Use mmc_pwrseq instead of rockchip_mmc_pwrseq.
Signed-off-by: Jaehoon Chung jh80.chung@samsung.com --- drivers/mmc/rockchip_dw_mmc.c | 41 +++-------------------------------- 1 file changed, 3 insertions(+), 38 deletions(-)
diff --git a/drivers/mmc/rockchip_dw_mmc.c b/drivers/mmc/rockchip_dw_mmc.c index 1be3c1741fd4..0664f6e5aef4 100644 --- a/drivers/mmc/rockchip_dw_mmc.c +++ b/drivers/mmc/rockchip_dw_mmc.c @@ -136,12 +136,11 @@ static int rockchip_dwmmc_probe(struct udevice *dev)
host->fifo_mode = priv->fifo_mode;
-#ifdef CONFIG_PWRSEQ +#ifdef CONFIG_MMC_PWRSEQ /* Enable power if needed */ - ret = uclass_get_device_by_phandle(UCLASS_PWRSEQ, dev, "mmc-pwrseq", - &pwr_dev); + ret = mmc_pwrseq_get_power(dev, &plat->cfg); if (!ret) { - ret = pwrseq_set_power(pwr_dev, true); + ret = pwrseq_set_power(&plat->cfg->pwr_dev, true); if (ret) return ret; } @@ -182,37 +181,3 @@ U_BOOT_DRIVER(rockchip_rk3288_dw_mshc) = {
DM_DRIVER_ALIAS(rockchip_rk3288_dw_mshc, rockchip_rk3328_dw_mshc) DM_DRIVER_ALIAS(rockchip_rk3288_dw_mshc, rockchip_rk3368_dw_mshc) - -#ifdef CONFIG_PWRSEQ -static int rockchip_dwmmc_pwrseq_set_power(struct udevice *dev, bool enable) -{ - struct gpio_desc reset; - int ret; - - ret = gpio_request_by_name(dev, "reset-gpios", 0, &reset, GPIOD_IS_OUT); - if (ret) - return ret; - dm_gpio_set_value(&reset, 1); - udelay(1); - dm_gpio_set_value(&reset, 0); - udelay(200); - - return 0; -} - -static const struct pwrseq_ops rockchip_dwmmc_pwrseq_ops = { - .set_power = rockchip_dwmmc_pwrseq_set_power, -}; - -static const struct udevice_id rockchip_dwmmc_pwrseq_ids[] = { - { .compatible = "mmc-pwrseq-emmc" }, - { } -}; - -U_BOOT_DRIVER(rockchip_dwmmc_pwrseq_drv) = { - .name = "mmc_pwrseq_emmc", - .id = UCLASS_PWRSEQ, - .of_match = rockchip_dwmmc_pwrseq_ids, - .ops = &rockchip_dwmmc_pwrseq_ops, -}; -#endif