Hi
I just noticed that this series need to be reworked as some update has been merged on mainline since this series has been submitted on mailing list.
A v10 will be pushed today.
Sorry
Patrice
On 09/04/2017 06:03 PM, Patrice CHOTARD wrote:
Hi
Just a gentle reminder to not forget this series
Thanks
On 07/18/2017 02:31 PM, patrice.chotard@st.com wrote:
From: Patrice Chotard patrice.chotard@st.com
This series adds : _ update existing sdhci driver to use reset framework _ add usb phy driver _ add fastboot support
With all this feature enable, it's now possible to _ boot on usb mass storage device _ boot from kernel image and dtb previously loaded using tftp _ update mmc partiton using fastboot
v9: _ update doc/device-tree-bindings/phy/phy-stih407-usb.txt requested by Marek Vasut in patch 4 _ move inclusion of linux/usb/otg.h from include/dwc3-sti-glue.h to drivers/usb/host/dwc3-sti-glue.c requested by Marek Vasut in patch 7
v8: _ update failpath label names in path 7 requested by Marek Vasut
v7: _ rebase on top of dm/master to use last livetree update _ replace fdtdec_parse_phandle_with_args() by dev_read_phandle_with_args() in patch 4 _ replace uclass_get_device_by_of_offset() by uclass_get_device_by_ofnode() in patch 4
v6: _ generic ehci/ohci drivers extension has been send separately _ add reviewed-by Simon Glass
v5: _ extend generic ehci with phy _ extend generic ohci with clock, reset and phy _ remove specifi STi ehci and ohci drivers and use generic ohci/ehci ones _ update stih410-b2260 device tree to use ehci and ohci generic drivers
v4: _ use PHY uclass currently available on dm-next branch, update sti ehci, ohci and xhci drivers to use new PHY uclass.
v3: _ remove reset driver (already applied on u-boot-dm tree by Simon Glass) _ patch 4: add new USB PHY uclass requested by Simon Glass _ patch 5: convert STi usb phy driver to new USB PHY uclass _ patch 6/7: update echi/ohci drivers to use USB PHY uclass _ patch 8/9: rework xhci-sti.c and dwc3-sti.c. Previously, xhci-sti driver binded dwc3-sti (STi glue driver) which was not correct. Now we respect the device tree hierarchy, ie the STi dwc3 glue driver is first probed, then bind the xhci-sti driver.
v2: _ add Reviewed-by: Jaehoon Chung jh80.chung@samsung.com in patches 2,3 and 4 _ fix remarks done by Marek Vasut : _ patch 5 : replace bitfield_replace() by clrsetbits_le32() _ patch 6 : update error messages and add remove callback _ patch 8 : put board specific defines in a separate patch _ patch 7: use setbits_le32() instead of read, modify, write sequence and add missing parenthesis _ squash previous patches 7,9,11,12,14,16,17,18,19,20 and 21 in patch 14
Patrice Chotard (8): Patrice Chotard (10): mmc: sti_sdhci: Rework sti_mmc_core_config() ARM: dts: stih410-family: Add missing reset_names for mmc1 node mmc: sti_sdhci: Use reset framework usb: phy: Add STi USB2 PHY STiH410-B2260: enable USB Host Networking STiH410-B2260: enable USB, fastboot, reset, PHY related flags usb: dwc3: Add dwc3 glue driver support for STi ARM: dts: STiH410: set DWC3 dual role mode to peripheral ARM: dts: STiH410: update ehci and ohci compatible board: STiH410-B2260: add fastboot support
arch/arm/dts/stih407-family.dtsi | 3 +- arch/arm/dts/stih410.dtsi | 11 +- arch/arm/include/asm/arch-stih410/sys_proto.h | 11 + board/st/stih410-b2260/board.c | 42 ++++ configs/stih410-b2260_defconfig | 39 +++- doc/device-tree-bindings/phy/phy-stih407-usb.txt | 24 +++ doc/device-tree-bindings/usb/dwc3-st.txt | 60 ++++++ drivers/mmc/sti_sdhci.c | 62 +++--- drivers/phy/Kconfig | 8 + drivers/phy/Makefile | 1 + drivers/phy/sti_usb_phy.c | 181 ++++++++++++++++ drivers/usb/host/Kconfig | 9 + drivers/usb/host/Makefile | 1 + drivers/usb/host/dwc3-sti-glue.c | 257 +++++++++++++++++++++++ include/configs/stih410-b2260.h | 16 ++ include/dwc3-sti-glue.h | 41 ++++ 16 files changed, 730 insertions(+), 36 deletions(-) create mode 100644 arch/arm/include/asm/arch-stih410/sys_proto.h create mode 100644 doc/device-tree-bindings/phy/phy-stih407-usb.txt create mode 100644 doc/device-tree-bindings/usb/dwc3-st.txt create mode 100644 drivers/phy/sti_usb_phy.c create mode 100644 drivers/usb/host/dwc3-sti-glue.c create mode 100644 include/dwc3-sti-glue.h
U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot