIO3_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL), -# define GPIO_USBO_EN IMX_GPIO_NR(3, 22) -}; - -/* - * UARTs are used in DTE mode, switch the mode on all UARTs before - * any pinmuxing connects a (DCE) output to a transceiver output. - */ -#define UFCR 0x90 /* FIFO Control Register */ -#define UFCR_DCEDTE (1<<6) /* DCE=0 */ - -static void setup_dtemode_uart(void) -{ - setbits_le32((u32 *)(UART1_BASE + UFCR), UFCR_DCEDTE); - setbits_le32((u32 *)(UART2_BASE + UFCR), UFCR_DCEDTE); - setbits_le32((u32 *)(UART4_BASE + UFCR), UFCR_DCEDTE); - setbits_le32((u32 *)(UART5_BASE + UFCR), UFCR_DCEDTE); -} -static void setup_dcemode_uart(void) -{ - clrbits_le32((u32 *)(UART1_BASE + UFCR), UFCR_DCEDTE); - clrbits_le32((u32 *)(UART2_BASE + UFCR), UFCR_DCEDTE); - clrbits_le32((u32 *)(UART4_BASE + UFCR), UFCR_DCEDTE); - clrbits_le32((u32 *)(UART5_BASE + UFCR), UFCR_DCEDTE); -} - -static void setup_iomux_dte_uart(void) -{ - setup_dtemode_uart(); - imx_iomux_v3_setup_multiple_pads(uart1_pads_dte, - ARRAY_SIZE(uart1_pads_dte)); -} - -static void setup_iomux_dce_uart(void) -{ - setup_dcemode_uart(); - imx_iomux_v3_setup_multiple_pads(uart1_pads_dce, - ARRAY_SIZE(uart1_pads_dce)); -} - -#ifdef CONFIG_USB_EHCI_MX6 -int board_ehci_hcd_init(int port) -{ - imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads)); - return 0; -} - -int board_ehci_power(int port, int on) -{ - switch (port) { - case 0: - /* control OTG power */ - gpio_direction_output(GPIO_USBO_EN, on); - mdelay(100); - break; - case 1: - /* Control MXM USBH */ - gpio_direction_output(GPIO_USBH_EN, on); - mdelay(2); - /* Control onboard USB Hub VBUS */ - gpio_direction_output(GPIO_USB_VBUS_DET, on); - mdelay(100); - break; - default: - break; - } - return 0; -} -#endif - -#ifdef CONFIG_FSL_ESDHC -/* use the following sequence: eMMC, MMC, SD */ -struct fsl_esdhc_cfg usdhc_cfg[CONFIG_SYS_FSL_USDHC_NUM] = { - {USDHC3_BASE_ADDR}, - {USDHC1_BASE_ADDR}, - {USDHC2_BASE_ADDR}, -}; - -int board_mmc_getcd(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - int ret = true; /* default: assume inserted */ - - switch (cfg->esdhc_base) { - case USDHC1_BASE_ADDR: - gpio_direction_input(GPIO_MMC_CD); - ret = !gpio_get_value(GPIO_MMC_CD); - break; - case USDHC2_BASE_ADDR: - gpio_direction_input(GPIO_SD_CD); - ret = !gpio_get_value(GPIO_SD_CD); - break; - } - - return ret; -} - -int board_mmc_init(bd_t *bis) -{ -#ifndef CONFIG_SPL_BUILD - s32 status = 0; - u32 index = 0; - - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); - usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - - usdhc_cfg[0].max_bus_width = 8; - usdhc_cfg[1].max_bus_width = 8; - usdhc_cfg[2].max_bus_width = 4; - - for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) { - switch (index) { - case 0: - imx_iomux_v3_setup_multiple_pads( - usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); - break; - case 1: - imx_iomux_v3_setup_multiple_pads( - usdhc1_pads, ARRAY_SIZE(usdhc1_pads)); - break; - case 2: - imx_iomux_v3_setup_multiple_pads( - usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); - break; - default: - printf("Warning: you configured more USDHC controllers (%d) then supported by the board (%d)\n", - index + 1, CONFIG_SYS_FSL_USDHC_NUM); - return status; - } - - status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]); - } - - return status; -#else - struct src *psrc = (struct src *)SRC_BASE_ADDR; - unsigned reg = readl(&psrc->sbmr1) >> 11; - /* - * Upon reading BOOT_CFG register the following map is done: - * Bit 11 and 12 of BOOT_CFG register can determine the current - * mmc port - * 0x1 SD1 - * 0x2 SD2 - * 0x3 SD4 - */ - - switch (reg & 0x3) { - case 0x0: - imx_iomux_v3_setup_multiple_pads( - usdhc1_pads, ARRAY_SIZE(usdhc1_pads)); - usdhc_cfg[0].esdhc_base = USDHC1_BASE_ADDR; - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); - gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk; - break; - case 0x1: - imx_iomux_v3_setup_multiple_pads( - usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); - usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR; - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk; - break; - case 0x2: - imx_iomux_v3_setup_multiple_pads( - usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); - usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR; - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk; - break; - default: - puts("MMC boot device not available"); - } - - return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); -#endif -} -#endif - -int board_phy_config(struct phy_device *phydev) -{ - mx6_rgmii_rework(phydev); - if (phydev->drv->config) - phydev->drv->config(phydev); - - return 0; -} - -int board_eth_init(bd_t *bis) -{ - uint32_t base = IMX_FEC_BASE; - struct mii_dev *bus = NULL; - struct phy_device *phydev = NULL; - int ret; - - setup_iomux_enet(); - -#ifdef CONFIG_FEC_MXC - bus = fec_get_miibus(base, -1); - if (!bus) - return 0; - bus->reset = reset_enet_phy; - /* scan PHY 4,5,6,7 */ - phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII); - if (!phydev) { - free(bus); - puts("no PHY found\n"); - return 0; - } - printf("using PHY at %d\n", phydev->addr); - ret = fec_probe(bis, -1, base, bus, phydev); - if (ret) { - printf("FEC MXC: %s:failed\n", __func__); - free(phydev); - free(bus); - } -#endif - return 0; -} - -static iomux_v3_cfg_t const pwr_intb_pads[] = { - /* - * the bootrom sets the iomux to vselect, potentially connecting - * two outputs. Set this back to GPIO - */ - MX6_PAD_GPIO_18__GPIO7_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL) -}; - -#if defined(CONFIG_VIDEO_IPUV3) - -static iomux_v3_cfg_t const backlight_pads[] = { - /* Backlight on RGB connector: J15 */ - MX6_PAD_EIM_DA13__GPIO3_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL), -#define RGB_BACKLIGHT_GP IMX_GPIO_NR(3, 13) - /* additional CPU pin on BKL_PWM, keep in tristate */ - MX6_PAD_EIM_DA14__GPIO3_IO14 | MUX_PAD_CTRL(TRISTATE), - /* Backlight PWM, used as GPIO in U-Boot */ - MX6_PAD_SD4_DAT2__GPIO2_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL), -#define RGB_BACKLIGHTPWM_GP IMX_GPIO_NR(2, 10) - /* buffer output enable 0: buffer enabled */ - MX6_PAD_EIM_A25__GPIO5_IO02 | MUX_PAD_CTRL(WEAK_PULLUP), -#define RGB_BACKLIGHTPWM_OE IMX_GPIO_NR(5, 2) - /* PSAVE# integrated VDAC */ - MX6_PAD_EIM_BCLK__GPIO6_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL), -#define VGA_PSAVE_NOT_GP IMX_GPIO_NR(6, 31) -}; - -static iomux_v3_cfg_t const rgb_pads[] = { - MX6_PAD_EIM_A16__IPU1_DI1_DISP_CLK | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_DA10__IPU1_DI1_PIN15 | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_DA11__IPU1_DI1_PIN02 | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_DA12__IPU1_DI1_PIN03 | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_DA9__IPU1_DISP1_DATA00 | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_DA8__IPU1_DISP1_DATA01 | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_DA7__IPU1_DISP1_DATA02 | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_DA6__IPU1_DISP1_DATA03 | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_DA5__IPU1_DISP1_DATA04 | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_DA4__IPU1_DISP1_DATA05 | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_DA3__IPU1_DISP1_DATA06 | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_DA2__IPU1_DISP1_DATA07 | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_DA1__IPU1_DISP1_DATA08 | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_DA0__IPU1_DISP1_DATA09 | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_EB1__IPU1_DISP1_DATA10 | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_EB0__IPU1_DISP1_DATA11 | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_A17__IPU1_DISP1_DATA12 | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_A18__IPU1_DISP1_DATA13 | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_A19__IPU1_DISP1_DATA14 | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_A20__IPU1_DISP1_DATA15 | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_A21__IPU1_DISP1_DATA16 | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_A22__IPU1_DISP1_DATA17 | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_A23__IPU1_DISP1_DATA18 | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_A24__IPU1_DISP1_DATA19 | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_D26__IPU1_DISP1_DATA22 | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_D27__IPU1_DISP1_DATA23 | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_D30__IPU1_DISP1_DATA21 | MUX_PAD_CTRL(OUTPUT_RGB), - MX6_PAD_EIM_D31__IPU1_DISP1_DATA20 | MUX_PAD_CTRL(OUTPUT_RGB), -}; - -static void do_enable_hdmi(struct display_info_t const *dev) -{ - imx_enable_hdmi_phy(); -} - -static int detect_i2c(struct display_info_t const *dev) -{ - return (0 == i2c_set_bus_num(dev->bus)) && - (0 == i2c_probe(dev->addr)); -} - -static void enable_lvds(struct display_info_t const *dev) -{ - struct iomuxc *iomux = (struct iomuxc *) - IOMUXC_BASE_ADDR; - u32 reg = readl(&iomux->gpr[2]); - reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT; - writel(reg, &iomux->gpr[2]); - gpio_direction_output(RGB_BACKLIGHT_GP, 1); - gpio_direction_output(RGB_BACKLIGHTPWM_GP, 0); - gpio_direction_output(RGB_BACKLIGHTPWM_OE, 0); -} - -static void enable_rgb(struct display_info_t const *dev) -{ - imx_iomux_v3_setup_multiple_pads( - rgb_pads, - ARRAY_SIZE(rgb_pads)); - gpio_direction_output(RGB_BACKLIGHT_GP, 1); - gpio_direction_output(RGB_BACKLIGHTPWM_GP, 0); - gpio_direction_output(RGB_BACKLIGHTPWM_OE, 0); -} - -static int detect_default(struct display_info_t const *dev) -{ - (void) dev; - return 1; -} - -struct display_info_t const displays[] = {{ - .bus = -1, - .addr = 0, - .pixfmt = IPU_PIX_FMT_RGB24, - .detect = detect_hdmi, - .enable = do_enable_hdmi, - .mode = { - .name = "HDMI", - .refresh = 60, - .xres = 1024, - .yres = 768, - .pixclock = 15385, - .left_margin = 220, - .right_margin = 40, - .upper_margin = 21, - .lower_margin = 7, - .hsync_len = 60, - .vsync_len = 10, - .sync = FB_SYNC_EXT, - .vmode = FB_VMODE_NONINTERLACED -} }, { - .bus = -1, - .addr = 0, - .di = 1, - .pixfmt = IPU_PIX_FMT_RGB24, - .detect = detect_default, - .enable = enable_rgb, - .mode = { - .name = "vga-rgb", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 33000, - .left_margin = 48, - .right_margin = 16, - .upper_margin = 31, - .lower_margin = 11, - .hsync_len = 96, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED -} }, { - .bus = -1, - .addr = 0, - .di = 1, - .pixfmt = IPU_PIX_FMT_RGB24, - .enable = enable_rgb, - .mode = { - .name = "wvga-rgb", - .refresh = 60, - .xres = 800, - .yres = 480, - .pixclock = 25000, - .left_margin = 40, - .right_margin = 88, - .upper_margin = 33, - .lower_margin = 10, - .hsync_len = 128, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED -} }, { - .bus = -1, - .addr = 0, - .pixfmt = IPU_PIX_FMT_LVDS666, - .detect = detect_i2c, - .enable = enable_lvds, - .mode = { - .name = "wsvga-lvds", - .refresh = 60, - .xres = 1024, - .yres = 600, - .pixclock = 15385, - .left_margin = 220, - .right_margin = 40, - .upper_margin = 21, - .lower_margin = 7, - .hsync_len = 60, - .vsync_len = 10, - .sync = FB_SYNC_EXT, - .vmode = FB_VMODE_NONINTERLACED -} } }; -size_t display_count = ARRAY_SIZE(displays); - -static void setup_display(void) -{ - struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; - struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; - int reg; - - enable_ipu_clock(); - imx_setup_hdmi(); - /* Turn on LDB0,IPU,IPU DI0 clocks */ - reg = __raw_readl(&mxc_ccm->CCGR3); - reg |= MXC_CCM_CCGR3_LDB_DI0_MASK; - writel(reg, &mxc_ccm->CCGR3); - - /* set LDB0, LDB1 clk select to 011/011 */ - reg = readl(&mxc_ccm->cs2cdr); - reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK - |MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK); - reg |= (3<<MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET) - |(3<<MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET); - writel(reg, &mxc_ccm->cs2cdr); - - reg = readl(&mxc_ccm->cscmr2); - reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV; - writel(reg, &mxc_ccm->cscmr2); - - reg = readl(&mxc_ccm->chsccdr); - reg |= (CHSCCDR_CLK_SEL_LDB_DI0 - <<MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET); - writel(reg, &mxc_ccm->chsccdr); - - reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES - |IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH - |IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW - |IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG - |IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT - |IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG - |IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT - |IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED - |IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0; - writel(reg, &iomux->gpr[2]); - - reg = readl(&iomux->gpr[3]); - reg = (reg & ~(IOMUXC_GPR3_LVDS0_MUX_CTL_MASK - |IOMUXC_GPR3_HDMI_MUX_CTL_MASK)) - | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0 - <<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET); - writel(reg, &iomux->gpr[3]); - - /* backlight unconditionally on for now */ - imx_iomux_v3_setup_multiple_pads(backlight_pads, - ARRAY_SIZE(backlight_pads)); - /* use 0 for EDT 7", use 1 for LG fullHD panel */ - gpio_direction_output(RGB_BACKLIGHTPWM_GP, 0); - gpio_direction_output(RGB_BACKLIGHTPWM_OE, 0); - gpio_direction_output(RGB_BACKLIGHT_GP, 1); -} -#endif /* defined(CONFIG_VIDEO_IPUV3) */ - -int board_early_init_f(void) -{ - imx_iomux_v3_setup_multiple_pads(pwr_intb_pads, - ARRAY_SIZE(pwr_intb_pads)); -#ifndef CONFIG_TDX_APALIS_IMX6_V1_0 - setup_iomux_dte_uart(); -#else - setup_iomux_dce_uart(); -#endif - return 0; -} - -/* - * Do not overwrite the console - * Use always serial for U-Boot console - */ -int overwrite_console(void) -{ - return 1; -} - -int board_init(void) -{ - /* address of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - - setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); - setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info_loc); - setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3); - -#if defined(CONFIG_VIDEO_IPUV3) - setup_display(); -#endif - -#ifdef CONFIG_TDX_CMD_IMX_MFGR - (void) pmic_init(); -#endif - -#ifdef CONFIG_SATA - setup_sata(); -#endif - - setup_iomux_gpio(); - - return 0; -} - -#ifdef CONFIG_BOARD_LATE_INIT -int board_late_init(void) -{ -#if defined(CONFIG_REVISION_TAG) && \ - defined(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG) - char env_str[256]; - u32 rev; - - rev = get_board_rev(); - snprintf(env_str, ARRAY_SIZE(env_str), "%.4x", rev); - env_set("board_rev", env_str); - -#ifndef CONFIG_TDX_APALIS_IMX6_V1_0 - if ((rev & 0xfff0) == 0x0100) { - char *fdt_env; - - /* reconfigure the UART to DCE mode dynamically if on V1.0 HW */ - setup_iomux_dce_uart(); - - /* if using the default device tree, use version for V1.0 HW */ - fdt_env = env_get("fdt_file"); - if ((fdt_env != NULL) && (strcmp(FDT_FILE, fdt_env) == 0)) { - env_set("fdt_file", FDT_FILE_V1_0); - printf("patching fdt_file to " FDT_FILE_V1_0 "\n"); -#ifndef CONFIG_ENV_IS_NOWHERE - env_save(); -#endif - } - } -#endif /* CONFIG_TDX_APALIS_IMX6_V1_0 */ -#endif /* CONFIG_REVISION_TAG */ - - return 0; -} -#endif /* CONFIG_BOARD_LATE_INIT */ - -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_SYSTEM_SETUP) -int ft_system_setup(void *blob, bd_t *bd) -{ - return 0; -} -#endif - -int checkboard(void) -{ - char it[] = " IT"; - int minc, maxc; - - switch (get_cpu_temp_grade(&minc, &maxc)) { - case TEMP_AUTOMOTIVE: - case TEMP_INDUSTRIAL: - break; - case TEMP_EXTCOMMERCIAL: - default: - it[0] = 0; - }; - printf("Model: Toradex Apalis iMX6 %s %s%s\n", - is_cpu_type(MXC_CPU_MX6D) ? "Dual" : "Quad", - (gd->ram_size == 0x80000000) ? "2GB" : - (gd->ram_size == 0x40000000) ? "1GB" : "512MB", it); - return 0; -} - -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -int ft_board_setup(void *blob, bd_t *bd) -{ - return ft_common_board_setup(blob, bd); -} -#endif - -#ifdef CONFIG_CMD_BMODE -static const struct boot_mode board_boot_modes[] = { - /* 4-bit bus width */ - {"mmc", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)}, - {"sd", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)}, - {NULL, 0}, -}; -#endif - -int misc_init_r(void) -{ -#ifdef CONFIG_CMD_BMODE - add_board_boot_modes(board_boot_modes); -#endif - return 0; -} - -#ifdef CONFIG_LDO_BYPASS_CHECK -/* TODO, use external pmic, for now always ldo_enable */ -void ldo_mode_set(int ldo_bypass) -{ - return; -} -#endif - -#ifdef CONFIG_SPL_BUILD -#include <spl.h> -#include <linux/libfdt.h> -#include "asm/arch/mx6q-ddr.h" -#include "asm/arch/iomux.h" -#include "asm/arch/crm_regs.h" - -static int mx6_com_dcd_table[] = { -/* ddr-setup.cfg */ -MX6_IOM_DRAM_SDQS0, 0x00000030, -MX6_IOM_DRAM_SDQS1, 0x00000030, -MX6_IOM_DRAM_SDQS2, 0x00000030, -MX6_IOM_DRAM_SDQS3, 0x00000030, -MX6_IOM_DRAM_SDQS4, 0x00000030, -MX6_IOM_DRAM_SDQS5, 0x00000030, -MX6_IOM_DRAM_SDQS6, 0x00000030, -MX6_IOM_DRAM_SDQS7, 0x00000030, - -MX6_IOM_GRP_B0DS, 0x00000030, -MX6_IOM_GRP_B1DS, 0x00000030, -MX6_IOM_GRP_B2DS, 0x00000030, -MX6_IOM_GRP_B3DS, 0x00000030, -MX6_IOM_GRP_B4DS, 0x00000030, -MX6_IOM_GRP_B5DS, 0x00000030, -MX6_IOM_GRP_B6DS, 0x00000030, -MX6_IOM_GRP_B7DS, 0x00000030, -MX6_IOM_GRP_ADDDS, 0x00000030, -/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */ -MX6_IOM_GRP_CTLDS, 0x00000030, - -MX6_IOM_DRAM_DQM0, 0x00020030, -MX6_IOM_DRAM_DQM1, 0x00020030, -MX6_IOM_DRAM_DQM2, 0x00020030, -MX6_IOM_DRAM_DQM3, 0x00020030, -MX6_IOM_DRAM_DQM4, 0x00020030, -MX6_IOM_DRAM_DQM5, 0x00020030, -MX6_IOM_DRAM_DQM6, 0x00020030, -MX6_IOM_DRAM_DQM7, 0x00020030, - -MX6_IOM_DRAM_CAS, 0x00020030, -MX6_IOM_DRAM_RAS, 0x00020030, -MX6_IOM_DRAM_SDCLK_0, 0x00020030, -MX6_IOM_DRAM_SDCLK_1, 0x00020030, - -MX6_IOM_DRAM_RESET, 0x00020030, -MX6_IOM_DRAM_SDCKE0, 0x00003000, -MX6_IOM_DRAM_SDCKE1, 0x00003000, - -MX6_IOM_DRAM_SDODT0, 0x00003030, -MX6_IOM_DRAM_SDODT1, 0x00003030, - -/* (differential input) */ -MX6_IOM_DDRMODE_CTL, 0x00020000, -/* (differential input) */ -MX6_IOM_GRP_DDRMODE, 0x00020000, -/* disable ddr pullups */ -MX6_IOM_GRP_DDRPKE, 0x00000000, -MX6_IOM_DRAM_SDBA2, 0x00000000, -/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */ -MX6_IOM_GRP_DDR_TYPE, 0x000C0000, - -/* Read data DQ Byte0-3 delay */ -MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333, -MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333, -MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333, -MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333, -MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333, -MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333, -MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333, -MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333, - -/* - * MDMISC mirroring interleaved (row/bank/col) - */ -MX6_MMDC_P0_MDMISC, 0x00081740, - -/* - * MDSCR con_req - */ -MX6_MMDC_P0_MDSCR, 0x00008000, - -/* 1066mhz_4x128mx16.cfg */ - -MX6_MMDC_P0_MDPDC, 0x00020036, -MX6_MMDC_P0_MDCFG0, 0x555A7954, -MX6_MMDC_P0_MDCFG1, 0xDB328F64, -MX6_MMDC_P0_MDCFG2, 0x01FF00DB, -MX6_MMDC_P0_MDRWD, 0x000026D2, -MX6_MMDC_P0_MDOR, 0x005A1023, -MX6_MMDC_P0_MDOTC, 0x09555050, -MX6_MMDC_P0_MDPDC, 0x00025576, -MX6_MMDC_P0_MDASP, 0x00000027, -MX6_MMDC_P0_MDCTL, 0x831A0000, -MX6_MMDC_P0_MDSCR, 0x04088032, -MX6_MMDC_P0_MDSCR, 0x00008033, -MX6_MMDC_P0_MDSCR, 0x00428031, -MX6_MMDC_P0_MDSCR, 0x19308030, -MX6_MMDC_P0_MDSCR, 0x04008040, -MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003, -MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003, -MX6_MMDC_P0_MDREF, 0x00005800, -MX6_MMDC_P0_MPODTCTRL, 0x00000000, -MX6_MMDC_P1_MPODTCTRL, 0x00000000, - -MX6_MMDC_P0_MPDGCTRL0, 0x432A0338, -MX6_MMDC_P0_MPDGCTRL1, 0x03260324, -MX6_MMDC_P1_MPDGCTRL0, 0x43340344, -MX6_MMDC_P1_MPDGCTRL1, 0x031E027C, - -MX6_MMDC_P0_MPRDDLCTL, 0x33272D2E, -MX6_MMDC_P1_MPRDDLCTL, 0x2F312B37, - -MX6_MMDC_P0_MPWRDLCTL, 0x3A35433C, -MX6_MMDC_P1_MPWRDLCTL, 0x4336453F, - -MX6_MMDC_P0_MPWLDECTRL0, 0x0009000E, -MX6_MMDC_P0_MPWLDECTRL1, 0x0018000B, -MX6_MMDC_P1_MPWLDECTRL0, 0x00060015, -MX6_MMDC_P1_MPWLDECTRL1, 0x0006000E, - -MX6_MMDC_P0_MPMUR0, 0x00000800, -MX6_MMDC_P1_MPMUR0, 0x00000800, -MX6_MMDC_P0_MDSCR, 0x00000000, -MX6_MMDC_P0_MAPSR, 0x00011006, -}; - -static int mx6_it_dcd_table[] = { -/* ddr-setup.cfg */ -MX6_IOM_DRAM_SDQS0, 0x00000030, -MX6_IOM_DRAM_SDQS1, 0x00000030, -MX6_IOM_DRAM_SDQS2, 0x00000030, -MX6_IOM_DRAM_SDQS3, 0x00000030, -MX6_IOM_DRAM_SDQS4, 0x00000030, -MX6_IOM_DRAM_SDQS5, 0x00000030, -MX6_IOM_DRAM_SDQS6, 0x00000030, -MX6_IOM_DRAM_SDQS7, 0x00000030, - -MX6_IOM_GRP_B0DS, 0x00000030, -MX6_IOM_GRP_B1DS, 0x00000030, -MX6_IOM_GRP_B2DS, 0x00000030, -MX6_IOM_GRP_B3DS, 0x00000030, -MX6_IOM_GRP_B4DS, 0x00000030, -MX6_IOM_GRP_B5DS, 0x00000030, -MX6_IOM_GRP_B6DS, 0x00000030, -MX6_IOM_GRP_B7DS, 0x00000030, -MX6_IOM_GRP_ADDDS, 0x00000030, -/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */ -MX6_IOM_GRP_CTLDS, 0x00000030, - -MX6_IOM_DRAM_DQM0, 0x00020030, -MX6_IOM_DRAM_DQM1, 0x00020030, -MX6_IOM_DRAM_DQM2, 0x00020030, -MX6_IOM_DRAM_DQM3, 0x00020030, -MX6_IOM_DRAM_DQM4, 0x00020030, -MX6_IOM_DRAM_DQM5, 0x00020030, -MX6_IOM_DRAM_DQM6, 0x00020030, -MX6_IOM_DRAM_DQM7, 0x00020030, - -MX6_IOM_DRAM_CAS, 0x00020030, -MX6_IOM_DRAM_RAS, 0x00020030, -MX6_IOM_DRAM_SDCLK_0, 0x00020030, -MX6_IOM_DRAM_SDCLK_1, 0x00020030, - -MX6_IOM_DRAM_RESET, 0x00020030, -MX6_IOM_DRAM_SDCKE0, 0x00003000, -MX6_IOM_DRAM_SDCKE1, 0x00003000, - -MX6_IOM_DRAM_SDODT0, 0x00003030, -MX6_IOM_DRAM_SDODT1, 0x00003030, - -/* (differential input) */ -MX6_IOM_DDRMODE_CTL, 0x00020000, -/* (differential input) */ -MX6_IOM_GRP_DDRMODE, 0x00020000, -/* disable ddr pullups */ -MX6_IOM_GRP_DDRPKE, 0x00000000, -MX6_IOM_DRAM_SDBA2, 0x00000000, -/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */ -MX6_IOM_GRP_DDR_TYPE, 0x000C0000, - -/* Read data DQ Byte0-3 delay */ -MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333, -MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333, -MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333, -MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333, -MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333, -MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333, -MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333, -MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333, - -/* - * MDMISC mirroring interleaved (row/bank/col) - */ -MX6_MMDC_P0_MDMISC, 0x00081740, - -/* - * MDSCR con_req - */ -MX6_MMDC_P0_MDSCR, 0x00008000, - -/* 1066mhz_4x256mx16.cfg */ - -MX6_MMDC_P0_MDPDC, 0x00020036, -MX6_MMDC_P0_MDCFG0, 0x898E78f5, -MX6_MMDC_P0_MDCFG1, 0xff328f64, -MX6_MMDC_P0_MDCFG2, 0x01FF00DB, -MX6_MMDC_P0_MDRWD, 0x000026D2, -MX6_MMDC_P0_MDOR, 0x008E1023, -MX6_MMDC_P0_MDOTC, 0x09444040, -MX6_MMDC_P0_MDPDC, 0x00025576, -MX6_MMDC_P0_MDASP, 0x00000047, -MX6_MMDC_P0_MDCTL, 0x841A0000, -MX6_MMDC_P0_MDSCR, 0x02888032, -MX6_MMDC_P0_MDSCR, 0x00008033, -MX6_MMDC_P0_MDSCR, 0x00048031, -MX6_MMDC_P0_MDSCR, 0x19408030, -MX6_MMDC_P0_MDSCR, 0x04008040, -MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003, -MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003, -MX6_MMDC_P0_MDREF, 0x00007800, -MX6_MMDC_P0_MPODTCTRL, 0x00022227, -MX6_MMDC_P1_MPODTCTRL, 0x00022227, - -MX6_MMDC_P0_MPDGCTRL0, 0x03300338, -MX6_MMDC_P0_MPDGCTRL1, 0x03240324, -MX6_MMDC_P1_MPDGCTRL0, 0x03440350, -MX6_MMDC_P1_MPDGCTRL1, 0x032C0308, - -MX6_MMDC_P0_MPRDDLCTL, 0x40363C3E, -MX6_MMDC_P1_MPRDDLCTL, 0x3C3E3C46, - -MX6_MMDC_P0_MPWRDLCTL, 0x403E463E, -MX6_MMDC_P1_MPWRDLCTL, 0x4A384C46, - -MX6_MMDC_P0_MPWLDECTRL0, 0x0009000E, -MX6_MMDC_P0_MPWLDECTRL1, 0x0018000B, -MX6_MMDC_P1_MPWLDECTRL0, 0x00060015, -MX6_MMDC_P1_MPWLDECTRL1, 0x0006000E, - -MX6_MMDC_P0_MPMUR0, 0x00000800, -MX6_MMDC_P1_MPMUR0, 0x00000800, -MX6_MMDC_P0_MDSCR, 0x00000000, -MX6_MMDC_P0_MAPSR, 0x00011006, -}; - - -static void ccgr_init(void) -{ - struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; - - writel(0x00C03F3F, &ccm->CCGR0); - writel(0x0030FC03, &ccm->CCGR1); - writel(0x0FFFFFF3, &ccm->CCGR2); - writel(0x3FF0300F, &ccm->CCGR3); - writel(0x00FFF300, &ccm->CCGR4); - writel(0x0F0000F3, &ccm->CCGR5); - writel(0x000003FF, &ccm->CCGR6); - -/* - * Setup CCM_CCOSR register as follows: - * - * cko1_en = 1 --> CKO1 enabled - * cko1_div = 111 --> divide by 8 - * cko1_sel = 1011 --> ahb_clk_root - * - * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz - */ - writel(0x000000FB, &ccm->ccosr); -} - -static void ddr_init(int *table, int size) -{ - int i; - - for (i = 0; i < size / 2 ; i++) - writel(table[2 * i + 1], table[2 * i]); -} - -static void spl_dram_init(void) -{ - int minc, maxc; - - switch (get_cpu_temp_grade(&minc, &maxc)) { - case TEMP_COMMERCIAL: - case TEMP_EXTCOMMERCIAL: - puts("Commercial temperature grade DDR3 timings.\n"); - ddr_init(mx6_com_dcd_table, ARRAY_SIZE(mx6_com_dcd_table)); - break; - case TEMP_INDUSTRIAL: - case TEMP_AUTOMOTIVE: - default: - puts("Industrial temperature grade DDR3 timings.\n"); - ddr_init(mx6_it_dcd_table, ARRAY_SIZE(mx6_it_dcd_table)); - break; - }; - udelay(100); -} - -void board_init_f(ulong dummy) -{ - /* setup AIPS and disable watchdog */ - arch_cpu_init(); - - ccgr_init(); - gpr_init(); - - /* iomux and setup of i2c */ - board_early_init_f(); - - /* setup GP timer */ - timer_init(); - - /* UART clocks enabled and gd valid - init serial console */ - preloader_console_init(); - -#ifndef CONFIG_TDX_APALIS_IMX6_V1_0 - /* Make sure we use dte mode */ - setup_dtemode_uart(); -#endif - - /* DDR initialization */ - spl_dram_init(); - - /* Clear the BSS. */ - memset(__bss_start, 0, __bss_end - __bss_start); - - /* load/boot image from boot device */ - board_init_r(NULL, 0); -} - -void reset_cpu(ulong addr) -{ -} - -#endif - -static struct mxc_serial_platdata mxc_serial_plat = { - .reg = (struct mxc_uart *)UART1_BASE, - .use_dte = true, -}; - -U_BOOT_DEVICE(mxc_serial) = { - .name = "serial_mxc", - .platdata = &mxc_serial_plat, -}; diff --git a/board/toradex/apalis_imx6/apalis_imx6q.cfg b/board/toradex/apalis_imx6/apalis_imx6q.cfg deleted file mode 100644 index 739b1b70615..00000000000 --- a/board/toradex/apalis_imx6/apalis_imx6q.cfg +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2013 Boundary Devices - * Copyright (C) 2014-2016, Toradex AG - * - * Refer doc/README.imximage for more details about how-to configure - * and create imximage boot image - * - * The syntax is taken as close as possible with the kwbimage - */ - -/* image version */ -IMAGE_VERSION 2 - -/* - * Boot Device : one of - * spi, sd (the board has no nand neither onenand) - */ -BOOT_FROM sd - -#define __ASSEMBLY__ -#include <config.h> -#include "asm/arch/mx6-ddr.h" -#include "asm/arch/iomux.h" -#include "asm/arch/crm_regs.h" - -#include "ddr-setup.cfg" -#if CONFIG_DDR_MB == 2048 -#include "1066mhz_4x256mx16.cfg" -#else -#include "1066mhz_4x128mx16.cfg" -#endif -#include "clocks.cfg" diff --git a/board/toradex/apalis_imx6/clocks.cfg b/board/toradex/apalis_imx6/clocks.cfg deleted file mode 100644 index 1bcbc4fa380..00000000000 --- a/board/toradex/apalis_imx6/clocks.cfg +++ /dev/null @@ -1,41 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2013 Boundary Devices - * Copyright (C) 2014-2016, Toradex AG - * - * Device Configuration Data (DCD) - * - * Each entry must have the format: - * Addr-type Address Value - * - * where: - * Addr-type register length (1,2 or 4 bytes) - * Address absolute address of the register - * value value to be stored in the register - */ - -/* set the default clock gate to save power */ -DATA 4, CCM_CCGR0, 0x00C03F3F -DATA 4, CCM_CCGR1, 0x0030FC03 -DATA 4, CCM_CCGR2, 0x0FFFC000 -DATA 4, CCM_CCGR3, 0x3FF00000 -DATA 4, CCM_CCGR4, 0x00FFF300 -DATA 4, CCM_CCGR5, 0x0F0000C3 -DATA 4, CCM_CCGR6, 0x000003FF - -/* enable AXI cache for VDOA/VPU/IPU */ -DATA 4, MX6_IOMUXC_GPR4, 0xF00000CF -/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ -DATA 4, MX6_IOMUXC_GPR6, 0x007F007F -DATA 4, MX6_IOMUXC_GPR7, 0x007F007F - -/* - * Setup CCM_CCOSR register as follows: - * - * cko1_en = 1 --> CKO1 enabled - * cko1_div = 111 --> divide by 8 - * cko1_sel = 1011 --> ahb_clk_root - * - * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz - */ -DATA 4, CCM_CCOSR, 0x000000fb diff --git a/board/toradex/apalis_imx6/ddr-setup.cfg b/board/toradex/apalis_imx6/ddr-setup.cfg deleted file mode 100644 index e42e3ce4387..00000000000 --- a/board/toradex/apalis_imx6/ddr-setup.cfg +++ /dev/null @@ -1,96 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2013 Boundary Devices - * Copyright (C) 2014-2016, Toradex AG - * - * Device Configuration Data (DCD) - * - * Each entry must have the format: - * Addr-type Address Value - * - * where: - * Addr-type register length (1,2 or 4 bytes) - * Address absolute address of the register - * value value to be stored in the register - */ - -/* - * DDR3 settings - * MX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock), - * memory bus width: 64 bits x16/x32/x64 - * MX6DL ddr is limited to 800 MHz(400 MHz clock) - * memory bus width: 64 bits x16/x32/x64 - * MX6SOLO ddr is limited to 800 MHz(400 MHz clock) - * memory bus width: 32 bits x16/x32 - */ -DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000030 - -DATA 4, MX6_IOM_GRP_B0DS, 0x00000030 -DATA 4, MX6_IOM_GRP_B1DS, 0x00000030 -DATA 4, MX6_IOM_GRP_B2DS, 0x00000030 -DATA 4, MX6_IOM_GRP_B3DS, 0x00000030 -DATA 4, MX6_IOM_GRP_B4DS, 0x00000030 -DATA 4, MX6_IOM_GRP_B5DS, 0x00000030 -DATA 4, MX6_IOM_GRP_B6DS, 0x00000030 -DATA 4, MX6_IOM_GRP_B7DS, 0x00000030 -DATA 4, MX6_IOM_GRP_ADDDS, 0x00000030 -/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */ -DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030 - -DATA 4, MX6_IOM_DRAM_DQM0, 0x00020030 -DATA 4, MX6_IOM_DRAM_DQM1, 0x00020030 -DATA 4, MX6_IOM_DRAM_DQM2, 0x00020030 -DATA 4, MX6_IOM_DRAM_DQM3, 0x00020030 -DATA 4, MX6_IOM_DRAM_DQM4, 0x00020030 -DATA 4, MX6_IOM_DRAM_DQM5, 0x00020030 -DATA 4, MX6_IOM_DRAM_DQM6, 0x00020030 -DATA 4, MX6_IOM_DRAM_DQM7, 0x00020030 - -DATA 4, MX6_IOM_DRAM_CAS, 0x00020030 -DATA 4, MX6_IOM_DRAM_RAS, 0x00020030 -DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00020030 -DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00020030 - -DATA 4, MX6_IOM_DRAM_RESET, 0x00020030 -DATA 4, MX6_IOM_DRAM_SDCKE0, 0x00003000 -DATA 4, MX6_IOM_DRAM_SDCKE1, 0x00003000 - -DATA 4, MX6_IOM_DRAM_SDODT0, 0x00003030 -DATA 4, MX6_IOM_DRAM_SDODT1, 0x00003030 - -/* (differential input) */ -DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000 -/* (differential input) */ -DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000 -/* disable ddr pullups */ -DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000 -DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000 -/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */ -DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000 - -/* Read data DQ Byte0-3 delay */ -DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333 -DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333 -DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333 -DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333 -DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333 -DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333 -DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333 -DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333 - -/* - * MDMISC mirroring interleaved (row/bank/col) - */ -DATA 4, MX6_MMDC_P0_MDMISC, 0x00081740 - -/* - * MDSCR con_req - */ -DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 diff --git a/board/toradex/apalis_imx6/do_fuse.c b/board/toradex/apalis_imx6/do_fuse.c deleted file mode 100644 index e6793e366a3..00000000000 --- a/board/toradex/apalis_imx6/do_fuse.c +++ /dev/null @@ -1,97 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2014-2016, Toradex AG - */ - -/* - * Helpers for i.MX OTP fusing during module production -*/ - -#include <common.h> -#ifndef CONFIG_SPL_BUILD -#include <console.h> -#include <fuse.h> - -static int mfgr_fuse(void) -{ - unsigned val, val6; - - fuse_sense(0, 5, &val); - printf("Fuse 0, 5: %8x\n", val); - fuse_sense(0, 6, &val6); - printf("Fuse 0, 6: %8x\n", val6); - fuse_sense(4, 3, &val); - printf("Fuse 4, 3: %8x\n", val); - fuse_sense(4, 2, &val); - printf("Fuse 4, 2: %8x\n", val); - if (val6 & 0x10) { - puts("BT_FUSE_SEL already fused, will do nothing\n"); - return CMD_RET_FAILURE; - } - /* boot cfg */ - fuse_prog(0, 5, 0x00005072); - /* BT_FUSE_SEL */ - fuse_prog(0, 6, 0x00000010); - return CMD_RET_SUCCESS; -} - -int do_mfgr_fuse(cmd_tbl_t *cmdtp, int flag, int argc, - char * const argv[]) -{ - int ret; - puts("Fusing...\n"); - ret = mfgr_fuse(); - if (ret == CMD_RET_SUCCESS) - puts("done.\n"); - else - puts("failed.\n"); - return ret; -} - -int do_updt_fuse(cmd_tbl_t *cmdtp, int flag, int argc, - char * const argv[]) -{ - unsigned val; - int ret; - int confirmed = argc >= 1 && !strcmp(argv[1], "-y"); - - /* can be used in scripts for command availability check */ - if (argc >= 1 && !strcmp(argv[1], "-n")) - return CMD_RET_SUCCESS; - - /* boot cfg */ - fuse_sense(0, 5, &val); - printf("Fuse 0, 5: %8x\n", val); - if (val & 0x10) { - puts("Fast boot mode already fused, no need to fuse\n"); - return CMD_RET_SUCCESS; - } - if (!confirmed) { - puts("Warning: Programming fuses is an irreversible operation!\n" - " Updating to fast boot mode prevents easy\n" - " downgrading to previous BSP versions.\n" - "\nReally perform this fuse programming? <y/N>\n"); - if (!confirm_yesno()) - return CMD_RET_FAILURE; - } - puts("Fusing fast boot mode...\n"); - ret = fuse_prog(0, 5, 0x00005072); - if (ret == CMD_RET_SUCCESS) - puts("done.\n"); - else - puts("failed.\n"); - return ret; -} - -U_BOOT_CMD( - mfgr_fuse, 1, 0, do_mfgr_fuse, - "OTP fusing during module production", - "" -); - -U_BOOT_CMD( - updt_fuse, 2, 0, do_updt_fuse, - "OTP fusing during module update", - "updt_fuse [-n] [-y] - boot cfg fast boot mode fusing" -); -#endif /* CONFIG_SPL_BUILD */ diff --git a/board/toradex/apalis_imx6/pf0100.c b/board/toradex/apalis_imx6/pf0100.c deleted file mode 100644 index 7334e92f2ef..00000000000 --- a/board/toradex/apalis_imx6/pf0100.c +++ /dev/null @@ -1,230 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2014-2016, Toradex AG - */ - -/* - * Helpers for Freescale PMIC PF0100 -*/ - -#include <common.h> -#include <i2c.h> -#include <linux/compiler.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/iomux.h> -#include <asm/arch/mx6-pins.h> -#include <asm/gpio.h> -#include <asm/mach-imx/iomux-v3.h> - -#include "pf0100_otp.inc" -#include "pf0100.h" - -/* define for PMIC register dump */ -/*#define DEBUG */ - -/* use Apalis GPIO1 to switch on VPGM, ON: 1 */ -static __maybe_unused iomux_v3_cfg_t const pmic_prog_pads[] = { - MX6_PAD_NANDF_D4__GPIO2_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), -# define PMIC_PROG_VOLTAGE IMX_GPIO_NR(2, 4) -}; - -unsigned pmic_init(void) -{ - unsigned programmed = 0; - uchar bus = 1; - uchar devid, revid, val; - - puts("PMIC: "); - if (!((0 == i2c_set_bus_num(bus)) && - (0 == i2c_probe(PFUZE100_I2C_ADDR)))) { - puts("i2c bus failed\n"); - return 0; - } - /* get device ident */ - if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_DEVICEID, 1, &devid, 1) < 0) { - puts("i2c pmic devid read failed\n"); - return 0; - } - if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_REVID, 1, &revid, 1) < 0) { - puts("i2c pmic revid read failed\n"); - return 0; - } - printf("device id: 0x%.2x, revision id: 0x%.2x\n", devid, revid); - -#ifdef DEBUG - { - unsigned i, j; - - for (i = 0; i < 16; i++) - printf("\t%x", i); - for (j = 0; j < 0x80; ) { - printf("\n%2x", j); - for (i = 0; i < 16; i++) { - i2c_read(PFUZE100_I2C_ADDR, j+i, 1, &val, 1); - printf("\t%2x", val); - } - j += 0x10; - } - printf("\nEXT Page 1"); - - val = PFUZE100_PAGE_REGISTER_PAGE1; - if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_PAGE_REGISTER, 1, - &val, 1)) { - puts("i2c write failed\n"); - return 0; - } - - for (j = 0x80; j < 0x100; ) { - printf("\n%2x", j); - for (i = 0; i < 16; i++) { - i2c_read(PFUZE100_I2C_ADDR, j+i, 1, &val, 1); - printf("\t%2x", val); - } - j += 0x10; - } - printf("\nEXT Page 2"); - - val = PFUZE100_PAGE_REGISTER_PAGE2; - if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_PAGE_REGISTER, 1, - &val, 1)) { - puts("i2c write failed\n"); - return 0; - } - - for (j = 0x80; j < 0x100; ) { - printf("\n%2x", j); - for (i = 0; i < 16; i++) { - i2c_read(PFUZE100_I2C_ADDR, j+i, 1, &val, 1); - printf("\t%2x", val); - } - j += 0x10; - } - printf("\n"); - } -#endif - /* get device programmed state */ - val = PFUZE100_PAGE_REGISTER_PAGE1; - if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_PAGE_REGISTER, 1, &val, 1)) { - puts("i2c write failed\n"); - return 0; - } - if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR1, 1, &val, 1) < 0) { - puts("i2c fuse_por read failed\n"); - return 0; - } - if (val & PFUZE100_FUSE_POR_M) - programmed++; - - if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR2, 1, &val, 1) < 0) { - puts("i2c fuse_por read failed\n"); - return programmed; - } - if (val & PFUZE100_FUSE_POR_M) - programmed++; - - if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR3, 1, &val, 1) < 0) { - puts("i2c fuse_por read failed\n"); - return programmed; - } - if (val & PFUZE100_FUSE_POR_M) - programmed++; - - switch (programmed) { - case 0: - printf("PMIC: not programmed\n"); - break; - case 3: - printf("PMIC: programmed\n"); - break; - default: - printf("PMIC: undefined programming state\n"); - break; - } - - /* The following is needed during production */ - if (programmed != 3) { - /* set VGEN1 to 1.2V */ - val = PFUZE100_VGEN1_VAL; - if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_VGEN1CTL, 1, - &val, 1)) { - puts("i2c write failed\n"); - return programmed; - } - - /* set SWBST to 5.0V */ - val = PFUZE100_SWBST_VAL; - if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_SWBSTCTL, 1, - &val, 1)) { - puts("i2c write failed\n"); - } - } - return programmed; -} - -#ifndef CONFIG_SPL_BUILD -static int pf0100_prog(void) -{ - unsigned char bus = 1; - unsigned char val; - unsigned int i; - - if (pmic_init() == 3) { - puts("PMIC already programmed, exiting\n"); - return CMD_RET_FAILURE; - } - /* set up gpio to manipulate vprog, initially off */ - imx_iomux_v3_setup_multiple_pads(pmic_prog_pads, - ARRAY_SIZE(pmic_prog_pads)); - gpio_direction_output(PMIC_PROG_VOLTAGE, 0); - - if (!((0 == i2c_set_bus_num(bus)) && - (0 == i2c_probe(PFUZE100_I2C_ADDR)))) { - puts("i2c bus failed\n"); - return CMD_RET_FAILURE; - } - - for (i = 0; i < ARRAY_SIZE(pmic_otp_prog); i++) { - switch (pmic_otp_prog[i].cmd) { - case pmic_i2c: - val = (unsigned char) (pmic_otp_prog[i].value & 0xff); - if (i2c_write(PFUZE100_I2C_ADDR, pmic_otp_prog[i].reg, - 1, &val, 1)) { - printf("i2c write failed, reg 0x%2x, value 0x%2x\n", - pmic_otp_prog[i].reg, val); - return CMD_RET_FAILURE; - } - break; - case pmic_delay: - udelay(pmic_otp_prog[i].value * 1000); - break; - case pmic_vpgm: - gpio_direction_output(PMIC_PROG_VOLTAGE, - pmic_otp_prog[i].value); - break; - case pmic_pwr: - /* TODO */ - break; - } - } - return CMD_RET_SUCCESS; -} - -static int do_pf0100_prog(cmd_tbl_t *cmdtp, int flag, int argc, - char * const argv[]) -{ - int ret; - puts("Programming PMIC OTP..."); - ret = pf0100_prog(); - if (ret == CMD_RET_SUCCESS) - puts("done.\n"); - else - puts("failed.\n"); - return ret; -} - -U_BOOT_CMD( - pf0100_otp_prog, 1, 0, do_pf0100_prog, - "Program the OTP fuses on the PMIC PF0100", - "" -); -#endif diff --git a/board/toradex/apalis_imx6/pf0100.h b/board/toradex/apalis_imx6/pf0100.h deleted file mode 100644 index c0efb79bbc9..00000000000 --- a/board/toradex/apalis_imx6/pf0100.h +++ /dev/null @@ -1,52 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2014-2016, Toradex AG - */ - -/* - * Helpers for Freescale PMIC PF0100 -*/ - -#ifndef PF0100_H_ -#define PF0100_H_ - -/* 7-bit I2C bus slave address */ -#define PFUZE100_I2C_ADDR (0x08) -/* Register Addresses */ -#define PFUZE100_DEVICEID (0x0) -#define PFUZE100_REVID (0x3) -#define PFUZE100_SW1AMODE (0x23) -#define PFUZE100_SW1ACON 36 -#define PFUZE100_SW1ACON_SPEED_VAL (0x1<<6) /*default */ -#define PFUZE100_SW1ACON_SPEED_M (0x3<<6) -#define PFUZE100_SW1CCON 49 -#define PFUZE100_SW1CCON_SPEED_VAL (0x1<<6) /*default */ -#define PFUZE100_SW1CCON_SPEED_M (0x3<<6) -#define PFUZE100_SW1AVOL 32 -#define PFUZE100_SW1AVOL_VSEL_M (0x3f<<0) -#define PFUZE100_SW1CVOL 46 -#define PFUZE100_SW1CVOL_VSEL_M (0x3f<<0) -#define PFUZE100_VGEN1CTL (0x6c) -#define PFUZE100_VGEN1_VAL (0x30 + 0x08) /* Always ON, 1.2V */ -#define PFUZE100_SWBSTCTL (0x66) -/* Always ON, Auto Switching Mode, 5.0V */ -#define PFUZE100_SWBST_VAL (0x40 + 0x08 + 0x00) - -/* chooses the extended page (registers 0x80..0xff) */ -#define PFUZE100_PAGE_REGISTER 0x7f -#define PFUZE100_PAGE_REGISTER_PAGE_M (0x1f << 0) -#define PFUZE100_PAGE_REGISTER_PAGE1 (0x01 & PFUZE100_PAGE_REGISTER_PAGE_M) -#define PFUZE100_PAGE_REGISTER_PAGE2 (0x02 & PFUZE100_PAGE_REGISTER_PAGE_M) - -/* extended page 1 */ -#define PFUZE100_FUSE_POR1 0xe4 -#define PFUZE100_FUSE_POR2 0xe5 -#define PFUZE100_FUSE_POR3 0xe6 -#define PFUZE100_FUSE_POR_M (0x1 << 1) - - -/* output some informational messages, return the number FUSE_POR=1 */ -/* i.e. 0: unprogrammed, 3: programmed, other: undefined prog. state */ -unsigned pmic_init(void); - -#endif /* PF0100_H_ */ diff --git a/board/toradex/apalis_imx6/pf0100_otp.inc b/board/toradex/apalis_imx6/pf0100_otp.inc deleted file mode 100644 index a7790fd6c60..00000000000 --- a/board/toradex/apalis_imx6/pf0100_otp.inc +++ /dev/null @@ -1,190 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2014-2016, Toradex AG - */ - -// Register Output for PF0100 programmer -// Customer: Toradex AG -// Program: Apalis iMX6 -// Sample marking: -// Date: 12.02.2014 -// Time: 17:16:41 -// Generated from Spreadsheet Revision: P1.8 - -/* sed commands to get from programmer script to struct */ -/* sed -e 's/^WRITE_I2C:(..):(..)/{pmic_i2c, 0x\1, 0x\2},/g' -e 's/^DELAY:([0-9]*)/{pmic_delay, 0, \1},/g' pf0100_otp.txt > pf0100_otp.inc - sed -i -e 's/^VPGM:ON/{pmic_vpgm, 0, 1},/g' -e 's/^VPGM:OFF/{pmic_vpgm, 0, 0},/g' pf0100_otp.inc - sed -i -e 's/^PWRON: HIGH/{pmic_pwr, 0, 1},/g' -e 's/^PWRON:LOW/{pmic_pwr, 0, 0},/g' pf0100_otp.inc */ - -enum { pmic_i2c, pmic_delay, pmic_vpgm, pmic_pwr }; -struct pmic_otp_prog_t{ - unsigned char cmd; - unsigned char reg; - unsigned short value; -}; - -struct pmic_otp_prog_t pmic_otp_prog[] = { -{pmic_i2c, 0x7F, 0x01}, // Access FSL EXT Page 1 -{pmic_i2c, 0xA0, 0x2B}, // Auto gen from Row94 -{pmic_i2c, 0xA1, 0x01}, // Auto gen from Row95 -{pmic_i2c, 0xA2, 0x05}, // Auto gen from Row96 -{pmic_i2c, 0xA8, 0x2B}, // Auto gen from Row102 -{pmic_i2c, 0xA9, 0x02}, // Auto gen from Row103 -{pmic_i2c, 0xAA, 0x01}, // Auto gen from Row104 -{pmic_i2c, 0xAC, 0x18}, // Auto gen from Row106 -{pmic_i2c, 0xAE, 0x01}, // Auto gen from Row108 -{pmic_i2c, 0xB0, 0x2C}, // Auto gen from Row110 -{pmic_i2c, 0xB1, 0x04}, // Auto gen from Row111 -{pmic_i2c, 0xB2, 0x01}, // Auto gen from Row112 -{pmic_i2c, 0xB4, 0x2C}, // Auto gen from Row114 -{pmic_i2c, 0xB5, 0x04}, // Auto gen from Row115 -{pmic_i2c, 0xB6, 0x01}, // Auto gen from Row116 -{pmic_i2c, 0xB8, 0x18}, // Auto gen from Row118 -{pmic_i2c, 0xBA, 0x01}, // Auto gen from Row120 -{pmic_i2c, 0xBD, 0x1F}, // Auto gen from Row123 -{pmic_i2c, 0xC0, 0x06}, // Auto gen from Row126 -{pmic_i2c, 0xC4, 0x04}, // Auto gen from Row130 -{pmic_i2c, 0xC8, 0x0E}, // Auto gen from Row134 -{pmic_i2c, 0xC9, 0x08}, // Auto gen from Row135 -{pmic_i2c, 0xCC, 0x0E}, // Auto gen from Row138 -{pmic_i2c, 0xCD, 0x05}, // Auto gen from Row139 -{pmic_i2c, 0xD0, 0x0C}, // Auto gen from Row142 -{pmic_i2c, 0xD1, 0x05}, // Auto gen from Row143 -{pmic_i2c, 0xD5, 0x07}, // Auto gen from Row147 -{pmic_i2c, 0xD8, 0x07}, // Auto gen from Row150 -{pmic_i2c, 0xD9, 0x06}, // Auto gen from Row151 -{pmic_i2c, 0xDC, 0x0A}, // Auto gen from Row154 -{pmic_i2c, 0xDD, 0x03}, // Auto gen from Row155 -{pmic_i2c, 0xE0, 0x07}, // Auto gen from Row158 - -#if 0 /* TBB mode */ -{pmic_i2c, 0xE4, 0x80}, // TBB_POR = 1 -{pmic_delay, 0, 10}, -#else -// Write OTP -{pmic_i2c, 0xE4, 0x02}, // FUSE POR1=1 -{pmic_i2c, 0xE5, 0x02}, // FUSE POR2=1 -{pmic_i2c, 0xE6, 0x02}, // FUSE POR3=1 -{pmic_i2c, 0xF0, 0x1F}, // Enable ECC for fuse banks 1 to 5 by writing to OTP EN ECC0 register -{pmic_i2c, 0xF1, 0x1F}, // Enable ECC for fuse banks 6 to 10 by writing to OTP EN ECC1 register -{pmic_i2c, 0x7F, 0x02}, // Access PF0100 EXT Page2 -{pmic_i2c, 0xD0, 0x1F}, // Set Auto ECC for fuse banks 1 to 5 by writing to OTP AUTO ECC0 register -{pmic_i2c, 0xD1, 0x1F}, // Set Auto ECC for fuse banks 6 to 10 by writing to OTP AUTO ECC1 register -//----------------------------------------------------------------------------------- -{pmic_i2c, 0xF1, 0x00}, // Reset Bank 1 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xF2, 0x00}, // Reset Bank 2 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xF3, 0x00}, // Reset Bank 3 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xF4, 0x00}, // Reset Bank 4 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xF5, 0x00}, // Reset Bank 5 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xF6, 0x00}, // Reset Bank 6 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xF7, 0x00}, // Reset Bank 7 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xF8, 0x00}, // Reset Bank 8 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xF9, 0x00}, // Reset Bank 9 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xFA, 0x00}, // Reset Bank 10 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -//----------------------------------------------------------------------------------- -{pmic_vpgm, 0, 1}, // Turn ON 8V SWBST -//VPGM:DOWN:n -//VPGM:UP:n -{pmic_delay, 0, 500}, // Adds 500msec delay to allow VPGM time to ramp up -//----------------------------------------------------------------------------------- -// PF0100 OTP MANUAL-PROGRAMMING (BANK 1 thru 10) -//----------------------------------------------------------------------------------- -// BANK 1 -//----------------------------------------------------------------------------------- -{pmic_i2c, 0xF1, 0x00}, // Reset Bank 1 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xF1, 0x03}, // Set Bank 1 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xF1, 0x0B}, // Set Bank 1 ANTIFUSE_EN -{pmic_delay, 0, 10}, // Allow time for bank programming to complete -{pmic_i2c, 0xF1, 0x03}, // Reset Bank 1 ANTIFUSE_EN -{pmic_i2c, 0xF1, 0x00}, // Reset Bank 1 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -//----------------------------------------------------------------------------------- -// BANK 2 -//----------------------------------------------------------------------------------- -{pmic_i2c, 0xF2, 0x00}, // Reset Bank 2 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xF2, 0x03}, // Set Bank 2 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xF2, 0x0B}, // Set Bank 2 ANTIFUSE_EN -{pmic_delay, 0, 10}, // Allow time for bank programming to complete -{pmic_i2c, 0xF2, 0x03}, // Reset Bank 2 ANTIFUSE_EN -{pmic_i2c, 0xF2, 0x00}, // Reset Bank 2 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -//----------------------------------------------------------------------------------- -// BANK 3 -//----------------------------------------------------------------------------------- -{pmic_i2c, 0xF3, 0x00}, // Reset Bank 3 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xF3, 0x03}, // Set Bank 3 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xF3, 0x0B}, // Set Bank 3 ANTIFUSE_EN -{pmic_delay, 0, 10}, // Allow time for bank programming to complete -{pmic_i2c, 0xF3, 0x03}, // Reset Bank 3 ANTIFUSE_EN -{pmic_i2c, 0xF3, 0x00}, // Reset Bank 3 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -//----------------------------------------------------------------------------------- -// BANK 4 -//----------------------------------------------------------------------------------- -{pmic_i2c, 0xF4, 0x00}, // Reset Bank 4 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xF4, 0x03}, // Set Bank 4 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xF4, 0x0B}, // Set Bank 4 ANTIFUSE_EN -{pmic_delay, 0, 10}, // Allow time for bank programming to complete -{pmic_i2c, 0xF4, 0x03}, // Reset Bank 4 ANTIFUSE_EN -{pmic_i2c, 0xF4, 0x00}, // Reset Bank 4 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -//----------------------------------------------------------------------------------- -// BANK 5 -//----------------------------------------------------------------------------------- -{pmic_i2c, 0xF5, 0x00}, // Reset Bank 5 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xF5, 0x03}, // Set Bank 5 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xF5, 0x0B}, // Set Bank 5 ANTIFUSE_EN -{pmic_delay, 0, 10}, // Allow time for bank programming to complete -{pmic_i2c, 0xF5, 0x03}, // Reset Bank 5 ANTIFUSE_EN -{pmic_i2c, 0xF5, 0x00}, // Reset Bank 5 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -//----------------------------------------------------------------------------------- -// BANK 6 -//----------------------------------------------------------------------------------- -{pmic_i2c, 0xF6, 0x00}, // Reset Bank 6 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xF6, 0x03}, // Set Bank 6 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xF6, 0x0B}, // Set Bank 6 ANTIFUSE_EN -{pmic_delay, 0, 10}, // Allow time for bank programming to complete -{pmic_i2c, 0xF6, 0x03}, // Reset Bank 6 ANTIFUSE_EN -{pmic_i2c, 0xF6, 0x00}, // Reset Bank 6 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -//----------------------------------------------------------------------------------- -// BANK 7 -//----------------------------------------------------------------------------------- -{pmic_i2c, 0xF7, 0x00}, // Reset Bank 7 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xF7, 0x03}, // Set Bank 7 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xF7, 0x0B}, // Set Bank 7 ANTIFUSE_EN -{pmic_delay, 0, 10}, // Allow time for bank programming to complete -{pmic_i2c, 0xF7, 0x03}, // Reset Bank 7 ANTIFUSE_EN -{pmic_i2c, 0xF7, 0x00}, // Reset Bank 7 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -//----------------------------------------------------------------------------------- -// BANK 8 -//----------------------------------------------------------------------------------- -{pmic_i2c, 0xF8, 0x00}, // Reset Bank 8 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xF8, 0x03}, // Set Bank 8 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xF8, 0x0B}, // Set Bank 8 ANTIFUSE_EN -{pmic_delay, 0, 10}, // Allow time for bank programming to complete -{pmic_i2c, 0xF8, 0x03}, // Reset Bank 8 ANTIFUSE_EN -{pmic_i2c, 0xF8, 0x00}, // Reset Bank 8 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -//----------------------------------------------------------------------------------- -// BANK 9 -//----------------------------------------------------------------------------------- -{pmic_i2c, 0xF9, 0x00}, // Reset Bank 9 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xF9, 0x03}, // Set Bank 9 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xF9, 0x0B}, // Set Bank 9 ANTIFUSE_EN -{pmic_delay, 0, 10}, // Allow time for bank programming to complete -{pmic_i2c, 0xF9, 0x03}, // Reset Bank 9 ANTIFUSE_EN -{pmic_i2c, 0xF9, 0x00}, // Reset Bank 9 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -//----------------------------------------------------------------------------------- -// BANK 10 -//----------------------------------------------------------------------------------- -{pmic_i2c, 0xFA, 0x00}, // Reset Bank 10 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xFA, 0x03}, // Set Bank 10 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -{pmic_i2c, 0xFA, 0x0B}, // Set Bank 10 ANTIFUSE_EN -{pmic_delay, 0, 10}, // Allow time for bank programming to complete -{pmic_i2c, 0xFA, 0x03}, // Reset Bank 10 ANTIFUSE_EN -{pmic_i2c, 0xFA, 0x00}, // Reset Bank 10 ANTIFUSE_RW and ANTIFUSE_BYPASS bits -//----------------------------------------------------------------------------------- -{pmic_vpgm, 0, 0}, // Turn off 8V SWBST -{pmic_delay, 0, 500}, // Adds delay to allow VPGM to bleed off -{pmic_i2c, 0xD0, 0x00}, // Clear -{pmic_i2c, 0xD1, 0x00}, // Clear -{pmic_pwr, 0, 0}, // PWRON LOW to reload new OTP data -{pmic_delay, 0, 500}, -{pmic_pwr, 0, 1}, -#endif -}; \ No newline at end of file diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig deleted file mode 100644 index 133fc1a4dbd..00000000000 --- a/configs/apalis_imx6_defconfig +++ /dev/null @@ -1,75 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX6=y -CONFIG_SYS_TEXT_BASE=0x17800000 -CONFIG_SPL_GPIO_SUPPORT=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_TARGET_APALIS_IMX6=y -CONFIG_SPL_MMC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL=y -CONFIG_CMD_HDMIDETECT=y -CONFIG_ENV_VARS_UBOOT_CONFIG=y -CONFIG_NR_DRAM_BANKS=1 -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q" -CONFIG_BOOTDELAY=1 -# CONFIG_CONSOLE_MUX is not set -CONFIG_SUPPORT_RAW_INITRD=y -CONFIG_MISC_INIT_R=y -CONFIG_VERSION_VARIABLE=y -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SPL_DMA_SUPPORT=y -CONFIG_SPL_I2C_SUPPORT=y -CONFIG_SPL_USB_HOST_SUPPORT=y -CONFIG_SPL_USB_GADGET_SUPPORT=y -CONFIG_SPL_USB_SDP_SUPPORT=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="Apalis iMX6 # " -CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_ELF is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_XIMG is not set -CONFIG_CMD_ASKENV=y -CONFIG_CRC32_VERIFY=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_USB_SDP=y -CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_BMP=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_DWC_AHSATA=y -CONFIG_FSL_ESDHC=y -CONFIG_PHYLIB=y -CONFIG_PHY_MICREL=y -CONFIG_PHY_MICREL_KSZ90X1=y -CONFIG_MII=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_USB_KEYBOARD=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Toradex" -CONFIG_USB_GADGET_VENDOR_NUM=0x1b67 -CONFIG_USB_GADGET_PRODUCT_NUM=0x4000 -CONFIG_CI_UDC=y -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_USB_HOST_ETHER=y -CONFIG_VIDEO=y -CONFIG_FAT_WRITE=y -CONFIG_OF_LIBFDT=y -CONFIG_OF_LIBFDT_OVERLAY=y -# CONFIG_EFI_LOADER is not set diff --git a/configs/apalis_imx6_nospl_com_defconfig b/configs/apalis_imx6_nospl_com_defconfig deleted file mode 100644 index 6e72422e0eb..00000000000 --- a/configs/apalis_imx6_nospl_com_defconfig +++ /dev/null @@ -1,63 +0,0 @@ -CONFIG_ARM=y -CONFIG_SYS_THUMB_BUILD=y -CONFIG_ARCH_MX6=y -CONFIG_SYS_TEXT_BASE=0x17800000 -CONFIG_TARGET_APALIS_IMX6=y -CONFIG_CMD_HDMIDETECT=y -CONFIG_ENV_VARS_UBOOT_CONFIG=y -CONFIG_NR_DRAM_BANKS=1 -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/apalis_imx6/apalis_imx6q.cfg,MX6Q,DDR_MB=1024" -CONFIG_BOOTDELAY=1 -# CONFIG_CONSOLE_MUX is not set -CONFIG_SUPPORT_RAW_INITRD=y -CONFIG_MISC_INIT_R=y -CONFIG_VERSION_VARIABLE=y -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="Apalis iMX6 # " -CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_ELF is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_XIMG is not set -CONFIG_CMD_ASKENV=y -CONFIG_CRC32_VERIFY=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_BMP=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_DWC_AHSATA=y -CONFIG_FSL_ESDHC=y -CONFIG_PHYLIB=y -CONFIG_PHY_MICREL=y -CONFIG_PHY_MICREL_KSZ90X1=y -CONFIG_MII=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_USB_KEYBOARD=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Toradex" -CONFIG_USB_GADGET_VENDOR_NUM=0x1b67 -CONFIG_USB_GADGET_PRODUCT_NUM=0x4020 -CONFIG_CI_UDC=y -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_USB_HOST_ETHER=y -CONFIG_VIDEO=y -CONFIG_FAT_WRITE=y -CONFIG_OF_LIBFDT=y -# CONFIG_EFI_LOADER is not set diff --git a/configs/apalis_imx6_nospl_it_defconfig b/configs/apalis_imx6_nospl_it_defconfig deleted file mode 100644 index bc04aabbbc7..00000000000 --- a/configs/apalis_imx6_nospl_it_defconfig +++ /dev/null @@ -1,63 +0,0 @@ -CONFIG_ARM=y -CONFIG_SYS_THUMB_BUILD=y -CONFIG_ARCH_MX6=y -CONFIG_SYS_TEXT_BASE=0x17800000 -CONFIG_TARGET_APALIS_IMX6=y -CONFIG_CMD_HDMIDETECT=y -CONFIG_ENV_VARS_UBOOT_CONFIG=y -CONFIG_NR_DRAM_BANKS=1 -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/apalis_imx6/apalis_imx6q.cfg,MX6Q,DDR_MB=2048" -CONFIG_BOOTDELAY=1 -# CONFIG_CONSOLE_MUX is not set -CONFIG_SUPPORT_RAW_INITRD=y -CONFIG_MISC_INIT_R=y -CONFIG_VERSION_VARIABLE=y -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="Apalis iMX6 # " -CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_ELF is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_XIMG is not set -CONFIG_CMD_ASKENV=y -CONFIG_CRC32_VERIFY=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_BMP=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_DWC_AHSATA=y -CONFIG_FSL_ESDHC=y -CONFIG_PHYLIB=y -CONFIG_PHY_MICREL=y -CONFIG_PHY_MICREL_KSZ90X1=y -CONFIG_MII=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_USB_KEYBOARD=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Toradex" -CONFIG_USB_GADGET_VENDOR_NUM=0x1b67 -CONFIG_USB_GADGET_PRODUCT_NUM=0x4020 -CONFIG_CI_UDC=y -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_USB_HOST_ETHER=y -CONFIG_VIDEO=y -CONFIG_FAT_WRITE=y -CONFIG_OF_LIBFDT=y -# CONFIG_EFI_LOADER is not set diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h deleted file mode 100644 index 135b3c9584d..00000000000 --- a/include/configs/apalis_imx6.h +++ /dev/null @@ -1,277 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2013-2015 Toradex, Inc. - * - * Configuration settings for the Toradex Apalis iMX6 - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include "mx6_common.h" - -#undef CONFIG_DISPLAY_BOARDINFO - -#define CONFIG_MACH_TYPE 4886 - -#include <asm/arch/imx-regs.h> -#include <asm/mach-imx/gpio.h> - -#ifdef CONFIG_SPL -#include "imx6_spl.h" -#endif - -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_REVISION_TAG -#define CONFIG_SERIAL_TAG - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024) - -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART1_BASE - -/* I2C Configs */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ -#define CONFIG_SYS_I2C_SPEED 100000 - -/* OCOTP Configs */ -#ifdef CONFIG_CMD_FUSE -#define CONFIG_MXC_OCOTP -#endif - -/* MMC Configs */ -#define CONFIG_FSL_USDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_FSL_USDHC_NUM 3 - -#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ - -/* - * SATA Configs - */ -#ifdef CONFIG_CMD_SATA -#define CONFIG_SYS_SATA_MAX_DEVICE 1 -#define CONFIG_DWC_AHSATA_PORT_ID 0 -#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR -#define CONFIG_LBA48 -#endif - -/* Network */ -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_MXC_PHYADDR 6 -#define CONFIG_IP_DEFRAG -#define CONFIG_TFTP_BLOCKSIZE 4096 -#define CONFIG_TFTP_TSIZE - -/* USB Configs */ -/* Host */ -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 -/* Client */ -#define CONFIG_USBD_HS - -#define CONFIG_USB_GADGET_MASS_STORAGE -/* USB DFU */ -#define CONFIG_DFU_MMC - -/* Miscellaneous commands */ - -/* Framebuffer and LCD */ -#define CONFIG_VIDEO_IPUV3 -#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_BMP_16BPP -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_BMP_LOGO -#define CONFIG_CONSOLE_MUX -#define CONFIG_IMX_HDMI -#define CONFIG_IMX_VIDEO_SKIP - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -/* Command definition */ -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_FLASH - -#undef CONFIG_IPADDR -#define CONFIG_IPADDR 192.168.10.2 -#define CONFIG_NETMASK 255.255.255.0 -#undef CONFIG_SERVERIP -#define CONFIG_SERVERIP 192.168.10.1 - -#define CONFIG_LOADADDR 0x12000000 - -#ifdef CONFIG_CMD_SATA -#define CONFIG_DRIVE_SATA "sata " -#else -#define CONFIG_DRIVE_SATA -#endif - -#ifdef CONFIG_CMD_MMC -#define CONFIG_DRIVE_MMC "mmc " -#else -#define CONFIG_DRIVE_MMC -#endif - -#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC - -#define DFU_ALT_EMMC_INFO \ - "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \ - "boot part 0 1;" \ - "rootfs part 0 2;" \ - "uImage fat 0 1;" \ - "imx6q-colibri-eval-v3.dtb fat 0 1;" \ - "imx6q-colibri-cam-eval-v3.dtb fat 0 1" - -#define EMMC_BOOTCMD \ - "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \ - "rootwait\0" \ - "emmcboot=run setup; " \ - "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \ - "${vidargs}; echo Booting from internal eMMC chip...; " \ - "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \ - "${boot_file} && run fdt_fixup && " \ - "bootm ${kernel_addr_r} ${dtbparam}\0" \ - "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \ - "${fdt_file} && setenv dtbparam " - ${fdt_addr_r}" && true\0" - -#define MEM_LAYOUT_ENV_SETTINGS \ - "bootm_size=0x20000000\0" \ - "fdt_addr_r=0x12000000\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ - "kernel_addr_r=0x11000000\0" \ - "ramdisk_addr_r=0x12100000\0" - -#define NFS_BOOTCMD \ - "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \ - "nfsboot=run setup; " \ - "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \ - "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \ - "run nfsdtbload; dhcp ${kernel_addr_r} " \ - "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \ - "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \ - "&& setenv dtbparam " - ${fdt_addr_r}" && true\0" - -#define SD_BOOTCMD \ - "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \ - "rootwait\0" \ - "sdboot=run setup; " \ - "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \ - "${vidargs}; echo Booting from SD card; " \ - "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \ - "${boot_file} && run fdt_fixup && " \ - "bootm ${kernel_addr_r} ${dtbparam}\0" \ - "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \ - "${fdt_file} && setenv dtbparam " - ${fdt_addr_r}" && true\0" - -#define USB_BOOTCMD \ - "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \ - "rootwait\0" \ - "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \ - "${usbargs} ${vidargs}; echo Booting from USB stick...; " \ - "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \ - "${boot_file} && run fdt_fixup && " \ - "bootm ${kernel_addr_r} ${dtbparam}\0" \ - "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \ - "${fdt_file} && setenv dtbparam " - ${fdt_addr_r}" && true\0" - -#ifndef CONFIG_TDX_APALIS_IMX6_V1_0 -#define FDT_FILE "imx6q-apalis-eval.dtb" -#define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb" -#else -#define FDT_FILE "imx6q-apalis_v1_0-eval.dtb" -#endif -#define CONFIG_EXTRA_ENV_SETTINGS \ - "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \ - "run nfsboot ; echo ; echo nfsboot failed ; " \ - "usb start ;" \ - "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ - "boot_file=uImage\0" \ - "console=ttymxc0\0" \ - "defargs=enable_wait_mode=off vmalloc=400M\0" \ - "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \ - EMMC_BOOTCMD \ - "fdt_file=" FDT_FILE "\0" \ - "fdt_fixup=;\0" \ - MEM_LAYOUT_ENV_SETTINGS \ - NFS_BOOTCMD \ - SD_BOOTCMD \ - "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ - "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \ - "flash_eth.img && source ${loadaddr}\0" \ - "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \ - "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \ - "source ${loadaddr}\0" \ - "setup=setenv setupargs fec_mac=${ethaddr} " \ - "consoleblank=0 no_console_suspend=1 console=tty1 " \ - "console=${console},${baudrate}n8\0 " \ - "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \ - "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \ - "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \ - "source ${loadaddr}\0" \ - "splashpos=m,m\0" \ - "vidargs=mxc_hdmi.only_cea=1 " \ - "video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \ - "video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \ - "fbmem=32M\0 " - -/* Miscellaneous configurable options */ -#undef CONFIG_SYS_CBSIZE -#define CONFIG_SYS_CBSIZE 1024 -#undef CONFIG_SYS_MAXARGS -#define CONFIG_SYS_MAXARGS 48 - -#define CONFIG_SYS_MEMTEST_START 0x10000000 -#define CONFIG_SYS_MEMTEST_END 0x10010000 -#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -/* Physical Memory Map */ -#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* environment organization */ - -#define CONFIG_ENV_SIZE (8 * 1024) - -#if defined(CONFIG_ENV_IS_IN_MMC) -/* Environment in eMMC, before config block at the end of 1st "boot sector" */ -#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \ - CONFIG_TDX_CFG_BLOCK_OFFSET) -#define CONFIG_SYS_MMC_ENV_DEV 0 -#define CONFIG_SYS_MMC_ENV_PART 1 -#endif - -#define CONFIG_OF_SYSTEM_SETUP - -#define CONFIG_CMD_TIME - -#endif /* __CONFIG_H */