Miscellaneous fixes made when developing the lwIP series [1]. They are posted separately since they make sense on their own. Subsequent versions of the lwIP series will contain a squashed version of this one.
[1] http://patchwork.ozlabs.org/project/uboot/list/?series=420712&state=%2A&...
Changes in v4:
- "net: fm: call dtsec_init_phy() only when it is defined" Use '#if CONFIG_IS_ENABLED()' not 'if IS_ENABLED()' which would still cause an error. - Drop "Makefile: detect HOST_ARCH properly when CROSS_COMPILE is multi-word". The first use case mentioned in the patch description (cross-compiling sandbox) is not valid, and the second one (buildman) is actually addressed in another patch ("buildman/toolchain.py: do not set CROSS_COMPILE for sandbox"). - Rebased onto next
Changes in v3:
- Apply R-b tags from Peter R. - Rework "buildman/toolchain.py: set CROSS_COMPILE only if self.cross is set". Subject changed to "buildman/toolchain.py: do not set CROSS_COMPILE for sandbox", GetEnvArgs function fixed as well, and test cases added. (Simon G.)
Changes in v2:
- Rebased onto master - "flash: prefix error codes with FL_" Update drivers/mtd/altera_qspi.c too. This was mentioned by Simon G. in my lwIP v9 thread [1]. Tom R./Ilias A./Peter R.: I kept your R-b tags, please shout if it's not OK. - "net: fm: call dtsec_init_phy() only when it is defined" Address Simon G.'s comments: update condition (parentheses, CONFIG_BITBANGMII, if instead of #if). Peter R: I dropped your R-b since the code changed significantly. - New patches: "common: update: UPDATE_COMMON implies CMD_TFTPBOOT" "cmd: pxe: CMD_PXE implies CMD_TFTPBOOT" "buildman/toolchain.py: set CROSS_COMPILE only if self.cross is set"
[1] https://lists.denx.de/pipermail/u-boot/2024-August/563497.html
Jerome Forissier (15): buildman/toolchain.py: do not set CROSS_COMPILE for sandbox flash: prefix error codes with FL_ at91: rename mem_init() to at91_mem_init() arm: omap2: add missing #include <netdev.h> net: fm: call dtsec_init_phy() only when it is defined net: wget: removed unused function wget_success() net: phy: ncsi: depend on NET net: ftgmac100: depend on NET net: wget: allow EFI boot net: fec_mxc_init(): do not ignore return status of fec_open() test/py: net_boot: fix comment test/py: test_efi_loader: add missing dependency on cmd_tftpboot test/py: test_efi_loader: add HTTP (wget) test for the EFI loader common: update: UPDATE_COMMON implies CMD_TFTPBOOT cmd: pxe: CMD_PXE implies CMD_TFTPBOOT
arch/arm/mach-at91/include/mach/at91_common.h | 2 +- arch/arm/mach-at91/spl_at91.c | 2 +- arch/arm/mach-at91/spl_atmel.c | 2 +- arch/arm/mach-omap2/omap3/emac.c | 1 + .../atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 2 +- board/atmel/at91sam9n12ek/at91sam9n12ek.c | 2 +- board/atmel/at91sam9x5ek/at91sam9x5ek.c | 2 +- .../atmel/sama5d27_som1_ek/sama5d27_som1_ek.c | 2 +- .../sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c | 2 +- board/atmel/sama5d2_icp/sama5d2_icp.c | 2 +- .../atmel/sama5d2_xplained/sama5d2_xplained.c | 2 +- .../atmel/sama5d3_xplained/sama5d3_xplained.c | 2 +- board/atmel/sama5d3xek/sama5d3xek.c | 2 +- .../atmel/sama5d4_xplained/sama5d4_xplained.c | 2 +- board/atmel/sama5d4ek/sama5d4ek.c | 2 +- board/cobra5272/flash.c | 26 ++++---- .../conclusive/kstr-sama5d27/kstr-sama5d27.c | 2 +- board/freescale/m5253demo/flash.c | 6 +- board/gardena/smart-gateway-at91sam/spl.c | 2 +- board/siemens/corvus/board.c | 2 +- board/siemens/smartweb/smartweb.c | 2 +- board/siemens/taurus/taurus.c | 2 +- cmd/Kconfig | 1 + common/Kconfig | 1 + common/flash.c | 44 ++++++------- drivers/mtd/altera_qspi.c | 4 +- drivers/mtd/cfi_flash.c | 36 +++++------ drivers/net/Kconfig | 1 + drivers/net/fec_mxc.c | 3 +- drivers/net/fm/eth.c | 6 +- drivers/net/phy/Kconfig | 1 + include/flash.h | 20 +++--- net/wget.c | 11 ++-- test/py/tests/test_efi_loader.py | 62 ++++++++++++++----- test/py/tests/test_net_boot.py | 2 +- tools/buildman/test.py | 46 ++++++++++++++ tools/buildman/toolchain.py | 6 +- 37 files changed, 200 insertions(+), 115 deletions(-)