From: Marcel Ziswiler marcel.ziswiler@toradex.com
- enable bootcount command - integrate bootcount using SNVS_LP general purpose register LPGPR0 - enable link-time optimisation - explicitly set a boot delay of one second - enable CRC32 and MD5 - enable command for low-level access to data in a partition - enable time commands - enable PMIC commands - improve ETHPRIME configuration - enable eMMC HS400 functionality - enable fixed PHY and MDIO driver model - remove stale PFUZE100 PMIC driver - enable thermal management unit driver - enable more USB host functionality - enable hexdump
Signed-off-by: Marcel Ziswiler marcel.ziswiler@toradex.com
---
Changes in v3: - Drop SNVS_LP general purpose register LPGPR0 based bootcount integration in favour of using the environment based one as that is what our update system uses.
configs/verdin-imx8mm_defconfig | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/configs/verdin-imx8mm_defconfig b/configs/verdin-imx8mm_defconfig index 9b9b684ccbc..25cd59b185e 100644 --- a/configs/verdin-imx8mm_defconfig +++ b/configs/verdin-imx8mm_defconfig @@ -15,10 +15,7 @@ CONFIG_SYS_PROMPT="Verdin iMX8MM # " CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y -CONFIG_BOOTCOUNT_BOOTLIMIT=3 -CONFIG_SYS_BOOTCOUNT_ADDR=0x30370090 CONFIG_SPL=y -CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y CONFIG_SYS_LOAD_ADDR=0x48200000 CONFIG_SYS_MEMTEST_START=0x40000000 CONFIG_SYS_MEMTEST_END=0x80000000 @@ -92,7 +89,7 @@ CONFIG_IP_DEFRAG=y CONFIG_TFTP_BLOCKSIZE=4096 CONFIG_SPL_DM=y CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_SYS_BOOTCOUNT_MAGIC=0xB0C40000 +CONFIG_BOOTCOUNT_ENV=y CONFIG_SPL_CLK_COMPOSITE_CCF=y CONFIG_CLK_COMPOSITE_CCF=y CONFIG_SPL_CLK_IMX8MM=y