From: Markus Niebel Markus.Niebel@tqs.de
SPI_MODE_3 requires clk high when inactive. The SCLK_CTL field of the config reg was not configured in case of CPOL. Fix configuration so that SPI_MODE_3 which uses CPOL configures the clk line to be high in inactive state.
Signed-off-by: Markus Niebel Markus.Niebel@tqs.de --- changes for v2: - split original patch into two - improve commit message --- drivers/spi/mxc_spi.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c index 95dd03f..f3f029d 100644 --- a/drivers/spi/mxc_spi.c +++ b/drivers/spi/mxc_spi.c @@ -115,7 +115,8 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, { u32 clk_src = mxc_get_clock(MXC_CSPI_CLK); s32 reg_ctrl, reg_config; - u32 ss_pol = 0, sclkpol = 0, sclkpha = 0, pre_div = 0, post_div = 0; + u32 ss_pol = 0, sclkpol = 0, sclkpha = 0, sclkctl = 0; + u32 pre_div = 0, post_div = 0; struct cspi_regs *regs = (struct cspi_regs *)mxcs->base;
if (max_hz == 0) { @@ -164,8 +165,10 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, if (mode & SPI_CS_HIGH) ss_pol = 1;
- if (mode & SPI_CPOL) + if (mode & SPI_CPOL) { sclkpol = 1; + sclkctl = 1; + }
if (mode & SPI_CPHA) sclkpha = 1; @@ -180,6 +183,8 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, (ss_pol << (cs + MXC_CSPICON_SSPOL)); reg_config = (reg_config & ~(1 << (cs + MXC_CSPICON_POL))) | (sclkpol << (cs + MXC_CSPICON_POL)); + reg_config = (reg_config & ~(1 << (cs + MXC_CSPICON_CTL))) | + (sclkctl << (cs + MXC_CSPICON_CTL)); reg_config = (reg_config & ~(1 << (cs + MXC_CSPICON_PHA))) | (sclkpha << (cs + MXC_CSPICON_PHA));