Afterthought: I have not explained how to test this patch.
If your board is based on arm926ejs and does not have its own u-boot.lds, then you can simply applly the patch and modify your board config file as I modified edminiv2.h, basically by adding the config option CONFIG_RELOC_FIXUP_WORKS which will remove all calls to manual fixup code.
If your board is arm926ejs but has its own start.S or u-boot.lds (or both) then you'll also have to apply them the changes I made to their arm926 counterparts.
Ditto if your board is ARM but not arm926.
You should then be able to build and run.
Remember: this patch only applies to boards which boot from NOR FLASH! You can test it on other types of boards (NAND-based, etc) for regression testing, but nothing more.
Amicalement,