Dear Ramesh,
"rameah nathan" rameshnathan007@gmail.com writes:
I have configured u-boot (U-boot-1.1.6) for my new board MPC8560ADS asper the guidelines provided in the README file.I am very new to the
Please first of all update to the top of tree git version of U-Boot. Debugging old versions is considered a waste of time.
bootloader.I made changes only in the include/configs/MPC8560ADS.h file as given by u-boot manual like (memory map of flash,DDR,Rapid i/0,pci) and baurdrate.I have attached my MPC8560ADS.h file for reference.
After flashing my u-boot in to the flash,there is no output from the minicom .I have check baurdrate and other settings.
We usually recommend using kermit instead of minicom, which has caused trouble before. Configuring it is easy:
http://www.denx.de/wiki/view/DULG/SystemSetup#Section_4.3.
When i try to debug u-boot using BDI-2001 it get struck in the file serial_ssc.c file in the function serial_putc and Program counter strucks at this place without futher increment afte single stepping. I am using SCC1 for console.
can anyone tell me what could me the problem.And how to proceed futher from here.
Please update your U-Boot first of all. If your problem persists, let us know.
Best regards
Markus Klotzbuecher
-- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de