Hi Marek, Did you get a chance to review this?
Thanks Venkatesh
-----Original Message----- From: Michal Simek monstr@monstr.eu Sent: Monday, July 15, 2024 5:24 PM To: Abbarapu, Venkatesh venkatesh.abbarapu@amd.com; Tom Rini trini@konsulko.com; Marek Vašut marex@denx.de; fabrice.gasnier@foss.st.com Cc: u-boot@lists.denx.de; Simek, Michal michal.simek@amd.com; git (AMD-Xilinx) git@amd.com Subject: Re: [PATCH 0/7] Add the USB5744 hub driver as per new DT binding
Hi Tom, Marek and Fabrice,
st 5. 6. 2024 v 12:02 odesílatel Venkatesh Yadav Abbarapu venkatesh.abbarapu@amd.com napsal:
Add the usb5744/usb2744 hub driver which does the reset gpio toggling and the i2c initialization sequence.
Tested the USB5744/USB2744 usb hub for usb0, usb1 with the DT nodes on KR260 board.
Venkatesh Yadav Abbarapu (7): usb: onboard-hub: Add reset-gpio support usb: onboard-hub: Fix the return values of regulator APIs usb: onboard-hub: add support for Microchip USB5744 usb: onboard-hub: Add i2c initialization for usb5744 hub usb: onboard-hub: Bail out if peer hub is already probed configs: zynqmp_kria: Enable the USB onboard hub arm64: zynqmp: Update the usb5744 hub node as per binding
arch/arm/dts/zynqmp-sck-kr-g-revA.dtso | 48 +++++++ arch/arm/dts/zynqmp-sck-kr-g-revB.dtso | 48 +++++++ arch/arm/dts/zynqmp-sck-kv-g-revA.dtso | 18 +++ arch/arm/dts/zynqmp-sck-kv-g-revB.dtso | 25 +++- common/usb_onboard_hub.c | 176 +++++++++++++++++++++++-- configs/xilinx_zynqmp_kria_defconfig | 1 + 6 files changed, 304 insertions(+), 12 deletions(-)
-- 2.17.1
Can someone please take a look at this patchset?
I am fine with 6/7 and 7/7. Acked-by: Michal Simek michal.simek@amd.com
Thanks, Michal
-- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Xilinx Microblaze Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs