Hi Daniel,
On sam., déc. 15 2018, Daniel Schwierzeck daniel.schwierzeck@gmail.com wrote:
Am 14.12.18 um 16:16 schrieb Gregory CLEMENT:
Adding the support for the Luton boards PCB91 which share common code with the Ocelots boards, including board code, device tree and configuration.
Signed-off-by: Gregory CLEMENT gregory.clement@bootlin.com
MAINTAINERS | 1 + arch/mips/dts/luton_pcb091.dts | 36 ++++++++++++++ arch/mips/dts/mscc,luton.dtsi | 87 ++++++++++++++++++++++++++++++++++ arch/mips/mach-mscc/Kconfig | 2 + board/mscc/luton/Kconfig | 14 ++++++ board/mscc/luton/Makefile | 3 ++ board/mscc/luton/luton.c | 28 +++++++++++ configs/mscc_luton_defconfig | 66 ++++++++++++++++++++++++++ 8 files changed, 237 insertions(+) create mode 100644 arch/mips/dts/luton_pcb091.dts create mode 100644 arch/mips/dts/mscc,luton.dtsi create mode 100644 board/mscc/luton/Kconfig create mode 100644 board/mscc/luton/Makefile create mode 100644 board/mscc/luton/luton.c create mode 100644 configs/mscc_luton_defconfig
diff --git a/configs/mscc_luton_defconfig b/configs/mscc_luton_defconfig new file mode 100644 index 0000000000..47fe12b6ee --- /dev/null +++ b/configs/mscc_luton_defconfig @@ -0,0 +1,66 @@ +CONFIG_MIPS=y +CONFIG_SYS_TEXT_BASE=0x40000000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_BASE=0x70100000 +CONFIG_DEBUG_UART_CLOCK=208333333 +CONFIG_ARCH_MSCC=y +CONFIG_TARGET_LUTON_PCB091=y +CONFIG_DDRTYPE_MT47H128M8HQ=y +CONFIG_SYS_LITTLE_ENDIAN=y +CONFIG_MIPS_BOOT_FDT=y +CONFIG_DEFAULT_DEVICE_TREE="luton_pcb091" +CONFIG_DEBUG_UART=y +CONFIG_FIT=y +CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200" +CONFIG_LOGLEVEL=7 +CONFIG_DISPLAY_CPUINFO=y +CONFIG_SYS_PROMPT="pcb091 # " +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_ELF is not set +# CONFIG_CMD_EXPORTENV is not set +# CONFIG_CMD_IMPORTENV is not set +# CONFIG_CMD_CRC32 is not set +CONFIG_CMD_MD5SUM=y +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_DHCP=y +# CONFIG_NET_TFTP_VARS is not set +# CONFIG_CMD_NFS is not set +CONFIG_CMD_PING=y +CONFIG_CMD_MTDPARTS=y +CONFIG_MTDIDS_DEFAULT="nor0=spi_flash" +CONFIG_MTDPARTS_DEFAULT="mtdparts=spi_flash:512k(UBoot),256k(Env),256k(conf),6m@1m(linux)" +# CONFIG_ISO_PARTITION is not set +CONFIG_OF_EMBED=y
this gives now a build warning
===================== WARNING ====================== CONFIG_OF_EMBED is enabled. This option should only be used for debugging purposes. Please use CONFIG_OF_SEPARATE for boards in mainline. See doc/README.fdt-control for more info. ====================================================
I did not get this warning. For now I base my series on v2018.11, should I base it on v2019.01-rc1 (i didn't realized it was already released) ?
Shall I change it when applying or do you want to test it first and send a follow-up patch?
I'd like to test it to be sure it continue to work.
Thanks,
Gregory
+CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_CLK=y +CONFIG_DM_GPIO=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_SPI_FLASH_MTD=y +CONFIG_DM_ETH=y +CONFIG_PINCTRL=y +CONFIG_PINCONF=y +CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_SOFT_SPI=y +CONFIG_LZMA=y +CONFIG_XZ=y
--
- Daniel