Hi,
We have an imx.6 based custom board and we have emmc, SD card and SPI NOR Flash(MX66L51235FZ2i-10g from Macronix) as boot devices on our board based on imx6 (MC imx6D7CVT08AE) processor.
our requirement is to boot SPL + U-boot from the SPI NOR Flash and then load the linux kernel from emmc interface.
we are able to boot the board (SPL + U-boot + Linux) through SD-card and emmc interface.
we have flashed SPL at offset value of 0x400 in Flash address using following command:
dd if=/boot/SPL of=/dev/mtd0 bs=1K seek=1
and flashed U-boot.img at offset value 0f 0x11400 using the following command:
dd if=/boot/u-boot.img of=/dev/mtd0 bs=1K seek=69
After configuring the board boot settings to load from the SPI NOR Flash when we Power on the board
we are getting following message:
U-Boot SPL 2018.01-02296-g457cdd6-dirty (Aug 27 2020 - 10:22:07)
spl:board_init_r()
SPL: Unsupported Boot Device!
Trying to boot from USB SDP
SDP: initialize...
After further debugging found that spl_ll_find_loader() function in file "u-boot\common\spl\spl.c" is unable to find the loader.
spl_ll_find_loader() is returning "0" when the board is configured to boot from SPI NOR Flash.
Following are the debug trace messages from the board when it is booted through SPI NOR Flash:
U-Boot SPL 2018.01-02296-g457cdd6-dirty (Aug 27 2020 - 10:22:07)
Entering spl_boot_device()
bmode(sbmr2):570425345
Board boot order:8
spl_ll_find_loader() returning NULL
boot_from_devices() : loader:0
SPL: Unsupported Boot Device!
spl_boot_list[1]:12
inside boot_from_devices() : loader:9528148
Trying to boot from USB SDP
spl_load_image():bootdev.boot_device:12
SDP: initialize...
Please let us know why spl_ll_find_loader() function in file "u-boot\common\spl\spl.c" is unable To return valid loader address when the board is configured to boot from SPI NOR Flash.
Are we missing any specific configuration ?
Thanks in Advance,
N.V.Murali Krishna,
Murali.krishna8@tcs.com
=====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you