Dear Asen Dimov,
sorry for the late reply.
This patch needs to be rebased on top of u-boot-atmel/next,
also please observe the following comments:
Signed-off-by: Asen Dimov dimov@ronetix.at
board/ronetix/pm9g45/pm9g45.c | 15 +++++++++++++++ include/configs/pm9g45.h | 5 +++++ 2 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c index 79b7c9d..0e1d6b2 100644 --- a/board/ronetix/pm9g45/pm9g45.c +++ b/board/ronetix/pm9g45/pm9g45.c @@ -96,6 +96,8 @@ static void pm9g45_nand_hw_init(void) static void pm9g45_macb_hw_init(void) { at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
New name: ATMEL_BASE_PMC
- at91_rstc_t *rstc = (at91_rstc_t *) AT91_RSTC_BASE;
New name: ATMEL_BASE_RSTC
unsigned long erstl;
/*
- PD2 enables the 50MHz oscillator for Ethernet PHY
@@ -120,6 +122,19 @@ static void pm9g45_macb_hw_init(void) at91_set_pio_pullup(AT91_PIO_PORTA, 12, 0); at91_set_pio_pullup(AT91_PIO_PORTA, 13, 0);
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0x0D) |
AT91_RSTC_MR_URSTEN, &rstc->mr);- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL));
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr);
- /* Re-enable pull-up */ at91_set_pio_pullup(AT91_PIO_PORTA, 15, 1); at91_set_pio_pullup(AT91_PIO_PORTA, 12, 1);
diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index ec51ccf..4d8089f 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -125,6 +125,11 @@ #define CONFIG_NET_MULTI 1
Please no "1" where the define has no numerical significance, e.g. tested by #ifdef
#define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_RESET_PHY_R 1
ditto
+#define CONFIG_MACB_SEARCH_PHY +#define CONFIG_CMD_MII +#define CONFIG_OVERWRITE_ETHADDR_ONCE +/* MAC is Organizationally Unique Identifier + 3 octects user numbers */ +#define CONFIG_ETHADDR "02:00:00:fe:ed:00"
This is not an official OUI, neither should it be defined as a constant here... However I am not sure what the rules for boards are that apparently lack a storage medium for board-unique MAC adresses...?
Wolfgang?
/* USB */ #define CONFIG_USB_ATMEL