4 Dec
2009
4 Dec
'09
11:23 p.m.
joe zhou wrote:
Hi,
I am using 9G20 and set eccmode NAND_ECC_NONE in u-boot, but when I try to write some data from memory into flash with u-boot interface, it failed. (sam-ba can not read this page back from nand flash, it says a bad block). but I use NAND_ECC_SOFT, it is successful. why? anyone can give some help?
Telling U-Boot to ignore ECC (why do you want to do this?) does not also tell Linux to do so.
-Scott