The purpose of patch set is to convert the board to support Device Tree and Driver Model.
They are based on the following patches: 1./ [PATCH v3 0/2] pinctrl: at91: Add pinctrl driver http://lists.denx.de/pipermail/u-boot/2016-October/270991.html 2./ [PATCH v1 0/2] ARM: dts: at91: add dts files for the boards of SAMA5D3 http://lists.denx.de/pipermail/u-boot/2016-October/271241.html 3./ [PATCH v3 0/2] serial: atmel_usart: Support to enable an early debug UART http://lists.denx.de/pipermail/u-boot/2016-October/270250.html 4./ [PATCH v2 0/3] gpio: at91_gpio: Add option and clock support http://lists.denx.de/pipermail/u-boot/2016-October/271231.html 5./ [PATCH v11] dm: at91: Add driver model support for the spi driver http://lists.denx.de/pipermail/u-boot/2016-October/271235.html 6./ [PATCH v2 0/8] board: sama5d4: convert boards to support DM/DT http://lists.denx.de/pipermail/u-boot/2016-October/271244.html
Wenyou Yang (7): board: sama5d3xek: move config options to defconfig board: sama5d3xek: clean up code board: sama5d3xek: enable early debug UART board: sama5d3_xplained: move config options to defconfig board: sama5d3_xplained: clean up code board: sama5d3_xplained: enable early debug UART configs: sama5d3_xplained: move CONFIG_SYS_NO_FLASH to defconfig
board/atmel/sama5d3_xplained/sama5d3_xplained.c | 35 +++++----- board/atmel/sama5d3xek/sama5d3xek.c | 86 +++++-------------------- configs/sama5d3_xplained_mmc_defconfig | 28 +++++++- configs/sama5d3_xplained_nandflash_defconfig | 28 +++++++- configs/sama5d3xek_mmc_defconfig | 30 ++++++++- configs/sama5d3xek_nandflash_defconfig | 31 ++++++++- configs/sama5d3xek_spiflash_defconfig | 30 ++++++++- include/configs/sama5d3_xplained.h | 10 +-- include/configs/sama5d3xek.h | 17 +---- 9 files changed, 174 insertions(+), 121 deletions(-)