In current implementation we get -ETIMEDOUT error when we try to use transmit only mode (SPI_TMOD_TO) This happens because in transmit only mode input FIFO never gets any data which breaks our logic in dw_reader(): we are waiting until RX data will be ready in dw_reader, but this newer happens, so we return with error.
Fix that by using SPI_TMOD_TR instead of SPI_TMOD_TO which allows to use RX FIFO.
Signed-off-by: Eugeniy Paltsev Eugeniy.Paltsev@synopsys.com --- drivers/spi/designware_spi.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/designware_spi.c b/drivers/spi/designware_spi.c index 71d8839d55..37ce16dc11 100644 --- a/drivers/spi/designware_spi.c +++ b/drivers/spi/designware_spi.c @@ -360,7 +360,11 @@ static int dw_spi_xfer(struct udevice *dev, unsigned int bitlen, else if (rx) priv->tmode = SPI_TMOD_RO; else - priv->tmode = SPI_TMOD_TO; + /* + * In transmit only mode (SPI_TMOD_TO) input FIFO never gets + * any data which breaks our logic in poll_transfer() above. + */ + priv->tmode = SPI_TMOD_TR;
cr0 &= ~SPI_TMOD_MASK; cr0 |= (priv->tmode << SPI_TMOD_OFFSET);