On 2024/4/17 19:21, lukasz.czechowski@thaumatec.com wrote:
From: Lukasz Czechowski lukasz.czechowski@thaumatec.com
Display TPL init information message only when TPL_BANNER_PRINT configuration entry is set. This allows to disable information message in case logs on UART are unwanted. Update parent ifdef condition to check also CONFIG_TPL_SERIAL to match logic of the non-PX30 TPL implementation.
Signed-off-by: Lukasz Czechowski lukasz.czechowski@thaumatec.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
Changes for v2:
- Updated parent ifdef condition
Changes for v3:
- Updated commit title
arch/arm/mach-rockchip/px30-board-tpl.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-rockchip/px30-board-tpl.c b/arch/arm/mach-rockchip/px30-board-tpl.c index 637a5e1b18..db368a7b8c 100644 --- a/arch/arm/mach-rockchip/px30-board-tpl.c +++ b/arch/arm/mach-rockchip/px30-board-tpl.c @@ -36,7 +36,7 @@ void board_init_f(ulong dummy) { int ret;
-#ifdef CONFIG_DEBUG_UART +#if defined(CONFIG_DEBUG_UART) && defined(CONFIG_TPL_SERIAL) debug_uart_init(); /* * Debug UART can be used from here if required: @@ -46,7 +46,9 @@ void board_init_f(ulong dummy) * printhex8(0x1234); * printascii("string"); */ +#if CONFIG_TPL_BANNER_PRINT printascii("U-Boot TPL board init\n"); +#endif #endif
secure_timer_init();