Hi Graeme,
On Mon, Feb 27, 2012 at 11:33 AM, Graeme Russ graeme.russ@gmail.com wrote:
Hi,
On Feb 27, 2012 4:57 PM, "Asif Sulikeri" asifiqbal.rs@gmail.com wrote:
Hi any updates on this?
Have you looked into any of my other suggestions?
Regards,
Graeme
I'm sorry don't know how I missed out to see the updated mail from you, I thought there was no response at all, sorry though.
On Sat, Feb 25, 2012 at 6:44 AM, Graeme Russ graeme.russ@gmail.com
wrote:
Hi Asif,
On 02/24/2012 04:43 PM, Asif Sulikeri wrote:
Thanks Graeme,
replies in-line,
Appreciated (after all, that is ML etiquette)
On Fri, Feb 24, 2012 at 11:01 AM, Graeme Russ <graeme.russ@gmail.com mailto:graeme.russ@gmail.com> wrote:
Hi Asif, On Fri, Feb 24, 2012 at 4:25 PM, Asif Sulikeri <asifiqbal.rs@gmail.com
<mailto:asifiqbal.rs@gmail.com>> wrote: > Hi, any updates on this, this is a blocker for me, and waitingfor your
> suggestions to resolve this issue. > > On Mon, Feb 20, 2012 at 3:45 PM, Asif Sulikeri <asifiqbal.rs@gmail.com <mailto:asifiqbal.rs@gmail.com>>wrote: > >> Detlev Zundel <dzu <at> denx.de <http://denx.de>> writes: >> >> Appreciate your reply Detlev, please find my replies in-line, >> >> > what is the "DM365-IPNC-1.0.14" version about? I cannot seesuch a
>> > version (or tag) in mainline U-Boot. >> >> I'm sorry for the typo that is supposed to be 1.0.1. >Don't expect much response if you stay with version 1.0.1I'm sorry for all the confusion, the u-boot version is actually 1.3.4
and
1.0.1 is added as a suffix for internal use, sorry for that. Am I
still not
liable to get help for this version(1.3.4) of u-boot?
Nope - 1.3.4 is 3.5 years old - more than half of the commits in
mainline
have been applied since then.
Hmmm, seems to be I'm on my own if I have decided to resolve this particular issue on this particular version.
>> > On the other hand, davinci_dm365evm is a supportedconfiguration in
>> > mainline, so why not try current code. This way we would bein a much
>> > better position to help you. >> > >> >> I'll consider the suggestion, but since I've spentconsiderable time on
>> this, >> want to make sure where actually the problem lies. Have you tried the suggestion of using the current mainline code? If the problem still exists in latest mainline, you stand a fair chance that we'll make an effort to help you out :):) Thats definitely not the way you bail me out ;), jokes apart, I
did try
using u-boot-2010.06 but the u-boot binary generated is bulky 252KB,
as
compared the usual 150KB, this leads to another blocker as the
UBL(User
Boot Loader) is now unable to load this bulky u-boot into RAM(or may
be
some other issue), and gets stuck as below:
Well 2010.06 is also very old - the latest release is 2011.12
And the increase of 100kB is massive - are you sure you are compiling
with
the same set of options defined in the board config file? If you are
sure,
then it would be interesting to find out what has caused it.
I am compiling with the default options, with no additional changes made to the conf file, the 1.3.4 version used to give me 150kB binary as compared to the 252kB binary generated by the 2010.06 version.
Could you try
some intermediate releases (2008.10 is the next release after 1.3.4)
I would definitely give it a try. I want to resolve this with whatever it takes. :)
DM36x initialization passed!
TI UBL Base Version: 1.50 Boot Loader BootMode = NAND Starting NAND Copy... Valid magicnum, 0xA1ACED66, found in block 0x00000008. Boot Mode Task Completed
IPNC UBL Version: 1.1.0 Platform: DM365
Jumping to entry point at 0x81080000
and there's no response whatsoever after this. what might be the
issue now?
This is outside my knowledge - I've Cc'd the davinci_dm365evm (Sandeep Paulraj), maybe he can provide some pointers...
Thanks for all the help, definitely appreciate your support and the early help.
Regards,
Graeme
Regards, Asif