
On Saturday 18 December 2021 10:16:25 Stefan Roese wrote:
Hi Marek, Hi Pali,
working on a "next" branch, I noticed that this patch series fails on some non-MVEBU boards:
Hello! This patch series does not apply on master branch. I rebased patches on master and hopefully also fixed this mentioned issue.
To ensure that there are no other compile errors, I started github CI: https://github.com/u-boot/u-boot/pull/106
After tests pass I will send v4 to the list.
[stefan@ryzen u-boot-marvell (next)]$ make da850evm_nand_defconfig # # configuration written to .config # [stefan@ryzen u-boot-marvell (next)]$ make -s -j20 common/spl/spl_nand.c: In function 'spl_nand_load_image': common/spl/spl_nand.c:175:48: warning: passing argument 2 of 'spl_nand_load_element' makes pointer from integer without a cast [-Wint-conversion] 175 | err = spl_nand_load_element(spl_image, spl_nand_get_uboot_raw_page(), | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | | | uint32_t {aka unsigned int} common/spl/spl_nand.c:68:58: note: expected 'struct spl_boot_device *' but argument is of type 'uint32_t' {aka 'unsigned int'} 68 | struct spl_boot_device *bootdev, | ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~ common/spl/spl_nand.c:176:37: warning: passing argument 3 of 'spl_nand_load_element' makes integer from pointer without a cast [-Wint-conversion] 176 | header); | ^~~~~~ | | | struct image_header * common/spl/spl_nand.c:69:38: note: expected 'int' but argument is of type 'struct image_header *' 69 | int offset, struct image_header *header) | ~~~~^~~~~~ common/spl/spl_nand.c:175:15: error: too few arguments to function 'spl_nand_load_element' 175 | err = spl_nand_load_element(spl_image, spl_nand_get_uboot_raw_page(), | ^~~~~~~~~~~~~~~~~~~~~ common/spl/spl_nand.c:67:12: note: declared here 67 | static int spl_nand_load_element(struct spl_image_info *spl_image, | ^~~~~~~~~~~~~~~~~~~~~ make[2]: *** [scripts/Makefile.build:253: spl/common/spl/spl_nand.o] Error 1 make[1]: *** [scripts/Makefile.spl:515: spl/common/spl] Error 2 make[1]: *** Waiting for unfinished jobs....
I'm droppping this series from my "next" branch for now.
Thanks, Stefan
On 12/14/21 14:22, Marek Behún wrote:
From: Marek Behún marek.behun@nic.cz
Hello Stefan,
this is v3 of series that adds more checks for kwbimage validity and consistency to SPL, mainly checking image data checksum.
Changes since v2:
- changed the error message in patch 6 according to Pali's suggestion
- added R-B tags
Changes since v1:
- updated error messages as requested by Stefan
- fixed checkpatch warnings for uintN_t types (converted to preferred uN)
- added more checkpatch fixes
Marek
Marek Behún (4): arm: mvebu: spl: Print srcaddr in error message arm: mvebu: spl: Use preferred types u8/u16/u32 instead of uintN_t arm: mvebu: spl: Use IS_ENABLED() instead of #ifdef where possible arm: mvebu: spl: Fix 100 column exceeds
Pali Rohár (5): arm: mvebu: Check that kwbimage offset and blocksize are valid SPL: Add struct spl_boot_device parameter into spl_parse_board_header() arm: mvebu: Check that kwbimage blockid matches boot mode SPL: Add support for checking board / BootROM specific image types arm: mvebu: Check for kwbimage data checksum
arch/arm/mach-mvebu/spl.c | 153 +++++++++++++++++++--------- arch/arm/mach-sunxi/spl_spi_sunxi.c | 2 +- common/spl/spl.c | 13 ++- common/spl/spl_ext.c | 9 +- common/spl/spl_fat.c | 11 +- common/spl/spl_legacy.c | 3 +- common/spl/spl_mmc.c | 43 +++++--- common/spl/spl_nand.c | 5 +- common/spl/spl_net.c | 2 +- common/spl/spl_nor.c | 4 +- common/spl/spl_onenand.c | 2 +- common/spl/spl_ram.c | 2 +- common/spl/spl_sata.c | 9 +- common/spl/spl_sdp.c | 2 +- common/spl/spl_spi.c | 9 +- common/spl/spl_ubi.c | 4 +- common/spl/spl_usb.c | 4 +- common/spl/spl_xip.c | 4 +- common/spl/spl_ymodem.c | 4 +- drivers/usb/gadget/f_sdp.c | 12 ++- include/sdp.h | 3 +- include/spl.h | 7 ++ 22 files changed, 201 insertions(+), 106 deletions(-)
Viele Grüße, Stefan Roese
-- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr@denx.de