Re: [PATCH v3 1/4] arm: mvebu: dts: uDPU: update DTS

On 3/24/22 10:57, Robert Marko wrote:

Update the uDPU DTS to the version that is pending upstream [1][2].

[1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220322105857.1... [2] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220322105857.1...

Signed-off-by: Robert Marko robert.marko@sartura.hr

Applied to u-boot-marvell/master

Thanks, Stefan

---

arch/arm/dts/armada-3720-uDPU.dts | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/arch/arm/dts/armada-3720-uDPU.dts b/arch/arm/dts/armada-3720-uDPU.dts index 95d46e8d08..1f534c0c65 100644 --- a/arch/arm/dts/armada-3720-uDPU.dts +++ b/arch/arm/dts/armada-3720-uDPU.dts @@ -99,7 +99,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi_quad_pins>;

• m25p80@0 {

• spi-flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <54000000>;

@@ -108,10 +108,15 @@ compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>;

• 	/* only bootloader is located on the SPI */
  

• partition@0 {
  

• 		label = "uboot";
  

• 		reg = <0 0x400000>;
  

• 		label = "firmware";
  

• 		reg = <0x0 0x180000>;
  

• 	};
  

• 	partition@180000 {
  

• 		label = "u-boot-env";
  

• 		reg = <0x180000 0x10000>;
  };
  

  }; };

@@ -148,15 +153,15 @@ scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;

• lm75@48 {

• nct375@48 { status = "okay";

• compatible = "lm75";
  

• compatible = "ti,tmp75c";
  

  reg = <0x48>; };

• lm75@49 {

• nct375@49 { status = "okay";

• compatible = "lm75";
  

• compatible = "ti,tmp75c";
  

  reg = <0x49>; }; };

Viele Grüße, Stefan Roese