From: T Karthik Reddy t.karthik.reddy@xilinx.com
Add enums for pm node id's, pm ioctl id's, tapdelay types, dll reset types
Signed-off-by: T Karthik Reddy t.karthik.reddy@xilinx.com Signed-off-by: Ashok Reddy Soma ashok.reddy.soma@xilinx.com ---
(no changes since v1)
include/zynqmp_firmware.h | 127 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 127 insertions(+)
diff --git a/include/zynqmp_firmware.h b/include/zynqmp_firmware.h index f6f82bf882..c559ee7d3c 100644 --- a/include/zynqmp_firmware.h +++ b/include/zynqmp_firmware.h @@ -62,6 +62,99 @@ enum pm_api_id { PM_API_MAX, };
+enum pm_node_id { + NODE_UNKNOWN = 0, + NODE_APU = 1, + NODE_APU_0 = 2, + NODE_APU_1 = 3, + NODE_APU_2 = 4, + NODE_APU_3 = 5, + NODE_RPU = 6, + NODE_RPU_0 = 7, + NODE_RPU_1 = 8, + NODE_PLD = 9, + NODE_FPD = 10, + NODE_OCM_BANK_0 = 11, + NODE_OCM_BANK_1 = 12, + NODE_OCM_BANK_2 = 13, + NODE_OCM_BANK_3 = 14, + NODE_TCM_0_A = 15, + NODE_TCM_0_B = 16, + NODE_TCM_1_A = 17, + NODE_TCM_1_B = 18, + NODE_L2 = 19, + NODE_GPU_PP_0 = 20, + NODE_GPU_PP_1 = 21, + NODE_USB_0 = 22, + NODE_USB_1 = 23, + NODE_TTC_0 = 24, + NODE_TTC_1 = 25, + NODE_TTC_2 = 26, + NODE_TTC_3 = 27, + NODE_SATA = 28, + NODE_ETH_0 = 29, + NODE_ETH_1 = 30, + NODE_ETH_2 = 31, + NODE_ETH_3 = 32, + NODE_UART_0 = 33, + NODE_UART_1 = 34, + NODE_SPI_0 = 35, + NODE_SPI_1 = 36, + NODE_I2C_0 = 37, + NODE_I2C_1 = 38, + NODE_SD_0 = 39, + NODE_SD_1 = 40, + NODE_DP = 41, + NODE_GDMA = 42, + NODE_ADMA = 43, + NODE_NAND = 44, + NODE_QSPI = 45, + NODE_GPIO = 46, + NODE_CAN_0 = 47, + NODE_CAN_1 = 48, + NODE_EXTERN = 49, + NODE_APLL = 50, + NODE_VPLL = 51, + NODE_DPLL = 52, + NODE_RPLL = 53, + NODE_IOPLL = 54, + NODE_DDR = 55, + NODE_IPI_APU = 56, + NODE_IPI_RPU_0 = 57, + NODE_GPU = 58, + NODE_PCIE = 59, + NODE_PCAP = 60, + NODE_RTC = 61, + NODE_LPD = 62, + NODE_VCU = 63, + NODE_IPI_RPU_1 = 64, + NODE_IPI_PL_0 = 65, + NODE_IPI_PL_1 = 66, + NODE_IPI_PL_2 = 67, + NODE_IPI_PL_3 = 68, + NODE_PL = 69, + NODE_GEM_TSU = 70, + NODE_SWDT_0 = 71, + NODE_SWDT_1 = 72, + NODE_CSU = 73, + NODE_PJTAG = 74, + NODE_TRACE = 75, + NODE_TESTSCAN = 76, + NODE_PMU = 77, + NODE_MAX = 78, +}; + +enum tap_delay_type { + PM_TAPDELAY_INPUT = 0, + PM_TAPDELAY_OUTPUT = 1, +}; + +enum dll_reset_type { + PM_DLL_RESET_ASSERT = 0, + PM_DLL_RESET_RELEASE = 1, + PM_DLL_RESET_PULSE = 2, +}; + enum pm_query_id { PM_QID_INVALID = 0, PM_QID_CLOCK_GET_NAME = 1, @@ -79,6 +172,40 @@ enum pm_query_id { PM_QID_CLOCK_GET_MAX_DIVISOR = 13, };
+enum pm_ioctl_id { + IOCTL_GET_RPU_OPER_MODE, + IOCTL_SET_RPU_OPER_MODE, + IOCTL_RPU_BOOT_ADDR_CONFIG, + IOCTL_TCM_COMB_CONFIG, + IOCTL_SET_TAPDELAY_BYPASS, + IOCTL_SET_SGMII_MODE, + IOCTL_SD_DLL_RESET, + IOCTL_SET_SD_TAPDELAY, + IOCTL_SET_PLL_FRAC_MODE, + IOCTL_GET_PLL_FRAC_MODE, + IOCTL_SET_PLL_FRAC_DATA, + IOCTL_GET_PLL_FRAC_DATA, + IOCTL_WRITE_GGS, + IOCTL_READ_GGS, + IOCTL_WRITE_PGGS, + IOCTL_READ_PGGS, + /* IOCTL for ULPI reset */ + IOCTL_ULPI_RESET, + /* Set healthy bit value*/ + IOCTL_SET_BOOT_HEALTH_STATUS, + IOCTL_AFI, + /* Probe counter read/write */ + IOCTL_PROBE_COUNTER_READ, + IOCTL_PROBE_COUNTER_WRITE, + IOCTL_OSPI_MUX_SELECT, + /* IOCTL for USB power request */ + IOCTL_USB_SET_STATE, + /* IOCTL to get last reset reason */ + IOCTL_GET_LAST_RESET_REASON, + /* AIE ISR Clear */ + IOCTL_AIE_ISR_CLEAR, +}; + #define PM_SIP_SVC 0xc2000000
#define ZYNQMP_PM_VERSION_MAJOR 1