This converts the clint driver from the riscv-specific interface to be a DM-based UCLASS_TIMER driver. We also need to re-add the initialization for IPI back into the SPL code. This was previously implicitly done when the timer was initialized. In addition, the SiFive DDR driver previously implicitly depended on the CLINT to select REGMAP.
Unlike Andes's PLMT/PLIC (which AFAIK never have anything pass it a dtb), the SiFive CLINT is part of the device tree passed in by qemu. This device tree doesn't have a clocks or clock-frequency property on clint, so we need to fall back on the timebase-frequency property. Perhaps in the future we can get a clock-frequency property added to the qemu dtb.
Unlike with the Andes PLMT, the Sifive CLINT is also an IPI controller. RISCV_SYSCON_CLINT is retained for this purpose.
Signed-off-by: Sean Anderson seanga2@gmail.com --- This patch builds but has only been tested on the K210 and QEMU. It has NOT been tested on a HiFive.
Changes in v3: - Don't initialize the IPI in spl_invoke_opensbi. Further testing has revealed it to be unnecessary.
arch/riscv/Kconfig | 4 -- arch/riscv/lib/sifive_clint.c | 87 +++++++++++++++++++++++------------ drivers/ram/sifive/Kconfig | 2 + 3 files changed, 59 insertions(+), 34 deletions(-)
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index d9155b9bab..aaa3b833a5 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -155,10 +155,6 @@ config 64BIT config SIFIVE_CLINT bool depends on RISCV_MMODE || SPL_RISCV_MMODE - select REGMAP - select SYSCON - select SPL_REGMAP if SPL - select SPL_SYSCON if SPL help The SiFive CLINT block holds memory-mapped control and status registers associated with software and timer interrupts. diff --git a/arch/riscv/lib/sifive_clint.c b/arch/riscv/lib/sifive_clint.c index b9a2c649cc..3345a17ad2 100644 --- a/arch/riscv/lib/sifive_clint.c +++ b/arch/riscv/lib/sifive_clint.c @@ -8,9 +8,9 @@ */
#include <common.h> +#include <clk.h> #include <dm.h> -#include <regmap.h> -#include <syscon.h> +#include <timer.h> #include <asm/io.h> #include <asm/syscon.h> #include <linux/err.h> @@ -24,35 +24,19 @@
DECLARE_GLOBAL_DATA_PTR;
-int riscv_get_time(u64 *time) -{ - /* ensure timer register base has a sane value */ - riscv_init_ipi(); - - *time = readq((void __iomem *)MTIME_REG(gd->arch.clint)); - - return 0; -} - -int riscv_set_timecmp(int hart, u64 cmp) -{ - /* ensure timer register base has a sane value */ - riscv_init_ipi(); - - writeq(cmp, (void __iomem *)MTIMECMP_REG(gd->arch.clint, hart)); - - return 0; -} - int riscv_init_ipi(void) { - if (!gd->arch.clint) { - long *ret = syscon_get_first_range(RISCV_SYSCON_CLINT); + int ret; + struct udevice *dev;
- if (IS_ERR(ret)) - return PTR_ERR(ret); - gd->arch.clint = ret; - } + ret = uclass_get_device_by_driver(UCLASS_TIMER, + DM_GET_DRIVER(sifive_clint), &dev); + if (ret) + return ret; + + gd->arch.clint = dev_read_addr_ptr(dev); + if (!gd->arch.clint) + return -EINVAL;
return 0; } @@ -78,14 +62,57 @@ int riscv_get_ipi(int hart, int *pending) return 0; }
+static int sifive_clint_get_count(struct udevice *dev, u64 *count) +{ + *count = readq((void __iomem *)MTIME_REG(dev->priv)); + + return 0; +} + +static const struct timer_ops sifive_clint_ops = { + .get_count = sifive_clint_get_count, +}; + +static int sifive_clint_probe(struct udevice *dev) +{ + int ret; + ofnode cpu; + struct timer_dev_priv *uc_priv = dev_get_uclass_priv(dev); + u32 rate; + + dev->priv = dev_read_addr_ptr(dev); + if (!dev->priv) + return -EINVAL; + + /* Did we get our clock rate from the device tree? */ + if (uc_priv->clock_rate) + return 0; + + /* Fall back to timebase-frequency */ + cpu = ofnode_path("/cpus"); + if (!ofnode_valid(cpu)) + return -EINVAL; + + ret = ofnode_read_u32(cpu, "timebase-frequency", &rate); + if (ret) + return ret; + + log_warning("missing clocks or clock-frequency property, falling back on timebase-frequency\n"); + uc_priv->clock_rate = rate; + + return 0; +} + static const struct udevice_id sifive_clint_ids[] = { - { .compatible = "riscv,clint0", .data = RISCV_SYSCON_CLINT }, + { .compatible = "riscv,clint0" }, { } };
U_BOOT_DRIVER(sifive_clint) = { .name = "sifive_clint", - .id = UCLASS_SYSCON, + .id = UCLASS_TIMER, .of_match = sifive_clint_ids, + .probe = sifive_clint_probe, + .ops = &sifive_clint_ops, .flags = DM_FLAG_PRE_RELOC, }; diff --git a/drivers/ram/sifive/Kconfig b/drivers/ram/sifive/Kconfig index 6aca22ab2a..31ad0a7e45 100644 --- a/drivers/ram/sifive/Kconfig +++ b/drivers/ram/sifive/Kconfig @@ -9,5 +9,7 @@ config SIFIVE_FU540_DDR bool "SiFive FU540 DDR driver" depends on RAM_SIFIVE default y if TARGET_SIFIVE_FU540 + select REGMAP + select SPL_REGMAP if SPL help This enables DDR support for the platforms based on SiFive FU540 SoC.