On Wed, 2007-02-28 at 11:24 +0800, Haifeng.Wu@infineon.com wrote:
Dear All,
I'm fairly new to U-Boot and not familiar with the architecture of U-Boot. But I think the directory hierarchy can tell me that U-Boot divides all the codes into board-related, CPU-related and common. I'm interested in porting U-Boot to our hardware platform, yet I don't know which code should be modified or added.
Have some one done U-Boot porting for new hardware platform before? Would you like to share how to do it with me?
As we always do in engineering, find something similar to what you have and copy it as much as possible. If you have a new CPU, of course it's much more complicated.
Board-specific stuff is in two places in the U-boot source hierarchy:
include/configs/<YOUR_BOARD>.h - configuration information board/<your_board>/ - board-specific code
You'll also have to modify the main Makefile, again following the example of a similar board.
Make sure you start with the latest from the git repo:
cg-clone git://www.denx.de/git/<project_name> <your_repository_name>/
Recommended reading: README http://www.denx.de/wiki/DULG/Manual http://www.kernel.org/pub/software/scm/git/docs/everyday.html
regards, Ben