I will carry this work-around until it is cared in the kernel. This looks up the AIDET node and sets up a register to handle active low interrupt signals.
Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com ---
arch/arm/mach-uniphier/board_early_init_f.c | 39 +++++++++++++++++++++++++++ arch/arm/mach-uniphier/pinctrl/pinctrl-ld20.c | 5 ++++ 2 files changed, 44 insertions(+)
diff --git a/arch/arm/mach-uniphier/board_early_init_f.c b/arch/arm/mach-uniphier/board_early_init_f.c index f853701..d35d38d 100644 --- a/arch/arm/mach-uniphier/board_early_init_f.c +++ b/arch/arm/mach-uniphier/board_early_init_f.c @@ -4,10 +4,47 @@ * SPDX-License-Identifier: GPL-2.0+ */
+#include <common.h> +#include <libfdt.h> +#include <linux/io.h> + #include "init.h" #include "micro-support-card.h" #include "soc-info.h"
+DECLARE_GLOBAL_DATA_PTR; + +static void uniphier_setup_xirq(void) +{ + const void *fdt = gd->fdt_blob; + int soc_node, aidet_node; + const u32 *val; + unsigned long aidet_base; + u32 tmp; + + soc_node = fdt_path_offset(fdt, "/soc"); + if (soc_node < 0) + return; + + aidet_node = fdt_subnode_offset_namelen(fdt, soc_node, "aidet", 5); + if (aidet_node < 0) + return; + + val = fdt_getprop(fdt, aidet_node, "reg", NULL); + if (!val) + return; + + aidet_base = fdt32_to_cpu(*val); + + tmp = readl(aidet_base + 8); /* AIDET DETCONFR2 */ + tmp |= 0x00ff0000; /* Set XIRQ0-7 low active */ + writel(tmp, aidet_base + 8); + + tmp = readl(0x55000090); /* IRQCTL */ + tmp |= 0x000000ff; + writel(tmp, 0x55000090); +} + int board_early_init_f(void) { led_puts("U0"); @@ -81,6 +118,8 @@ int board_early_init_f(void) break; }
+ uniphier_setup_xirq(); + led_puts("U2");
return 0; diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ld20.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ld20.c index 6066b16..645b901 100644 --- a/arch/arm/mach-uniphier/pinctrl/pinctrl-ld20.c +++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ld20.c @@ -43,4 +43,9 @@ void uniphier_ld20_pin_init(void) sg_set_pinsel(53, 0, 8, 4); /* USB3OD -> USB3OD */ sg_set_iectrl_range(46, 53); #endif + + sg_set_pinsel(149, 14, 8, 4); /* XIRQ0 -> XIRQ0 */ + sg_set_iectrl(149); + sg_set_pinsel(153, 14, 8, 4); /* XIRQ4 -> XIRQ4 */ + sg_set_iectrl(153); }