Add an example usage of binman for a sunxi board. This involves adding the image definition to the device tree and using it in the Makefile.
This is for example only.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: - Use a <dts>-u-boot.dtsi file for the binman changes
Changes in v2: None
Makefile | 4 +--- arch/arm/dts/sun7i-a20-pcduino3-u-boot.dtsi | 14 ++++++++++++++ 2 files changed, 15 insertions(+), 3 deletions(-) create mode 100644 arch/arm/dts/sun7i-a20-pcduino3-u-boot.dtsi
diff --git a/Makefile b/Makefile index a5428a2..31c9483 100644 --- a/Makefile +++ b/Makefile @@ -1121,10 +1121,8 @@ u-boot-x86-16bit.bin: u-boot FORCE endif
ifneq ($(CONFIG_SUNXI),) -OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \ - --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE - $(call if_changed,pad_cat) + $(call if_changed,binman) endif
ifneq ($(CONFIG_TEGRA),) diff --git a/arch/arm/dts/sun7i-a20-pcduino3-u-boot.dtsi b/arch/arm/dts/sun7i-a20-pcduino3-u-boot.dtsi new file mode 100644 index 0000000..5adfd9b --- /dev/null +++ b/arch/arm/dts/sun7i-a20-pcduino3-u-boot.dtsi @@ -0,0 +1,14 @@ +#include <config.h> + +/ { + binman { + filename = "u-boot-sunxi-with-spl.bin"; + pad-byte = <0xff>; + blob { + filename = "spl/sunxi-spl.bin"; + }; + u-boot-img { + pos = <CONFIG_SPL_PAD_TO>; + }; + }; +};