On Wed, Dec 29, 2021 at 05:51:14PM -0300, Fabio Estevam wrote:
Hi Tommaso,
On Wed, Dec 29, 2021 at 5:33 PM Tommaso Merciai tomm.merciai@gmail.com wrote:
Please try this patch series from Peter: https://lore.kernel.org/all/20211221123249.455347-1-pbrobinson@gmail.com/T/
Does it boot for you after applying this series?
Hi Fabio, I test this series. By that I'm able to boot the board from uSD. Thanks.
Thanks for testing. Glad to know it is booting fine.
Below some log's from the board:
U-Boot SPL 2022.01-rc4-00030-gb3f84a939f-dirty (Dec 29 2021 - 21:22:30 +0100) Trying to boot from MMC1
U-Boot 2022.01-rc4-00030-gb3f84a939f-dirty (Dec 29 2021 - 21:22:30 +0100)
CPU: Freescale i.MX6SX rev1.2 996 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 30C Reset cause: POR Model: UDOO Neo Basic Board: UDOO Neo UNDEFINED
Could you please help to investigate this output? It should not print "UNDEFINED".
Could you please add this debug patch below and let me know what it prints?
Hi Fabio, I'll check and let u know. This patch these gpio's to get righ ram cfg right?
Let me know.
Thanks, Tommaso
--- a/board/udoo/neo/neo.c +++ b/board/udoo/neo/neo.c @@ -301,6 +301,9 @@ static int get_board_value(void)
r184 = gpio_get_value(IMX_GPIO_NR(4, 13)); r185 = gpio_get_value(IMX_GPIO_NR(4, 0));
printf("********* r184 is %d\n", r184);printf("********* r185 is %d\n", r185); /* * Machine selection -DRAM: 512 MiB MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: eth0: ethernet@2188000 Hit any key to stop autoboot: 0 =>
Why this series is not already merged on mainline? Let me know.
Hopefully, Tom or Stefano can pick up Peter's series in time for the 2022.01 release.
Thanks