From: Haibo Chen haibo.chen@nxp.com
Common code already handle the voltage switch sequence based on spec, so remove the redundant voltage switch code.
Signed-off-by: Haibo Chen haibo.chen@nxp.com --- drivers/mmc/fsl_esdhc_imx.c | 9 --------- 1 file changed, 9 deletions(-)
diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c index 637537d262..722f33c68c 100644 --- a/drivers/mmc/fsl_esdhc_imx.c +++ b/drivers/mmc/fsl_esdhc_imx.c @@ -521,15 +521,6 @@ static int esdhc_send_cmd_common(struct fsl_esdhc_priv *priv, struct mmc *mmc, goto out; }
- /* Switch voltage to 1.8V if CMD11 succeeded */ - if (cmd->cmdidx == SD_CMD_SWITCH_UHS18V) { - esdhc_setbits32(®s->vendorspec, ESDHC_VENDORSPEC_VSELECT); - - printf("Run CMD11 1.8V switch\n"); - /* Sleep for 5 ms - max time for card to switch to 1.8V */ - udelay(5000); - } - /* Workaround for ESDHC errata ENGcm03648 */ if (!data && (cmd->resp_type & MMC_RSP_BUSY)) { int timeout = 50000;