Re: [U-Boot] [PATCH] mx6sabresd: Move the DCD settings to spl code

Hi Fabio,

On 11/13/2014 11:58 PM, Fabio Estevam wrote:

From: Fabio Estevam fabio.estevam@freescale.com

mx6sabresd_spl.cfg configures CCM registers, GPR registers and CCM_CCOSR.

Move the configuration to the spl code.

I forgot to asker earlier, but what are the benefits of going from DCD to SPL code to provide HW initialization?

Regards, Nikolay