From: Peng Fan peng.fan@nxp.com
pinctrl_wdog already marked u-boot,dm-spl, so clean up board code. set_wdog_reset function could be handled by imx_watchdog.c driver.
Signed-off-by: Peng Fan peng.fan@nxp.com --- board/toradex/verdin-imx8mp/verdin-imx8mp.c | 11 ----------- 1 file changed, 11 deletions(-)
diff --git a/board/toradex/verdin-imx8mp/verdin-imx8mp.c b/board/toradex/verdin-imx8mp/verdin-imx8mp.c index 8334c9bb376..e3c1a1201da 100644 --- a/board/toradex/verdin-imx8mp/verdin-imx8mp.c +++ b/board/toradex/verdin-imx8mp/verdin-imx8mp.c @@ -24,7 +24,6 @@ DECLARE_GLOBAL_DATA_PTR;
#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1) -#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
/* Verdin UART_3, Console/Debug UART */ static const iomux_v3_cfg_t uart_pads[] = { @@ -32,18 +31,8 @@ static const iomux_v3_cfg_t uart_pads[] = { MX8MP_PAD_UART3_TXD__UART3_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), };
-static const iomux_v3_cfg_t wdog_pads[] = { - MX8MP_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), -}; - int board_early_init_f(void) { - struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; - - imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); - - set_wdog_reset(wdog); - imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
init_uart_clk(2);