On Tue, Apr 12, 2022 at 12:33 AM Peng Fan (OSS) peng.fan@oss.nxp.com wrote:
From: Peng Fan peng.fan@nxp.com
Enable CONFIG_DM_SERIAL. uart2 and its pinmux was already marked with u-boot,dm-spl.
File generated with make savedefconfig
Same comment about mixing savedefconfig changes into the same patch applies.
You missed your Signed-off-by line.
board/freescale/imx8mn_evk/spl.c | 12 ++---------- configs/imx8mn_ddr4_evk_defconfig | 4 ++-- configs/imx8mn_evk_defconfig | 4 ++-- 3 files changed, 6 insertions(+), 14 deletions(-)
diff --git a/board/freescale/imx8mn_evk/spl.c b/board/freescale/imx8mn_evk/spl.c index 03f2a56e805..8708c93fa34 100644 --- a/board/freescale/imx8mn_evk/spl.c +++ b/board/freescale/imx8mn_evk/spl.c @@ -110,14 +110,8 @@ int board_fit_config_name_match(const char *name) } #endif
-#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1) #define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
-static iomux_v3_cfg_t const uart_pads[] = {
IMX8MN_PAD_UART2_RXD__UART2_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),IMX8MN_PAD_UART2_TXD__UART2_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),-};
static iomux_v3_cfg_t const wdog_pads[] = { IMX8MN_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), }; @@ -130,8 +124,6 @@ int board_early_init_f(void)
set_wdog_reset(wdog);
imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));return 0;}
@@ -147,8 +139,6 @@ void board_init_f(ulong dummy)
timer_init();
preloader_console_init();/* Clear the BSS. */ memset(__bss_start, 0, __bss_end - __bss_start);@@ -158,6 +148,8 @@ void board_init_f(ulong dummy) hang(); }
preloader_console_init();
This preloader_console_init() move deserves a comment in the commit log. Please explain.