Sort the nodes in rk3288-tinker u-boot.dtsi files in alphabetical order.
This has no intended change to board DTs and only rearrange nodes in preparation for future changes.
Signed-off-by: Jonas Karlman jonas@kwiboo.se --- arch/arm/dts/rk3288-tinker-s-u-boot.dtsi | 8 ++--- arch/arm/dts/rk3288-tinker-u-boot.dtsi | 44 ++++++++++++------------ 2 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi b/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi index b4c5483146ab..a782f2f9804a 100644 --- a/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi +++ b/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi @@ -17,18 +17,18 @@ bootph-pre-ram; };
-&emmc_clk { +&emmc_bus8 { bootph-pre-ram; };
-&emmc_cmd { +&emmc_clk { bootph-pre-ram; };
-&emmc_pwr { +&emmc_cmd { bootph-pre-ram; };
-&emmc_bus8 { +&emmc_pwr { bootph-pre-ram; }; diff --git a/arch/arm/dts/rk3288-tinker-u-boot.dtsi b/arch/arm/dts/rk3288-tinker-u-boot.dtsi index 0cf1b696d168..032dac221c24 100644 --- a/arch/arm/dts/rk3288-tinker-u-boot.dtsi +++ b/arch/arm/dts/rk3288-tinker-u-boot.dtsi @@ -17,6 +17,10 @@ rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 0>; };
+&gpio7 { + bootph-pre-ram; +}; + &i2c2 { m24c08@50 { compatible = "at,24c08", "i2c-eeprom"; @@ -24,31 +28,15 @@ }; };
-&pinctrl { - bootph-all; -}; - -&uart2 { - bootph-all; -}; - -&uart2_xfer { - bootph-all; -}; - -&sdmmc { - bootph-pre-ram; -}; - -&gpio7 { +&pcfg_pull_none { bootph-pre-ram; };
-&vcc_sd { +&pcfg_pull_none_drv_8ma { bootph-pre-ram; };
-&pcfg_pull_none_drv_8ma { +&pcfg_pull_up { bootph-pre-ram; };
@@ -56,11 +44,11 @@ bootph-pre-ram; };
-&pcfg_pull_none { - bootph-pre-ram; +&pinctrl { + bootph-all; };
-&pcfg_pull_up { +&sdmmc { bootph-pre-ram; };
@@ -83,3 +71,15 @@ &sdmmc_pwr { bootph-pre-ram; }; + +&uart2 { + bootph-all; +}; + +&uart2_xfer { + bootph-all; +}; + +&vcc_sd { + bootph-pre-ram; +};