Aneesh, [snip..]
>> If we are built with D-CACHE enabled but have run 'dcache off' and
then
>> >> attempt to flush unaligned regions we spam the console with
problems
>> >> that aren't true (as the cache was off). >> > Today we do cache maintenance operations after the dcache is
turned off.
> > One example is before jumping to kernel, we try to invalidate
the caches,
> > in cache turned off state. So with this patch those maintenance
calls will
> > do nothing, which is not correct.
Ah yes, But, shouldn't we be doing these same operations as part of turning the cache off?
The problem is that while turning of dcaches, we flush it, and
turn
cache and MMU off. But these operations are not happening automatically in a single call. So there is a chance of valid entries present in cache even after it is OFF.
I think this is what we need to fix. Otherwise, Tom's change looks good to me. How about an invalidate in dcache_disable() or something like that?
Correct. So if the cleaning up sequence is fine, then ok. So there should be no need to check if caches are OFF inside the maintenance functions. Kernel does not looks like doing such checks. The real issue looks like we should have had assembly level functions to do the cleanup routines for flush-invalidate-turn OFF caches/MM atomically.
Actually, with something like speculation in the behind, only way of ensuring that we do not have any valid entries is to do a invalidate all, after turn of caches/mmu. So this means that we will have a maintenance after turning off.
Good point. But we need that invalidate just one last time after the disable, right? How about making the cache_status a variable rather than reading the C bit. And then disable_cache() shall be like this:
- Flush all
- Disable C bit
- Invalidate all
- cache_status = disabled
Maybe, not the best solution. But I can't think of anything better. Please note that after this point there won't be any valid entries in the cache per ARMv7 Architecture reference manual(section B2.2.2):
"If the cache is disabled, it is guaranteed that no new allocation of memory locations into the cache will occur."
I agree on this sequence. But the only thing is, is it good to turn off the caches runtime, because one driver cant do aligned access ? Will this then not become a custom, say any other driver which sees problem with cache, will then simply go ahead disable and proceed. Is that right ?. yes, having enabled caches we are missing things like UNCACHED allocations, IO etc, but that is going to make boot loaders more heavy, may be.
In the end, I am not sure which is the right decision to take here :)
Thanks, Sricharan