Hi Tom,
On Tue, Jan 22, 2013 at 12:47 PM, Tom Warren twarren.nvidia@gmail.com wrote:
Simon,
On Mon, Jan 21, 2013 at 4:07 PM, Simon Glass sjg@chromium.org wrote:
Hi Stephen,
On Wed, Jan 16, 2013 at 2:51 PM, Stephen Warren swarren@wwwdotorg.org wrote:
On 01/16/2013 02:14 PM, Tom Warren wrote:
This build is stripped down. It boots to the command prompt. GPIO is the only peripheral supported. Others TBD.
diff --git a/board/nvidia/dalmore/dalmore.c b/board/nvidia/dalmore/dalmore.c
+void pinmux_init(void) +{
pinmux_config_table(tegra3_pinmux_common,ARRAY_SIZE(tegra3_pinmux_common));I assume that should say "tegra114" not "tegra3"?
diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h
+/* Must be off for Dalmore to boot !?!? FIXME */ +#define CONFIG_SYS_DCACHE_OFF
Who knows if there is any A15 core/cache controller support in U-Boot yet?
Sort-of. It works ok for me on snow, so long as you have a patch to enable L2 support.
Which patch, exactly, to enable L2 support? I'd like to test it on T114.
I was thinking about this one (it will need porting and perhaps can become partly common?)
http://patchwork.ozlabs.org/patch/202874/
Regards, Simon
Thanks
Regards, Simon
Aside from any comments I've made, the series, briefly, Reviewed-by: Stephen Warren swarren@nvidia.com _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot