Dear Albin Tonnerre,
In message 1249641457-16887-2-git-send-email-albin.tonnerre@free-electrons.com you wrote:
The Calao TNY-A9260 and TNY-9G20 are boards manufactured and sold by Calao Systems http://www.calao-systems.com. Their components are very similar to the AT91SAM9260EK board, so their configuration is based on the configuration of this board. There are however some differences: different clocks, no LCD, no ethernet. They also can use SPI EEPROM to store the environment.
...
--- a/Makefile +++ b/Makefile @@ -2838,6 +2838,25 @@ at91sam9g45ekes_config : unconfig pm9263_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
+tny_a9g20_nandflash_config \ +tny_a9g20_eeprom_config \ +tny_a9g20_config \ +tny_a9260_nandflash_config \ +tny_a9260_eeprom_config \ +tny_a9260_config : unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_ENV_IS_IN_NAND" >>$(obj)include/config.h ; \- else \
echo "#define CONFIG_ENV_IS_IN_EEPROM" >>$(obj)include/config.h ; \- fi;
- @if [ "$(findstring _a9g20,$@)" ] ; then \
echo "#define CONFIG_TNY_A9G20" >>$(obj)include/config.h ; \- else \
echo "#define CONFIG_TNY_A9260" >>$(obj)include/config.h ; \- fi;
- @$(MKCONFIG) -a tny_a9260 arm arm926ejs tny_a9260 calao at91
Please do not add such scripting to the top level Makefile. Perform it in your board config file instead.
For an example, please see http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/65499
Best regards,
Wolfgang Denk