Enable the clocks for spi buses 1 through 3
Signed-off-by: Angus Ainslie angus@akkea.ca --- arch/arm/include/asm/arch-imx8m/imx-regs.h | 9 +++++ arch/arm/mach-imx/imx8m/clock_imx8mq.c | 38 ++++++++++++++++++++++ 2 files changed, 47 insertions(+)
diff --git a/arch/arm/include/asm/arch-imx8m/imx-regs.h b/arch/arm/include/asm/arch-imx8m/imx-regs.h index b800da13a1..8cb499d3a3 100644 --- a/arch/arm/include/asm/arch-imx8m/imx-regs.h +++ b/arch/arm/include/asm/arch-imx8m/imx-regs.h @@ -94,6 +94,15 @@ #define SRC_DDR1_RCR_CORE_RESET_N_MASK BIT(1) #define SRC_DDR1_RCR_PRESET_N_MASK BIT(0)
+#define IMX_CSPI1_BASE 0x30820000 +#define IMX_CSPI2_BASE 0x30830000 +#define IMX_CSPI3_BASE 0x30840000 + +#define MXC_SPI_BASE_ADDRESSES \ + IMX_CSPI1_BASE, \ + IMX_CSPI2_BASE, \ + IMX_CSPI3_BASE + struct iomuxc_gpr_base_regs { u32 gpr[47]; }; diff --git a/arch/arm/mach-imx/imx8m/clock_imx8mq.c b/arch/arm/mach-imx/imx8m/clock_imx8mq.c index 60e2218a3c..834a7bfa01 100644 --- a/arch/arm/mach-imx/imx8m/clock_imx8mq.c +++ b/arch/arm/mach-imx/imx8m/clock_imx8mq.c @@ -505,6 +505,31 @@ int set_clk_qspi(void) return 0; }
+int set_clk_ecspi(int sel) +{ + int clk = ECSPI1_CLK_ROOT; + + switch (sel) { + case 1: + clk = ECSPI1_CLK_ROOT; + break; + case 2: + clk = ECSPI2_CLK_ROOT; + break; + case 3: + clk = ECSPI3_CLK_ROOT; + break; + } + + clock_enable(clk, 0); + /* + * TODO: configure clock + */ + clock_enable(clk, 1); + + return 0; +} + #ifdef CONFIG_FEC_MXC int set_clk_enet(enum enet_freq type) { @@ -772,6 +797,19 @@ int clock_init(void) clock_enable(CCGR_TSENSOR, 1); clock_enable(CCGR_OCOTP, 1);
+ /* + * set ecspi roots + */ + clock_enable(CCGR_ECSPI1, 0); + clock_enable(CCGR_ECSPI2, 0); + clock_enable(CCGR_ECSPI3, 0); + clock_set_target_val(ECSPI1_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(0)); + clock_set_target_val(ECSPI2_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(0)); + clock_set_target_val(ECSPI3_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(0)); + clock_enable(CCGR_ECSPI1, 1); + clock_enable(CCGR_ECSPI2, 1); + clock_enable(CCGR_ECSPI3, 1); + /* config GIC ROOT to sys_pll2_200m */ clock_enable(CCGR_GIC, 0); clock_set_target_val(GIC_CLK_ROOT,